Wahl Groom Pro Total Body Grooming Kit (Model 79520-3101)

Indledning

Thank you for choosing the Wahl Groom Pro Total Body Grooming Kit. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your grooming kit. Please read all instructions carefully before use and retain for future reference.

Figure 1: Wahl Groom Pro Total Body Grooming Kit, including the main clipper and the smaller detail trimmer.

Opsætning

1. Udpakning og komponentkontrol

Fjern forsigtigt alle varer fra emballagen. Kontroller, at alle komponenter er til stede:

• Main Hair Clipper (corded)
• Detail Trimmer (battery-operated)
• Various Attachment Guide Combs
• Styling Combs
• Bladolie
• Rengøringsbørste
• Instruktionsmanual

2. Initial Blade Oiling

Before first use, and after every few haircuts, apply Wahl Clipper Oil to the blades. This ensures optimal performance and longevity.

1. Place three drops of oil across the top front blade.
2. Place one drop on each side of the blade.
3. Tænd klipperen i et par sekunder for at fordele olien.
4. Tør overskydende olie af med en blød klud.

Figure 2: Proper application of blade oil to the clipper.

BRUG IKKE HÅROLIE, Fedt eller nogen olie blandet med KEROSENE ELLER noget opløsningsmiddel.

3. Power Connection (Main Clipper)

The main clipper operates on corded electric power. Ensure the voltage in your home matches the specifications on the clipper. Plug the power cord into a suitable electrical outlet.

4. Battery Installation (Detail Trimmer)

The detail trimmer requires batteries (not included). Open the battery compartment, insert the correct type and number of batteries, ensuring correct polarity, and close the compartment securely.

Betjeningsvejledning

1. Selecting Attachment Combs

The kit includes various guide combs for different cutting lengths. Select the desired comb and securely attach it to the clipper or trimmer blade. Always start with a longer comb if you are unsure of the desired length.

Figure 3: Detail trimmer shown with custom guards for body grooming.

2. Using the Taper Lever (Main Clipper)

The taper lever on the main clipper allows for blending and customized cutting lengths without changing guide combs. Move the lever up for a closer cut and down for a longer cut. This is useful for fading and blending hair.

Figure 4: The taper lever adjusts for blending and customized cutting lengths.

3. Grooming Techniques

For best results, always cut against the direction of hair growth. Use smooth, overlapping strokes. The main clipper is ideal for overall hair cutting, while the detail trimmer is perfect for:

• Cleaning up necklines
• Trimning af bakkenbarter
• Detailing around the ears
• Total body grooming

Figur 5: Eksamples of using the main clipper and detail trimmer for grooming.

Opretholdelse

1. Cleaning Blades

After each use, brush loose hairs from the blades using the provided cleaning brush. For a more thorough cleaning, the blades can be removed (refer to specific instructions in the full manual for blade removal and reattachment) and rinsed under water, ensuring they are completely dry before reattaching and oiling.

2. Regelmæssig oliering

As mentioned in the setup section, regular oiling of the blades is crucial for maintaining cutting performance and preventing rust. Oil the blades every few haircuts.

3. Opbevaring

Store the grooming kit and all its accessories in a clean, dry place. Ensure the blades are oiled before storing for extended periods.

Fejlfinding

1. Clipper is Too Noisy / Excessive Clattering

If your clipper produces excessive noise or clattering, the power screw may need adjustment. This adjustment was made at the factory, but voltage fluctuations can sometimes require readjustment.

1. Turn your clipper to the "ON" position.
2. Using the end of the cleaning brush or a screwdriver, turn the power screw in a MOD URET direction until the clatter sound goes away.

For Maximum Power Setting:

1. Turn your clipper to the "ON" position.
2. Use the end of the cleaning brush or a screwdriver to turn the power screw in a MED URET direction until you hear a clattering noise.
3. Then, turn the power screw in the opposite direction (MOD URET) until the clattering stops.

Figure 6: Adjusting the power screw to optimize clipper performance and reduce noise.

2. Poor Cutting Performance

• Sørg for, at bladene er rene og fri for hårrester.
• Apply blade oil as instructed.
• Check if the attachment comb is securely fastened.
• For the detail trimmer, replace batteries if they are low.

3. Strømproblemer

• For the main clipper, ensure the power cord is fully plugged into a working outlet.
• For the detail trimmer, check battery orientation and replace with fresh batteries if needed.

Specifikationer

Figure 7: Approximate dimensions of the main clipper for scale.

Garanti og support

For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Wahl website. For technical support or replacement parts, please contact Wahl customer service through their official channels.