Peavey USB-P USB Playback Audio Interface Instruction Manual

Indledning

The Peavey USB-P USB Playback Audio Interface is a class-compliant audio device designed to provide high-quality audio output from your computer to a sound system. It features transformer isolation and ground-lifted balanced outputs to ensure clean, noise-free audio. This manual provides essential information for setting up, operating, and maintaining your device.

Hvad er der i æsken

• Peavey USB-P USB Playback Audio Interface
• USB Transformer Isolation (integrated)

Produkt overview

Frontpanel

The front panel of the Peavey USB-P features the USB input port for connecting to your computer. It also includes a STEREO/MONO switch to select the desired output mode and an 'ON' indicator light to confirm power status.

Bagpanel

The rear panel provides two balanced XLR outputs (LEFT and RIGHT) for connecting to a mixer or powered speakers. These outputs are ground-lifted and transformer-isolated to prevent hum and noise.

Opsætning

Tilslutning til din computer

1. Connect the USB-P to an available USB port on your computer using a standard USB cable.
2. The device is a standard USB class-compliant audio device, meaning it typically does not require special drivers for most operating systems (Linux, Windows, macOS). Your computer should automatically recognize and install the necessary components.

Tilslutning til et lydsystem

1. Connect the LEFT and RIGHT XLR outputs on the rear panel of the USB-P to the corresponding inputs on your mixer or powered speakers using balanced XLR cables.
2. Ensure your mixer or speakers are powered off before making connections to prevent damage.

Betjeningsvejledning

Lydafspilning

1. Once connected, select the "Peavey USB-P" as your audio output device in your computer's sound settings or your digital audio workstation (DAW).
2. Begin playing audio from your computer. The "ON" indicator light on the front panel will confirm the device is receiving power and operating.
3. Adjust the output volume from your computer or mixer to achieve the desired listening level. The USB-P itself does not have a volume control.

Stereo/Mono Output Selection

• Use the STEREO/MONO switch on the front panel to select between stereo and mono output modes.
• In stereo mode, audio will be sent as separate left and right channels.
• In mono mode, the left and right channels will be summed to a single mono signal and sent to both XLR outputs. This is useful for applications where a single, combined audio signal is preferred.

Fejlfinding

Ingen lydudgang

• Tjek USB-forbindelse: Ensure the USB cable is securely connected to both the USB-P and your computer.
• Bekræft strøm: Confirm the "ON" indicator light on the USB-P is illuminated.
• Computerlydindstillinger: Make sure "Peavey USB-P" is selected as the default audio output device in your computer's sound settings.
• Mixer/Speaker Connections: Double-check that the XLR cables are correctly connected to your mixer or powered speakers and that their input levels are appropriately set.

Hum or Noise in Audio

• The USB-P features transformer isolation and ground-lifted balanced outputs specifically designed to minimize hum and noise.
• Tjek kabler: Ensure you are using balanced XLR cables for output connections. Unbalanced cables can introduce noise.
• Strømkilde: If using a laptop, try running it on battery power to see if the noise is related to the laptop's power supply.
• Jordsløjfer: The device's design helps prevent ground loops. If noise persists, check other components in your audio chain for potential ground loop issues.

Specifikationer

Garanti og support

For warranty information and technical support, please refer to the official Peavey Electronics webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til eventuelle garantikrav.