Produkt overview
The Orbit 400-Series Professional Pop-Up Sprinkler Spray Head (Model 54184L) is designed for efficient and reliable lawn watering. Featuring a 2-inch pop-up height and a plastic nozzle with a side strip pattern, this sprinkler is ideal for smaller lawn areas, providing a radius of 8 to 12 feet. Constructed from UV-resistant plastic, it ensures durability and years of dependable use in outdoor cold water applications.

Image: Orbit 400-Series Professional Pop-Up Sprinkler Spray Head with its pop-up mechanism extended, showing the green nozzle cap.
Installation og opsætning
Proper installation ensures optimal performance of your sprinkler head. Follow these steps for a successful setup:
- Forbered området: Dig a trench for the sprinkler piping, ensuring it is deep enough to bury the pipe and sprinkler head below ground level when retracted.
- Tilslut til hovedlinjen: Attach the sprinkler head to the irrigation piping using appropriate fittings. Ensure all connections are secure and watertight.
- Placering af sprinkleren: Place the sprinkler head in the desired location. The top of the sprinkler head should be flush with the ground surface when installed.
- Tilbagefyldning: Carefully backfill the trench with soil, ensuring the sprinkler head remains upright and level. Avoid getting dirt inside the sprinkler mechanism.
- Test system: Turn on the water supply to the irrigation system and check for leaks around the sprinkler head. Observe the spray pattern to ensure proper coverage.
Operation
The Orbit 400-Series Pop-Up Sprinkler operates automatically as part of your irrigation system. It is designed for use with cold water only.
- Automatisk pop-up: When water pressure is applied to the irrigation line, the sprinkler head will automatically pop up to its full 2-inch height.
- Spray mønster: The integrated plastic nozzle provides a fixed side strip spray pattern, designed for efficient coverage of rectangular or narrow lawn areas.
- Tilbagetrækning: Once the water supply is turned off, the sprinkler head will retract back into the ground, remaining out of sight and protected from lawn equipment.
Opretholdelse
Regular maintenance helps prolong the life and efficiency of your sprinkler heads.
- Rens dyse: Periodically inspect the nozzle for debris (e.g., dirt, grass clippings) that may obstruct the spray. Gently clean the nozzle opening if necessary.
- Tjek for lækager: During operation, observe the area around the sprinkler head for any signs of leaks. Address leaks promptly to conserve water and prevent damage.
- Vinterisering: In colder climates, ensure your irrigation system, including sprinkler heads, is properly winterized before freezing temperatures arrive to prevent damage from expanding ice.
- Undersøg for skader: Regularly check the sprinkler head for any physical damage to the casing or pop-up mechanism. Replace damaged units as needed.
Fejlfinding
Her er nogle almindelige problemer og deres potentielle løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Sprinkler not popping up fully | Low water pressure, debris in mechanism, damaged spring. | Check water pressure, clean debris from around and inside the head, replace if spring is damaged. |
| Ujævnt sprøjtemønster | Clogged nozzle, damaged nozzle. | Clean the nozzle opening, replace the nozzle if damaged. |
| Water leaking from base of head | Loose connection, cracked casing, worn seal. | Tighten connections, inspect for cracks (replace if cracked), check and replace internal seals if accessible. |
| Sprinkler not retracting | Debris preventing retraction, damaged spring. | Clear debris from around the pop-up stem, replace the sprinkler head if the spring is broken. |
Tekniske specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Orbit |
| Modelnummer | 54184L |
| Farve | Sort |
| Materiale | Plast |
| Stil | Pop-up |
| Pop-Up Height | 2 tommer |
| Spray Radius | 8 til 12 fod |
| Dysetype | Side Strip Plastic Nozzle |
| Produktmål (L x B x H) | 2.25 x 2.25 x 4.25 tommer |
| Varens vægt | 0.8 ounce |
| Fabrikant | Orbit Underground/Sunmate |
| UPC | 046878541849 |
Garanti og support
For specific warranty information and customer support, please refer to the official Orbit webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
Online ressourcer: Visit the official Orbit webwebsted for produktmanualer, ofte stillede spørgsmål og yderligere supportressourcer.
Kundeservice: Contact Orbit customer service for technical assistance or warranty inquiries. Contact details can typically be found on the product packaging or the official webwebsted.





