MTD Genuine Parts Front Bumper Kit

1. Introduktion

This manual provides instructions for the installation, operation, and maintenance of the MTD Genuine Parts Front Bumper Kit, Model OEM-190-679. This rugged all-steel bumper is designed to provide added safety and protection for the front of your lawn and garden tractor.

The bumper kit is compatible with most lawn and garden tractors from brands such as Troy-Bilt, MTD, MTD Gold, Huskee, Bolens, White Outdoor, Yard-Man, and Yard Machines.

2. Sikkerhedsoplysninger

Always observe basic safety precautions when installing or maintaining equipment. Failure to follow these instructions could result in personal injury or property damage.

• Læs og forstå alle instruktioner, før installationen påbegyndes.
• Brug passende personlige værnemidler, herunder sikkerhedsbriller og handsker.
• Ensure the tractor engine is off, the parking brake is engaged, and the ignition key is removed before performing any work.
• Hold børn og omkringstående væk fra arbejdsområdet.
• Brug passende værktøj til opgaven.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes.

• Front Bumper Assembly (1)
• Mounting Hardware Kit (various bolts, nuts, pins)

This image displays the main bumper bar, which is black and curved, along with various bolts, nuts, and quick-release pins that constitute the mounting hardware.

This image provides another perspective of the black, curved bumper bar and the complete set of mounting hardware, including bolts, nuts, and pins, laid out for inspection.

4. Opsætning og installation

The front bumper kit is designed for easy installation. Installation methods may vary slightly depending on your specific tractor model. The kit supports both pin-on and bolt-on attachment options.

4.1. Trin før installation

1. Parker traktoren på et plant underlag.
2. Turn off the engine, engage the parking brake, and remove the ignition key.
3. Gather all necessary tools (e.g., wrenches, sockets, drill if needed).

4.2. Attaching the Bumper

1. Identify the mounting points on the front frame of your lawn or garden tractor. These are typically pre-drilled holes or existing attachment points.
2. Align the bumper assembly with the tractor's frame mounting points. The bumper's mounting brackets should align with the holes on the tractor frame.
3. Insert the appropriate bolts or pins from the mounting hardware kit through the aligned holes.
4. Secure the bolts with nuts, tightening them firmly but do not overtighten. If using quick-release pins, ensure they are fully engaged.
5. Verify that the bumper is securely attached and does not wobble. If the bumper feels loose, re-check all fasteners. Some tractor models may require drilling additional holes for a more secure, non-quick-disconnect installation.

Note: While the kit is designed for universal fit, minor adjustments or drilling of additional holes may be necessary for optimal fitment on some older or specific tractor models.

5. Betjening

Once installed, the front bumper operates passively by providing a protective barrier at the front of your lawn and garden tractor. It is designed to absorb minor impacts and protect the tractor's grille, hood, and other front components from damage during operation, especially when navigating around obstacles or in tight spaces.

No specific operational steps are required for the bumper itself after installation. Always operate your tractor according to its manufacturer's instructions.

6. Vedligeholdelse

Regular maintenance ensures the longevity and effectiveness of your front bumper kit.

• Rensning: Periodically clean the bumper with a damp cloth to remove dirt, grass clippings, and debris. Avoid abrasive cleaners that could damage the finish.
• Fastgørelseskontrol: Before each use of the tractor, inspect all mounting hardware (bolts, nuts, pins) to ensure they are tight and secure. Tighten any loose fasteners.
• Skadeinspektion: Regularly check the bumper for any signs of damage, such as bends, cracks, or rust. If significant damage is present, consider replacing the bumper to maintain optimal protection.
• Rustforebyggelse: If the bumper's paint is chipped or scratched, touch up the affected areas with rust-inhibiting paint to prevent corrosion, especially if the bumper is made of alloy steel.

7. Fejlfinding

Problem: Bumper does not fit or align correctly.

Løsning: Verify that your tractor model is listed as compatible. While designed for universal fit, some models may require minor fabrication or drilling of new holes for proper alignment. Consult your tractor's manual for specific frame details.

Problem: Bumper feels loose or wobbly after installation.

Løsning: Ensure all mounting bolts and nuts are securely tightened. If using quick-release pins, confirm they are fully engaged. For a more rigid installation, consider replacing quick-release pins with additional bolts and nuts, potentially requiring drilling if your tractor frame does not have corresponding holes.

Problem: Bumper shows signs of rust.

Løsning: Clean the rusted area thoroughly. Sand down any surface rust and apply a rust-inhibiting primer followed by a suitable exterior paint to match the bumper's finish. Regular inspection and touch-ups can prevent widespread corrosion.

8. Specifikationer

9. Garanti og support

For specific warranty information regarding the MTD Genuine Parts Front Bumper Kit, please refer to the documentation provided with your purchase or contact the retailer. Warranty terms typically cover manufacturing defects.

For product support, technical assistance, or to inquire about replacement parts, please visit the official Arnold brand store or contact their customer service department.

Arnold Brand Store: Visit Arnold Store on Amazon