1. Introduktion
This manual provides essential information for the proper setup, operation, and maintenance of your Thorens TD-235 Semi-automatic Turntable. Please read these instructions carefully before using your turntable to ensure optimal performance and longevity of the unit.
2. Sikkerhedsinstruktioner
- Udsæt ikke enheden for regn eller fugt.
- Åbn ikke kabinettet. Overlad al service til kvalificeret personale.
- Sørg for, at pladespilleren er placeret på en stabil, plan overflade væk fra direkte sollys, varmekilder og overdreven vibration.
- Tag netledningen ud af stikkontakten, hvis enheden ikke skal bruges i længere tid.
- Handle the stylus with care to prevent damage and ensure proper playback.
3. Pakkens indhold
Kontroller, at alle nedenstående varer er til stede i emballagen:
- Thorens TD-235 Turntable Unit
- Støvdæksel
- Platter
- Kør bælte
- Filtmåtte
- Modvægt
- Anti-skating vægt
- Strømadapter
- Audio Cable (RCA)
- AT-95E Cartridge (pre-installed or separate)
- Brugervejledning (dette dokument)
4. Opsætning
4.1 Udpakning og placering
Carefully remove all components from the packaging. Place the turntable on a flat, stable surface. Ensure adequate ventilation around the unit.
4.2 Montering af plade og bånd
- Placer tallerkenen på den midterste spindel.
- Locate the drive belt. Carefully stretch the belt around the inner rim of the platter and then around the motor pulley. Ensure the belt is not twisted.
- Læg filtmåtten oven på fadet.

Billede: Top-down view of the Thorens TD-235 turntable with the dust cover closed, illustrating the assembled unit.

Billede: Intern view of the Thorens TD-235 turntable with the platter removed, showing the motor and belt drive system for installation reference.
4.3 Cartridge and Tonearm Setup
The TD-235 typically comes with an AT-95E cartridge pre-installed. If not, carefully mount the cartridge to the headshell following the cartridge manufacturer's instructions.
- Justering af modvægt: Slide the counterweight onto the rear of the tonearm. Adjust it until the tonearm is balanced and floats horizontally. Lock the counterweight in place.
- Tracking Force Setting: Refer to the cartridge specifications (e.g., 2.0 grams for AT-95E). Rotate the numbered ring on the counterweight to the desired tracking force without moving the counterweight itself.
- Justering af anti-skating: Attach the anti-skating weight to the small fishing line and loop it over the anti-skating rod. Set the anti-skating force to match the tracking force.

Billede: Detaljeret view of the tonearm assembly, highlighting the cartridge, counterweight, and anti-skating system for precise adjustment.
4.4 Montering af støvdæksel
Insert the hinges of the dust cover into the receptacles at the rear of the turntable plinth.
4.5 Lyd- og strømtilslutninger
- Connect the integrated RCA audio cables from the turntable to the PHONO input of your amplifier or receiver. Ensure the ground wire is connected to the ground terminal on your amplivligere.
- Connect the power adapter to the DC input on the turntable and then plug it into a wall outlet.
5. Betjeningsvejledning
5.1 Tænd/sluk
The turntable powers on automatically when the tonearm is moved over the platter and powers off when the tonearm returns to its rest or after the record finishes playing.
5.2 hastighedsvalg
Use the speed selector switch, typically located on the front left of the plinth, to choose between 33 1/3 RPM for LPs and 45 RPM for singles. Ensure the correct speed is selected for the record you are playing.
5.3 Afspilning af en plade
- Place a record on the felt mat on the platter.
- Lås tonearmen op fra dens hvileposition.
- Løft forsigtigt tonearmen ved hjælp af cue-håndtaget.
- Move the tonearm over the desired starting groove of the record. The platter should begin to spin automatically.
- Lower the cueing lever slowly to allow the stylus to descend onto the record.

Image: The Thorens TD-235 turntable with its dust cover open, ready for operation, displaying the main components.
5.4 Stop afspilning
When the record reaches the end of the last track, the tonearm will automatically lift and return to its rest, and the platter will stop spinning. To stop playback manually:
- Løft tonearmen ved hjælp af cue-håndtaget.
- Gently guide the tonearm back to its rest.
- Sænk køhåndtaget.
- Lock the tonearm in its rest position. The platter should stop spinning shortly after.
6. Vedligeholdelse
6.1 Rengøring af pennen
Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front. A dirty stylus can degrade sound quality and damage records.
6.2 Rengøringsoptegnelser
Keep your records clean to prevent dust and debris from accumulating on the stylus. Use a carbon fiber brush or a record cleaning solution and cloth before each play.
6.3 Rengøring af drejeskiven
Wipe the plinth and dust cover with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp en tør klud kan bruges. Undgå skrappe kemikalier eller slibende rengøringsmidler.
6.4 Udskiftning af drivrem
The drive belt may stretch or degrade over time, affecting speed stability. Replace the belt if you notice inconsistent speed or if it appears worn. Refer to section 4.2 for installation.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd eller lav lydstyrke | Ukorrekt amplifier input, loose connections, damaged stylus/cartridge. | Ensure RCA cables are securely connected to the PHONO input. Check ground wire. Inspect stylus for damage. |
| Forvrænget lyd | Dirty stylus, incorrect tracking force/anti-skating, damaged record. | Clean stylus. Re-adjust tracking force and anti-skating. Try a different record. |
| Forkert afspilningshastighed | Wrong speed selected, worn drive belt. | Verify speed selector switch. Inspect and replace drive belt if necessary. |
| Platter does not spin automatically | Tonearm not moved far enough over platter, power issue. | Ensure tonearm is moved fully over the record area. Check power connection. |
| Automatic stop/return not working | Mechanism obstruction, internal issue. | Ensure no physical obstructions. If problem persists, contact Thorens support. |
8. Specifikationer
- Model: Thorens TD-235
- Type: Semi-automatic Turntable
- Motortype: DC motor
- Hastigheder: 33 1/3, 45 omdr./min
- Patron: AT-95E (included)
- Signalformat: Analog
- Signal-til-støjforhold: 72 dB
- Strømkilde: Elektrisk med ledning
- Produktdimensioner: 16.14 x 13.39 x 5.12 tommer (410 x 340 x 130 mm)
- Varens vægt: 14.77 pund (6.7 kg)
- Fabrikant: Thorens
9. Garanti og support
Thorens products are covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Thorens website for detailed warranty terms and conditions. For technical support or service inquiries, please contact your authorized Thorens dealer or the Thorens customer service department.
For further assistance, you may visit the official Thorens webwebsted: www.thorens.com





