1. Introduktion
Thank you for choosing the RICOO R17 Universal Tilting TV Wall Mount. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new TV wall mount. Please read this manual thoroughly before installation and keep it for future reference.
The RICOO R17 is designed for flat and curved LED LCD TVs ranging from 37 to 75 inches, with a maximum load capacity of 100 kg. It supports VESA mounting patterns from 300x200mm to 600x400mm and offers a continuous tilt of +/-15 degrees, with a slim wall distance of only 65mm.
2. Sikkerhedsoplysninger
ADVARSEL: Improper installation or use of this product can result in serious injury or damage. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.
- Overskrid ikke den maksimale belastningskapacitet på 100 kg (220 lbs).
- Ensure the wall structure can safely support the combined weight of the mount and the TV.
- Always use appropriate personal protective equipment during installation.
- Verify all components are present and undamaged before installation. Do not use damaged parts.
- Tighten all screws firmly but do not overtighten. Overtightening can damage the screws and components.
- Dette produkt er kun beregnet til indendørs brug.
- Hold børn og kæledyr væk under installationen.
3. Pakkens indhold
Please check the package contents against the list below. If any parts are missing or damaged, contact RICOO customer service.
- Pre-assembled TV wall mount bracket
- Wall plugs (for concrete walls only)
- Various screws for TV attachment (M4, M6, M8)
- Wall mounting screws and accessories
- Spirit level (small)
- Brugsanvisning
Billede: Overview of the RICOO R17 TV Wall Mount and its main components.
4. Opsætning og installation
Before starting, ensure you have the necessary tools: drill, stud finder (if applicable), screwdriver, measuring tape, and a pencil. It is recommended to have two people for installation, especially for larger TVs.
4.1. VESA-kompatibilitetskontrol
This mount supports VESA patterns from 300x200mm to 600x400mm. Measure the horizontal and vertical distances between the mounting holes on the back of your TV. Ensure these measurements fall within the supported range.
Image: VESA compatibility chart showing supported hole patterns and examples of correct and incorrect mounting.
The horizontal distance between holes should be between 50mm and 700mm. The vertical distance between holes should be between 75mm and 400mm. The TV's weight must not exceed 100 kg.
4.2. Montering af beslag på tv'et
- Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at undgå ridser.
- Identify the correct screws (M4, M6, or M8) and spacers (if needed) that fit your TV's mounting holes.
- Attach the two vertical TV brackets to the back of your TV using the selected screws. Ensure the brackets are oriented correctly, with the hooks facing downwards and towards the wall plate.
4.3. Montering af vægpladen
- Determine the desired height for your TV. Mark the drilling points on the wall using the wall plate as a template.
- Use a stud finder to locate wall studs if mounting on wood stud walls. For concrete or brick walls, use the provided wall plugs.
- Bor pilothuller på de markerede steder.
- Attach the wall plate securely to the wall using the appropriate wall screws. Use the small spirit level to ensure the wall plate is perfectly horizontal.
Image: Visual guide demonstrating the effortless process of hanging the TV onto the mounted wall plate.
4.4. Hanging the TV
- Løft forsigtigt tv'et op med de medfølgende beslag med hjælp.
- Hægt TV-beslagene fast på vægpladens øverste kant.
- Sænk forsigtigt tv'et, indtil beslagene går helt i indgreb med vægpladen.
- Secure the TV to the wall plate using the safety screws located at the bottom of the TV brackets. This prevents accidental dislodgement.
Billede: Side view illustrating the slim 65mm distance between the TV and the wall once mounted.
5. Betjeningsvejledning
5.1. Justering af hældningsvinkel
The RICOO R17 allows for continuous tilting of your TV by +/-15 degrees. To adjust the tilt:
- Loosen the tilt adjustment knobs on the side of the TV brackets.
- Vip forsigtigt tv'et til den ønskede position viewvinkel.
- Spænd hældningsjusteringsknapperne for at fastgøre tv'et.
Image: Diagram showing the TV's ability to tilt smoothly up to 30 degrees for optimal viewing.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer levetiden og sikker drift af dit TV-vægbeslag.
- Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de forbliver stramme.
- Rengør holderen med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Do not hang additional items on the TV or the mount.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| TV'et er ikke i vater. | Vægpladen er ikke i vater under installationen. | Remove TV, re-level wall plate, and re-mount. |
| Beslaget føles løst. | Skruerne er ikke spændt tilstrækkeligt. | Check and tighten all wall and TV attachment screws. Do not overtighten. |
| Cannot tilt the TV. | Tilt adjustment knobs are too tight. | Loosen the tilt adjustment knobs before attempting to tilt. |
| TV'et passer ikke til beslaget. | Forkert VESA-mønster, eller tv'ets vægt overstiger kapaciteten. | Verify your TV's VESA pattern and weight against the mount's specifications. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | RICOO |
| Modelnummer | R17 |
| Monteringstype | Vægmontering |
| Bevægelsestype | Tilt |
| Max tilt vinkel | +/-15 degrees (up to 30 degrees total range) |
| Materiale | Legeret stål |
| Farve | Neutral sort |
| Kompatible tv-størrelser | 37 - 75 tommer (94 - 191 cm) |
| Max belastningskapacitet | 100 kg (220 lbs) |
| VESA-kompatibilitet | 300x200, 300x300, 400x200, 400x400, 600x400, 700x400 |
| Vægafstand | 65 mm |
| Wall Plate Dimensions (LxH) | 74 cm x 15 cm |
| Overall Mount Dimensions (LxH) | 75 cm x 45 cm |
| Oprindelsesland | Kina |
| ASIN | B003YFQWWS |
| International artikelkode | 04260201860124 |
Image: Technical drawing with detailed dimensions of the RICOO R17 wall mount in millimeters.
Image: Visual representation highlighting the maximum load capacity of 100 kg for the TV mount.
Image: Diagram illustrating the VESA compatibility, suitable for patterns up to 700x400mm.
9. Garanti og support
For warranty information or technical support, please contact RICOO customer service. Keep your purchase receipt as proof of purchase.
Kontaktoplysninger kan typisk findes på producentens webwebstedet eller på produktemballagen.
10. Produktvideoer
Der er ingen officielle produktvideoer fra sælgeren tilgængelige for denne model på nuværende tidspunkt.
