Geberit 150.156.21.1 Drejekontrol Badekar Afløbs- og Overløbsenhed Brugsanvisning

1. Introduktion

This manual provides essential information for the proper installation, operation, and maintenance of your Geberit 150.156.21.1 Turn Control cable-operated bath waste and overflow unit. Please read these instructions thoroughly before beginning installation or use to ensure safe and efficient functionality.

2. Produktet er slutview & Funktioner

The Geberit 150.156.21.1 is a polished chrome TurnControl cable-operated bath waste and overflow unit designed for concealed installation in bathtubs or tub/shower enclosures. It features a decorative trim kit and is engineered for intuitive and lightweight operation.

Nøglefunktioner:

• Compatible with most bathtubs ranging from 17 to 24 inches deep.
• Accommodates tub wall thicknesses between 1/16 inch and 5/16 inch.
• Requires a 2-inch diameter drain hole opening.
• Requires a 2-inch to 2 1/2-inch diameter overflow hole opening.
• Includes a molded plastic turn handle and plunger.
• Features a stainless steel strainer for durability.

Figur 1: Geberit 150.156.21.1 Turn Control Bath Waste & Overflow Unit. This image displays the complete unit, featuring a polished chrome turn handle at the top, connected by a cable to the drain assembly at the bottom. The main body consists of a vertical pipe structure designed for concealed installation within a bathtub.

3. Sikkerhedsoplysninger

Always observe local plumbing codes and regulations during installation. If you are unsure about any part of the installation process, consult a qualified plumber. Ensure all connections are secure and watertight to prevent leaks. Do not use harsh abrasive cleaners on the polished chrome finish.

4. Installation

The Geberit 150.156.21.1 unit is designed for concealed installation within a bathtub or tub/shower enclosure. Specific installation steps may vary based on your bathtub model and existing plumbing. Refer to the detailed diagrams and instructions provided in the packaging for precise guidance.

Generelle retningslinjer for installation:

1. Forberedelse: Ensure the bathtub is properly positioned and secured. Verify that the tub depth (17-24 inches) and wall thickness (1/16-5/16 inches) are compatible with the unit.
2. Afløbshul: Confirm the bathtub has a 2-inch diameter drain hole opening.
3. Overflow Hole: Confirm the bathtub has a 2-inch to 2 1/2-inch diameter overflow hole opening.
4. Forsamling: Assemble the drain and overflow components according to the manufacturer's diagrams, ensuring all gaskets and seals are correctly seated.
5. Forbindelse: Connect the unit to the bathtub's drain and overflow openings. Secure the polished chrome trim kit, including the turn handle and strainer, to the exterior of the tub.
6. Test: After installation, fill the bathtub with water and check for any leaks around the drain and overflow connections. Operate the TurnControl mechanism to ensure proper sealing and draining.

5. Betjening

The Geberit 150.156.21.1 features a manual rotary TurnControl actuation for opening and closing the bathtub drain. To operate:

• Sådan lukker du afløbet: Rotate the polished chrome turn handle in one direction (typically clockwise) until the drain stopper is fully closed, retaining water in the tub.
• Sådan åbner du afløbet: Rotate the turn handle in the opposite direction (typically counter-clockwise) until the drain stopper is fully open, allowing water to drain from the tub.

The cable-operated mechanism provides smooth and responsive control over the drain function.

6. Vedligeholdelse

Regular maintenance helps ensure the longevity and proper function of your Geberit bath waste and overflow unit.

• Rensning: Clean the polished chrome trim kit regularly with a soft cloth and mild, non-abrasive cleaner. Avoid using harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• Drain Clearing: Periodically remove the strainer and clear any hair or debris that may accumulate in the drain opening to prevent clogs.
• Inspektion: Occasionally inspect the visible components for any signs of wear or damage.

7. Fejlfinding

If you encounter issues with your Geberit bath waste and overflow unit, consider the following common troubleshooting steps:

• Langsom dræning: If water drains slowly, the strainer or drain pipe may be partially clogged. Remove the strainer and clear any obstructions. For deeper clogs, a plumbing snake or chemical drain cleaner (used according to product instructions) may be necessary.
• Drain Not Sealing: If the drain stopper does not seal properly, ensure no debris is preventing it from closing fully. Check the cable connection to the stopper to ensure it is not loose or damaged.
• Lækager: If leaks occur around the drain or overflow, check all connections for tightness. Gaskets may need to be re-seated or replaced if damaged.
• Stiff Operation: If the TurnControl handle feels stiff, ensure the cable is not kinked or obstructed. A small amount of silicone lubricant applied to moving parts (if accessible) might help, but avoid getting it into the drain path.

For persistent issues, contact a qualified plumber or Geberit customer support.

8. Specifikationer

9. Garanti og support

This Geberit product is covered by a Begrænset livstidsgaranti. For detailed warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Geberit webwebsted.

For technical support, replacement parts, or further assistance, please contact Geberit customer service through their official channels.