Antec High Current Gamer HCG-750 Power Supply User Manual

1. Introduktion

This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Antec High Current Gamer HCG-750 Power Supply. Please read this manual thoroughly before installation and retain it for future reference.

Image 1.1: The Antec High Current Gamer HCG-750 Power Supply. This image displays the power supply unit from an angled perspective, highlighting its black and red casing, fan grille, and power input port.

2. Sikkerhedsoplysninger

Overhold følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:

• Ensure the power supply is disconnected from the AC outlet before installation or handling.
• Åbn ikke strømforsyningen casing. Høj volumentagDer er ingen dele indeni, og der er ingen dele, som brugeren kan servicere. Åbning af enheden vil ugyldiggøre garantien.
• Installer strømforsyningen i et godt ventileret område, væk fra varmekilder og direkte sollys.
• Brug kun de kabler, der følger med strømforsyningen.
• This product is designed for use in computer systems. Do not use it for other applications.
• Opbevares utilgængeligt for børn.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Antec High Current Gamer HCG-750 Power Supply Unit
• AC strømledning
• Modular Cable Set
• Monteringsskruer
• Brugervejledning (dette dokument)

4. Opsætning og installation

Follow these steps for proper installation of the power supply into your computer system:

1. Forbered dit system:

   Before beginning, ensure your computer is powered off and unplugged from the wall outlet. Open your computer case to access the power supply mounting area.

2. Fjern den gamle strømforsyning (hvis relevant):

   Disconnect all cables from the old power supply to your motherboard, graphics card, and other components. Unscrew and remove the old power supply from the case.
3. Install the HCG-750:

   Carefully place the Antec HCG-750 into the power supply bay of your computer case. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards if there's a bottom vent, or upwards if not). Secure the power supply with the provided mounting screws.

4. Tilslut hovedstrømkabler:
   • Connect the 24-pin ATX power cable to the motherboard.
   • Connect the 4+4-pin or 8-pin EPS12V CPU power cable to the motherboard.
5. Connect Peripheral Power Cables:
   • Connect 6+2-pin PCI-E cables to your graphics card(s) as required. The HCG-750 supports NVIDIA SLI and ATI CrossFire configurations.
   • Tilslut SATA-strømkabler til dine harddiske, SSD'er og optiske drev.
   • Connect Molex power cables to any other peripherals that require them.
6. Kabelstyring:

   Route cables neatly behind the motherboard tray or in other designated areas of your case to improve airflow and aesthetics.

7. Endelig kontrol:

   Dobbelttjek alle forbindelser for at sikre, at de er sikre. Luk computerens kabinet.

5. Betjeningsvejledning

The Antec HCG-750 is designed for reliable and efficient operation.

• Tænd: Connect the AC power cord to the power supply and then to a wall outlet. Ensure the power switch on the back of the power supply is in the 'ON' (I) position. You can then power on your computer using its front panel power button.
• Sluk: Shut down your computer through the operating system. Once the system is off, you can switch the power supply to the 'OFF' (O) position if you intend to disconnect it or perform maintenance.
• 80 PLUS BRONZE Certification: This power supply features 80 PLUS BRONZE certification, indicating high energy efficiency. This means less wasted heat and lower electricity consumption compared to non-certified power supplies.
• Kontinuerlig effekt: The HCG-750 provides 750 Watts of continuous power, ensuring stable and consistent performance for your components under various loads.

6. Vedligeholdelse

Korrekt vedligeholdelse er med til at sikre strømforsyningens levetid og optimale ydeevne.

• Rensning: Periodically clean the exterior of the power supply and its fan grille using a soft, dry cloth. For internal cleaning, use compressed air to gently remove dust from the fan and vents. Always disconnect the power supply from the AC outlet before cleaning.
• Ventilation: Ensure that the power supply's intake and exhaust vents are not obstructed. Maintain adequate airflow within your computer case.
• Miljøforhold: Brug strømforsyningen inden for de anbefalede temperatur- og luftfugtighedsområder. Undgå ekstreme forhold.

7. Fejlfinding

If you encounter issues with your Antec HCG-750 power supply, refer to the following common troubleshooting steps:

• Ingen strøm:
  • Kontroller, om netledningen er korrekt tilsluttet både strømforsyningen og stikkontakten.
  • Ensure the power switch on the back of the power supply is in the 'ON' (I) position.
  • Kontroller, at stikkontakten fungerer ved at tilslutte en anden enhed.
  • Confirm all internal power cables (24-pin ATX, EPS12V, PCI-E) are firmly seated.
• Systemustabilitet/Tilfældige nedlukninger:
  • Ensure the power supply is adequately rated for all your system components. The HCG-750 provides 750W, which is sufficient for most high-performance systems, including those with multiple GPUs.
  • Check for overheating. Ensure proper case ventilation and that the power supply fan is operating.
  • If possible, test the power supply with a different set of components or in another system to isolate the issue.
• Usædvanlige lyde:
  • A slight fan noise is normal during operation. If you hear grinding, clicking, or excessive noise, ensure no cables are obstructing the fan.
  • If the noise persists and is abnormal, discontinue use and contact Antec support.

If these steps do not resolve the issue, please contact Antec customer support for further assistance.

8. Specifikationer

9. Garanti og support

Antec products are manufactured to high quality standards. For warranty information and technical support, please refer to the official Antec webwebsted eller kontakt deres kundeserviceafdeling.

For de seneste supportressourcer, besøg: www.antec.com/support