Indledning
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the Testo 400563 4354 IAQ Kit. This device is designed for simple and intuitive operation for reading, saving, and analyzing ventilation and indoor air quality parameters, including Relative Humidity (RH), Temperature, Carbon Dioxide (CO2), and Barometric Pressure.
Sikkerhedsoplysninger
Please read this section carefully before operating the device. Failure to comply with these instructions may result in injury or damage to the instrument.
- Always operate the device within its specified operating temperature and humidity ranges.
- Do not expose the device to extreme temperatures, direct sunlight, or corrosive environments.
- Undgå at tabe eller udsætte enheden for kraftige stød.
- Only use specified batteries and dispose of them properly.
- Forsøg ikke at åbne eller reparere enheden selv. Overlad al service til kvalificeret personale.
- Hold enheden ren og fri for støv og snavs.
Produkt overview
The Testo 400563 4354 IAQ Kit is a versatile instrument for environmental measurements. Familiarize yourself with its components:
Figur 1: Testo 435-4 IAQ Meter. This image displays the handheld meter, featuring a large digital display at the top showing readings like "1037 ppm" and "934.4 m³/h". Below the screen are several control buttons: three orange circular buttons at the top, followed by two grey arrow buttons (up and down), another grey circular button, and finally a power button with a power symbol. The device has a sleek, ergonomic design with a black body and silver-colored accents.
Nøglekomponenter:
- Vise: Large LCD for clear reading of measurement values and menu navigation.
- Kontrolknapper: Intuitive buttons for power, navigation, selection, and function activation.
- Sensor Input: Port for connecting various probes (e.g., CO2, humidity, temperature).
- Batterirum: Located at the rear for power supply.
Opsætning
1. Batteriinstallation:
- Find batteridækslet på bagsiden af enheden.
- Open the cover by sliding or unscrewing it (refer to specific model instructions if screws are present).
- Insert the required batteries (e.g., AA or AAA, typically 3 or 4) ensuring correct polarity (+/-).
- Luk batterirummets dæksel forsvarligt.
2. Probetilslutning:
- Connect the desired measurement probe (e.g., CO2 probe, humidity/temperature probe) to the designated input port on the device.
- Ensure the connection is firm and secure to prevent inaccurate readings.
Betjeningsvejledning
1. Tænd/sluk:
- For at tænde skal du trykke på og holde nede Magt button (usually marked with Ⓢ) until the display illuminates.
- For at slukke, skal du trykke på og holde nede Magt knappen igen, indtil displayet slukker.
2. Målinger:
- Once powered on and a probe is connected, the device will typically display real-time measurements for the connected parameters (e.g., CO2 in ppm, Temperature in °C/°F, RH in %).
- Position the probe in the environment you wish to measure. Ensure proper air circulation around the sensor for accurate readings.
- Allow a few moments for readings to stabilize, especially for CO2 and humidity.
3. Navigating Menus and Saving Data:
- Brug Op/Ned arrow buttons to navigate through different measurement modes or menu options.
- Tryk på Indtast/OK button (often a central circular button) to select an option or confirm a setting.
- To save a measurement, look for a Spare or Hukommelse button/option. Follow the on-screen prompts to store data.
- To recall saved data, navigate to the Hukommelse or Minde om menuvalg.
Opretholdelse
1. Rengøring:
- Tør enheden c afasing med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Ensure no liquid enters the sensor openings or electrical connections.
- For probes, follow specific cleaning instructions provided with the probe itself.
2. Batteriudskiftning:
- Udskift batterierne, når indikatoren for lavt batteriniveau vises på displayet.
- Always use new batteries of the specified type.
- Bortskaf gamle batterier i henhold til lokale regler.
3. Kalibrering:
- Regular calibration is essential for maintaining measurement accuracy.
- Refer to the device's on-screen calibration menu or consult Testo's official support for recommended calibration intervals and procedures.
- Some probes may require specific calibration gases or humidity standards.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Døde eller forkert installerede batterier. | Kontroller batteripolariteten; udskift med nye batterier. |
| Upræcise aflæsninger. | Sensor dirty, damaged, or out of calibration; improper probe connection. | Clean sensor; ensure probe is securely connected; perform calibration. |
| Display shows "Error" or "---". | Sensor malfunction; out of measurement range; internal error. | Check probe connection; move to an environment within measurement range; restart device; contact support if persistent. |
| Kan ikke gemme data. | Memory full; incorrect save procedure. | Delete old data; refer to operating instructions for saving data. |
Specifikationer
The following specifications are for the Testo 400563 4354 IAQ Kit:
- Produkttype: CO2/Temp/RH/Barometric Meter
- Model: 400563 4354
- Mærke: Testo
- Varenummer: AO-10382-23
- Pakkemængde: HVER
- Pakkedimensioner: 16.3 x 13 x 4.3 tommer; 8.2 pund
- ASIN: B00481RUUA
- Første tilgængelige: 18. juli 2012
Note: Specific measurement ranges and accuracies depend on the probes used with the device. Refer to individual probe documentation for detailed specifications.
Garanti og support
For warranty information, technical support, or service inquiries, please contact Testo customer service or visit their official webwebsted.
Du kan finde mere information og kontaktoplysninger på Testo-butik på Amazon.
