Peplink Balance 20 Dual-WAN Router User Manual

1. Introduktion

The Peplink Balance 20 is a Dual-WAN router designed for users requiring reliable and high-performance internet connectivity. This device allows for the aggregation of multiple internet connections, enhancing bandwidth and ensuring network uptime through intelligent load balancing and automatic failover capabilities.

Nøglefunktioner omfatter:

• Dual-WAN (2 WAN) ports for internet connectivity, plus 1 USB WAN port for 4G LTE / 3G modems.
• Optional activation of a 3rd GE WAN port with a license key.
• 4-port GE LAN switch for local network devices.
• 150Mbps router throughput.
• Advanced load balancing algorithms to distribute network traffic.
• Automatic health checks and failover for continuous internet access.

2. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• Peplink Balance 20 Router
• 12V2A strømforsyning

Image: The Peplink Balance 20 router shown alongside its included 12V2A power supply.

3. Produktet er slutview

3.1 Frontpanel

Billede: Forside view of the Peplink Balance 20 router, displaying the USB WAN port, four LAN ports (1-4), two WAN ports (1-2), and LED indicators for Status and Power.

• USB WAN-port: Connect a 4G LTE / 3G USB modem for additional internet connectivity.
• LAN-porte (1-4): Four Gigabit Ethernet ports for connecting local network devices such as computers, switches, or wireless access points.
• WAN-porte (1-2): Two Gigabit Ethernet ports for connecting primary internet sources (e.g., DSL, Cable modems).
• Status-LED: Indicates the operational status of the device.
• Power LED: Angiver enhedens strømstatus.

3.2 Bagpanel

Billede: Bagside view of the Peplink Balance 20 router, showing the 12V DC power input and a cable holder.

• 12V DC strømindgang: Connect the included 12V2A power supply.
• Cable Holder: Provides strain relief for the power cable.

4. Opsætning

Follow these steps to set up your Peplink Balance 20 router:

1. Connect Internet Sources: Connect your primary internet modems (e.g., cable modem, DSL modem) to the WAN 1 and WAN 2 ports on the router using Ethernet cables. If using a 4G LTE/3G USB modem, connect it to the USB WAN port.
2. Connect Local Devices: Connect your computers, switches, or wireless access points to the LAN 1-4 ports using Ethernet cables.
3. Anvend strøm: Connect the 12V2A power supply to the 12V DC input on the rear panel of the router, then plug the power supply into an electrical outlet. The Power LED on the front panel should illuminate.
4. Adgang Web Administration: Åbn a web browser on a device connected to the router's LAN. Enter the default IP address (typically 192.168.1.1) into the address bar. Follow the on-screen wizard for initial configuration, including setting up WAN connections and administrative passwords.

Image: A laptop displaying the Peplink Web Admin interface, illustrating the ease of remote configuration.

5. Betjeningsvejledning

5.1 Dual-WAN Functionality

The Peplink Balance 20 leverages its Dual-WAN capabilities to provide enhanced internet performance and reliability.

Image: The Peplink Balance 20 router highlighted with 'Dual WAN' text, emphasizing its ability to utilize multiple internet connections.

Lastbalancering

The router employs seven advanced load balancing algorithms to distribute network traffic across your connected WAN links. This optimizes bandwidth utilization, allowing for faster web page loading and improved overall network speed. You can configure rules to prioritize high-volume traffic to faster internet links.

Image: A diagram showing the Peplink Balance 20 router distributing network traffic from multiple devices across two WAN connections for optimized performance.

Automatic Failover

For maximum reliability, the Peplink Balance 20 continuously monitors the status of your internet links. In the event of a link failure, the router automatically reroutes all traffic to the remaining active connections, ensuring uninterrupted internet access. This feature is crucial for maintaining business continuity or critical home network operations.

Image: A diagram demonstrating the automatic link failover feature, where if one WAN connection fails, the router seamlessly switches all traffic to the other active WAN connection.

5.2 Optional 3rd WAN Port

A third Gigabit Ethernet WAN port can be activated on the Peplink Balance 20 as an optional upgrade. This requires a license key available directly from Peplink, further expanding your connectivity options.

6. Vedligeholdelse

To ensure optimal performance and longevity of your Peplink Balance 20 router, consider the following maintenance guidelines:

• Placering: Position the router in a well-ventilated area to prevent overheating. Avoid enclosed spaces or direct sunlight.
• Rensning: Periodically clean the device and its vents to prevent dust accumulation, which can impede airflow and lead to overheating. Use a soft, dry cloth.
• Firmwareopdateringer: Regularly check the Peplink webwebsted for firmwareopdateringer. Ved at holde firmwaren opdateret sikrer du adgang til de nyeste funktioner, sikkerhedsrettelser og forbedringer af ydeevnen.
• Power Cycle: If you experience network issues, a simple power cycle (unplugging the power adapter for 10 seconds and then plugging it back in) can often resolve minor glitches.

7. Fejlfinding

If you encounter issues with your Peplink Balance 20 router, refer to the following common troubleshooting steps:

• Ingen internetadgang:
  • Verify that your internet modems are powered on and functioning correctly.
  • Check the Ethernet cables connecting your modems to the router's WAN ports.
  • Log ind på web administration interface to check the status of each WAN connection.
• Langsom ydeevne:
  • Ensure that load balancing is configured appropriately for your internet links.
  • Check for any high-bandwidth applications or devices on your network.
• Router Freezing/Unresponsive:
  • If the router becomes unresponsive and requires frequent power cycling, ensure the device is in a well-ventilated area and not overheating.
  • Consider performing a firmware update.
  • If the issue persists, contact Peplink support for further assistance.
• Kan ikke få adgang Web Admin:
  • Ensure your device is connected to one of the router's LAN ports.
  • Verify that your device's IP settings are configured to obtain an IP address automatically (DHCP).
  • Prøv en anden web browser.

8. Specifikationer

9. Support

For technical support, warranty information, or further assistance, please visit the official Peplink website or contact their customer service. Refer to the documentation provided with your purchase for specific warranty terms and contact details.