CTEK 56-629

CTEK INDIKATORØJE M6: LED-batteriopladningsindikator Brugermanual

Mærke: CTEK

Model: 56-629

1. Introduktion

The CTEK INDICATOR EYELET M6 is an LED indicator designed to provide a clear and simple display of your 12V lead-acid battery's charge status. It features 6mm eyelets for permanent connection to hard-to-reach batteries, ensuring a quick and secure way to monitor and connect to a compatible CTEK charger (up to 10A).

CTEK INDICATOR EYELET M6 product with packaging

Figur 1: CTEK INDICATOR EYELET M6, showing the product and its packaging. This device provides a visual indication of battery charge status.

2. Hvad er der i æsken

3. Sikkerhedsoplysninger

Always read and understand the safety instructions provided with your battery and charger before use. Failure to do so may result in serious injury or damage to the product or battery.

4. Opsætning og installation

The CTEK INDICATOR EYELET M6 is designed for permanent installation on your battery, providing convenient access for charge monitoring and connection to a CTEK charger.

  1. Klargør batteriet: Ensure your vehicle's ignition is off and the battery terminals are clean and free from corrosion.
  2. Connect the Eyelets:
    • Tilslut red eyelet til positiv (+) batteripol.
    • Tilslut black eyelet til negativ (-) batteripol.
    Close-up of red and black eyelets for battery connection

    Figur 2: The red and black eyelets are designed for secure, permanent attachment to your battery terminals. Ensure correct polarity: red to positive, black to negative.

  3. Sikre forbindelserne: Tighten the nuts on the battery terminals to ensure a secure connection. Do not overtighten.
  4. Position the Indicator: Route the cable and position the LED indicator in an easily accessible location, away from moving parts or excessive heat. The indicator features a protective cap for the connector.
    Close-up of the CTEK indicator connector with protective cap

    Figur 3: The connector end of the indicator, showing the protective cap that shields the connection points from dust and moisture when not in use.

  5. Integreret sikring: The indicator cable includes an inline fuse for protection. Ensure the fuse holder is securely closed.
    Close-up of the inline fuse holder on the indicator cable

    Figur 4: Detail of the inline fuse holder, which provides essential overcurrent protection for the battery and connected devices.

5. Operating the LED Indicator

The CTEK INDICATOR EYELET M6 uses a simple "traffic light" system to display the battery's charge status:

To charge your battery, simply remove the protective cap from the indicator's connector and attach a compatible CTEK charger (up to 10A) to the connector. The charger will then proceed with its charging cycle.

6. Vedligeholdelse

Regular maintenance ensures optimal performance and longevity of your CTEK INDICATOR EYELET M6 and your battery:

7. Fejlfinding

ProblemMulig årsagLøsning
Intet LED-lysLoose connection, blown fuse, or completely discharged battery.Check eyelet connections. Inspect and replace the inline fuse if blown. Attempt to charge the battery with a compatible CTEK charger.
Incorrect LED color (e.g., Red when battery is known to be charged)Faulty indicator or battery issue.Bekræft batteri voltage med et multimeter. Hvis batteriets volumtage is normal, the indicator may be faulty and require replacement.

8. Specifikationer

9. Garanti og support

The CTEK INDICATOR EYELET M6 comes with a 2 års garanti from the date of purchase. For warranty claims, technical support, or further assistance, please contact CTEK customer service or visit the official CTEK webwebsted.

Du kan finde mere information og support på CTEK-butik på Amazon.

Relaterede dokumenter - 56-629

Preview CTEK MXS 5.0 Batterioplader Brugermanual
Omfattende brugermanual til CTEK MXS 5.0 (1090) 12V batterioplader, der dækker sikkerhedsinstruktioner, betjeningsprocedurer, opladningsprogrammer, tekniske specifikationer og garantioplysninger.
Preview CTEK MXS 7.0 Batterioplader Brugermanual
Omfattende brugermanual til CTEK MXS 7.0 batteriopladeren, der beskriver dens funktioner, opladningsprogrammer, tekniske specifikationer og sikkerhedsretningslinjer for alle typer 12V blybatterier.
Preview CTEK NXT 15 Brugermanual - 12V 15A Batterioplader
Brugermanual til CTEK NXT 15, en 12V 15A batterioplader. Indeholder detaljerede instruktioner om sikkerhed, betjening, opladningstilstande for bly-syre- og litiumbatterier, tekniske specifikationer og garantioplysninger.
Preview CTEK US 0.8 (1064) Batterioplader Brugermanual
Omfattende brugermanual til CTEK US 0.8 (1064) 12V batterioplader, der dækker sikkerhedsinstruktioner, betjening, opladningsprogrammer, tekniske specifikationer og vedligeholdelse.
Preview CTEK XS 0.8: Kompakt 12V blybatterioplader
Lær om CTEK XS 0.8, en kompakt, fuldautomatisk 6-trins 12V blybatterioplader, der er ideel til motorcykler, quads og biler. Funktionerne omfatter afsulfatering, vedligeholdelsesopladning, IP65-klassificering og 5 års garanti.
Preview CTEK MXS 5.0 Batterioplader Brugermanual - Funktioner, specifikationer og sikkerhed
Omfattende brugermanual til CTEK MXS 5.0 professionel switch-mode batterioplader. Indeholder opladningsprogrammer, tekniske specifikationer, tilslutningsinstruktioner, sikkerhedsretningslinjer og garantioplysninger.