Indledning
The CanDo Magneciser Pedal Exerciser is a versatile and compact device designed for both upper and lower body workouts. It features ultra-quiet magnetic resistance, making it suitable for use in various environments without disturbance. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Magneciser.
Nøglefunktioner omfatter:
- Smooth Quiet Operation: High-quality components ensure a quiet exercise experience.
- Compact and Convenient Size: Portable design for use at home, work, or school.
- Fat Burning and Strength Building: Supports both cardiovascular exercise and muscle toning.
- Alsidig brug: Can be used for exercising arms or legs.
- Digital skærm: Monitors speed, time exercised, calories consumed, and distance.
Sikkerhedsoplysninger
WARNING: Before beginning any exercise program, consult with your physician. Improper use of this equipment can result in injury.
- Always place the exerciser on a stable, level surface during use.
- Sørg for, at alle dele er forsvarligt samlet og fastspændt før hver brug.
- Hold hænder og fødder væk fra bevægelige dele under drift.
- Do not stand on the exerciser. It is designed for seated use only.
- Keep children and pets away from the exerciser during use.
- Hvis du oplever smerter, svimmelhed eller åndenød, skal du straks stoppe med at træne og kontakte en læge.
Reservedelsliste
Sørg for, at alle følgende komponenter er til stede inden montering:
- Main Exerciser Unit
- Forreste støtterør
- Låseknap
- Left Pedal (marked 'L')
- Right Pedal (marked 'R')
- Digital skærm
- 2 x AA batterier (medfølger)
- Assembly Tool (small wrench)
Opsætning og montering
Follow these steps to assemble your CanDo Magneciser Pedal Exerciser:
Attach the Front Support Tube
Insert the front support tube into the designated slot at the front base of the main exerciser unit. Slide it in until it reaches your desired position for stability. The tube can be adjusted for wider or narrower support.
Image: The main exerciser unit with the front support tube being inserted into its base.
Secure the Front Support Tube
Once the front support tube is in place, attach the locking knob into the threaded hole on the main unit, just above the inserted tube. Turn the knob clockwise to tighten it securely, ensuring the support tube is firmly held.
Billede: Et nærbillede view of the resistance knob, which is similar in appearance to the locking knob for the support tube.
Sæt pedalerne på
Identify the Left (L) and Right (R) pedals. The pedals are labeled at the end of their screws. The left pedal must be tightened counter-clockwise, while the right pedal tightens clockwise. Use the provided assembly tool to firmly secure each pedal to its corresponding crank arm on the main unit.
Image: A close-up of one of the pedals, showing the adjustable strap and the screw end where the 'L' or 'R' label is located.
Install Batteries in the Digital Monitor
Open the battery compartment on the back of the digital monitor. Insert the two included AA batteries, ensuring correct polarity (+/-). Close the battery compartment securely.
Billede: Et nærbillede view of the digital display, which houses the battery compartment on its underside.
Connect and Mount the Digital Monitor
Locate the monitor wire extending from the main unit. Plug this wire into the corresponding port on the back of the digital monitor. Once connected, slide the monitor completely onto the monitor tab located at the top of the main exerciser unit until it clicks securely into place.
Videovejledning til montering:
Video: A step-by-step guide on assembling the CanDo Magneciser Pedal Exerciser.
Betjeningsvejledning
Justering af modstand
The Magneciser features a convenient tension control dial. Turn the resistance knob clockwise to increase the magnetic resistance, making pedaling more challenging. Turn it counter-clockwise to decrease resistance for an easier workout.
Billede: Et nærbillede view of the resistance knob, showing the '+' and '-' indicators for increasing og decreasing resistance.
Using for Lower Body Workout
Place the Magneciser on a flat, stable surface on the floor. Sit comfortably in a chair with your feet positioned in the pedal straps. Adjust the straps for a secure fit. Begin pedaling in either direction. The bi-directional pedal rotation allows for varied muscle engagement.
Image: A woman seated, using the Magneciser for a leg exercise, demonstrating proper positioning.
Using for Upper Body Workout
Place the Magneciser on a sturdy table or desk at a comfortable height. Sit in front of the unit and grasp the pedals with your hands. Adjust the hand straps for a secure grip. Begin rotating the pedals with your arms. This provides an effective upper body workout.
Image: A woman seated at a table, using the Magneciser for an arm exercise, demonstrating proper positioning.
Digitale displayfunktioner
The 5-function digital display automatically tracks your workout progress:
- HASTIGHED: Viser den aktuelle pedalhastighed.
- TID: Shows the duration of your exercise session.
- CAL: Estimates calories consumed during the workout.
- DIST: Indicates the simulated distance "traveled".
- SCAN: Cycles through all functions automatically.
Press the red button on the monitor to cycle through modes or reset values. The monitor will automatically turn on when pedaling begins and turn off after a period of inactivity to conserve battery life.
Billede: Et nærbillede view of the digital display, showing the various metrics and the red control button.
Vedligeholdelse og pleje
- Rensning: Tør træningsapparatet af med adamp klud efter hver brug. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Store the unit in a cool, dry place away from direct sunlight. The front support tube can be retracted for more compact storage.
- Udskiftning af batteri: Replace the AA batteries in the digital monitor when the display becomes dim or unresponsive.
- Smøring: The magnetic resistance system is designed for smooth, maintenance-free operation and does not require lubrication.
- Inspektion: Periodically check all nuts, bolts, and moving parts to ensure they are secure and functioning correctly.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Digitalt display virker ikke. | Dead batteries; Loose battery connection; Loose monitor wire connection. | Replace AA batteries; Ensure batteries are correctly inserted; Check that the monitor wire is securely plugged into the monitor. |
| Pedals are loose or wobbly. | Pedals not tightened sufficiently; Incorrect pedal attachment (left/right). | Retighten pedals using the assembly tool (remember left pedal is counter-clockwise); Ensure 'L' pedal is on the left crank arm and 'R' on the right. |
| Exerciser slides during use. | Used on a smooth surface without proper grip; Front support tube not extended or tightened. | Place the exerciser on a non-slip mat or carpet; Ensure the front support tube is fully extended and the locking knob is tightened. |
| Resistance knob has no effect. | Problem med den interne mekanisme. | Kontakt kundesupport for at få hjælp. |
Specifikationer
- Modelnummer: 01-8030
- Mærke: CanDo
- Fabrikant: Fabrikationsvirksomheder
- Produktdimensioner: Approximately 10"D x 18"W x 16"H (adjustable width)
- Varens vægt: 10 pund
- Farve: Grå
- Materiale: Plast, Metal
- Modstandstype: Magnetic, Bi-directional
- Displayfunktioner: Speed, Time, Calories, Distance, Scan
- Power Source (Monitor): 2 x AA batterier
Garanti og support
For warranty information and customer support, please contact Fabrication Enterprises directly. Keep your purchase receipt as proof of purchase.
Fabrikantens kontaktoplysninger: 1-800-431-2830
You may also refer to the official user manual PDF for additional details: CanDo Magneciser User Manual (PDF)
