1. Introduktion og produktoversigtview
The Tamiya Polycarbonate PS-60 Bright Mica Red Spray Paint is specifically formulated for decorating transparent polycarbonate bodies commonly used in R/C car modeling. Each can contains 100ml of paint, which is typically sufficient for painting one complete model body. This paint is designed for application to the interior surface of the body shell, a method distinct from painting traditional plastic models. Once cured, the paint is resistant to oil and fuels, making it suitable for gas-powered R/C bodies.
Vigtig bemærkning: This paint is exclusively for polycarbonate surfaces. Do not use this product on standard plastic models.
Image 1.1: A 100ml aerosol can of Tamiya Polycarbonate PS-60 Bright Mica Red spray paint, designed for RC car bodies.
2. Sikkerhedsoplysninger og forholdsregler
This product is an aerosol spray paint and requires careful handling. Adhere to all safety warnings printed on the product label and packaging.
- FARE: Extremely flammable. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
- Contains Acetone and harmful solvents. May be fatal if concentrated and inhaled. Use only in a well-ventilated area. Avoid breathing vapor or spray mist.
- Contents under pressure. Do not puncture or incinerate can. Do not expose to temperatures exceeding 120°F (49°C).
- Opbevares utilgængeligt for børn.
- Wear appropriate personal protective equipment, including gloves and eye protection, during application.
- Ensure adequate ventilation to prevent vapor accumulation.
- Bortskaf indholdet/beholderen i overensstemmelse med lokale regler.
3. Opsætning og klargøring
Proper preparation is crucial for achieving optimal results and paint adhesion.
- Clean the Polycarbonate Body: Thoroughly wash the inside of the polycarbonate body shell with mild soap (such as dish detergent) and lukewarm water. This removes any mold release agents, oils, or dust. Rinse completely and allow the body to air dry fully. Ensure no water spots or residue remain.
- Maskering: Mask off any areas you do not wish to paint, such as windows, headlights, or specific design elements, using high-quality masking tape designed for model painting. Ensure all edges are firmly pressed down to prevent paint bleed.
- Ventilation: Work in a well-ventilated area, preferably outdoors or in a spray booth with proper exhaust.
- Shake the Can: Shake the spray can vigorously for at least one minute after the mixing ball begins to rattle. Continue shaking periodically during application to ensure consistent color and finish.
- Testspray: Before applying to the model, perform a test spray on a scrap piece of polycarbonate or similar material to check the color and spray pattern.
4. Operating Instructions (Paint Application)
Follow these steps for effective application of Tamiya PS-60 spray paint.
- Afstand: Hold the spray can approximately 30 cm (12 inches) away from the interior surface of the polycarbonate body.
- Thin Coats: Apply paint in thin, even coats. Do not attempt to achieve full coverage in a single pass. Multiple thin coats will provide a smoother finish and prevent runs or drips.
- Drying Time Between Coats: Allow each thin coat to dry for approximately 5-10 minutes (or until touch-dry) before applying the next. This prevents solvent trapping and ensures proper adhesion.
- Lagdeling: Continue applying thin coats until the desired color depth and opacity are achieved. For metallic or mica colors like PS-60 Bright Mica Red, multiple coats are often necessary to bring out the full effect.
- Backing Color (Optional but Recommended): For brighter, more vibrant results and to protect the paint, it is often recommended to apply a backing color (e.g., Tamiya PS-1 White or PS-5 Black) after the main color has fully dried. This helps the color stand out and prevents light from shining through.
- Final Cure: After the final coat (and backing color, if used) has been applied, allow the paint to cure completely. The recommended dry time is approximately 3 hours, but full hardness may take longer. Avoid handling the painted body excessively during this period.
5. Vedligeholdelse og opbevaring
- Rengøring af dysen: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This clears the nozzle and prevents clogging. Wipe the nozzle clean with a cloth.
- Opbevaring: Store the spray can in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and open flames. Ensure the cap is securely placed on the can.
- Temperatur: Avoid storing in temperatures exceeding 120°F (49°C) or below freezing.
- Bortskaffelse: Dispose of empty cans or unused paint according to local hazardous waste regulations. Do not puncture or incinerate.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Paint runs or drips | Too much paint applied in one coat; can held too close to surface. | Apply thinner coats. Increase distance from surface (approx. 30 cm). Allow more drying time between coats. |
| Uneven finish / "Orange Peel" | Can held too far away; insufficient shaking; cold paint/environment. | Ensure can is shaken thoroughly. Maintain proper distance. Work in a warm environment. |
| Poor adhesion / Peeling | Surface not properly cleaned; oil/grease residue; incompatible surface. | Thoroughly clean and dry the polycarbonate body before painting. Ensure it is only used on polycarbonate. |
| Tilstoppet dyse | Paint dried in nozzle after use. | Invert can and spray until clear propellant comes out after each use. If clogged, try soaking nozzle in paint thinner (ensure compatibility). |
7. Produktspecifikationer
| Mærke | TAMIYA |
| Modelnavn | TAM86060 (Tamiya PS-60) |
| Farve | Bright Mica Red |
| Malingstype | Polycarbonate Spray Paint (Aerosol) |
| Finish Type | Matte (with Mica effect) |
| Bind | 100 milliliter (3.38 fl. oz.) |
| Overfladeanbefaling | Polycarbonate Plastic (RC Car Bodies) |
| Anvendelsesområde | Interior of transparent body shells |
| Dry Time (Touch) | Approx. 5-10 minutes between coats |
| Dry Time (Cure) | Approx. 3 hours for initial cure |
| Særlige funktioner | Oil and fuel resistant (for gas-powered R/C bodies), Water Resistant |
| Produktdimensioner | 2.05 x 2.05 x 4.21 tommer |
| Varens vægt | 4.8 ounce |
8. Garantioplysninger
Tamiya products are manufactured to high-quality standards. Specific warranty details for this spray paint are not provided in the product information. For any concerns regarding product defects or performance, please retain your proof of purchase and contact Tamiya customer support or your retailer directly.
9. Kundesupport
For further assistance, technical questions, or product inquiries, please refer to the official Tamiya website or contact their customer service department. Contact information can typically be found on the product packaging or the official Tamiya webwebsted.
Online ressourcer: Visit Tamiya's Official Webwebsted
