ZeroWater 23-kops klar-hældbar 5-Stage Vandfilterdispenser

Produkt overview

The ZeroWater 23-Cup Ready-Pour 5-Stage Water Filtration Dispenser provides pure-tasting water by removing virtually all dissolved solids. Its compact design is ideal for home or small office use, offering convenient one-hand dispensing.

Image: ZeroWater 23-Cup Dispenser with TDS meter.

Nøglefunktioner:

• 5-Stage Avanceret filtrering: Removes virtually all dissolved solids (TDS) for the purest tasting water.
• IAPMO Certified: Certified to reduce PFOA/PFOS, lead, chromium, and mercury.
• Integreret TDS-måler: Allows you to check dissolved solid levels and know when to change your filter.
• BPA-fri konstruktion: All components are made from BPA-Free plastic.
• Stor kapacitet: 23-cup (5.4 liter) capacity with a convenient push-and-pour spout.

Hvad er der i æsken

• Zerowater ZD-018 23-Cup Water Dispenser and Filtration System
• Electronic TDS Water Testing Meter
• 1 - Zerowater Filter Cartridge

Opsætning & montering

1. Udpakning og vask: Carefully unpack all components. Wash the dispenser, lid, and reservoir with mild soap and warm water. Rinse thoroughly.
2. Installer filter: Twist the 5-stage ion exchange filter into the bottom of the reservoir until it is securely sealed.
3. Stedreservoir: Insert the reservoir with the installed filter into the top of the dispenser.
4. Fyld med vand: Fill the reservoir with cold tap water. The water will begin to filter through the 5-stage system into the main dispenser chamber.
5. Sæt låg på: Place the lid securely on top of the dispenser.

Image: Easy installation process showing the filter being screwed into the reservoir.

Betjeningsvejledning

1. Dispensering af vand: Position your glass or bottle under the push-and-pour spout located at the front of the dispenser. Press the blue button to release filtered water.
2. Checking TDS Levels: Use the included TDS meter to regularly check the Total Dissolved Solids (TDS) level of your filtered water. Simply remove the meter from its holder, turn it on, and dip the prongs into the filtered water.

Image: A hand dispensing water from the ZeroWater dispenser into a glass.

Maintenance & Filter Replacement

The ZeroWater filter's lifespan depends on your tap water's initial TDS level. The higher the initial TDS, the shorter the filter life.

• When to Change Filter: Replace the filter when the TDS meter reads 006 or higher. This indicates the filter is no longer effectively removing dissolved solids.
• Rensning: Regularly clean the dispenser and reservoir with mild soap and water. Avoid abrasive cleaners.

Image: TDS meter displaying a reading of 006, indicating filter replacement is needed.

Filtreringsteknologi

The ZeroWater 5-stage filtration system is designed to remove virtually all dissolved solids from your water, providing a pure and clean taste. This advanced process includes:

1. Stage 1: Coarse Filter Screen - Removes fine particles and sediment.
2. Stage 2: Foam Distributor - Distributes water evenly for optimal contact with filtration media.
3. Stage 3: Multi-Layer Activated Carbon & Oxidation Reduction Alloy - Removes organic contaminants, chlorine, and prevents bacteria growth.
4. Stage 4: Dual Ion-Exchange Resin - Absorbs inorganic compounds, metals, and nonmetals.
5. Stage 5: Ultra-Fine Screen & Non-Woven Membrane - Removes remaining ultra-fine particles.

Image: Detailed diagram illustrating the five stages of ZeroWater filtration.

Image: Certification details for reducing lead, chromium, and PFOA/PFOS.

Specifikationer

Fejlfinding

• Langsom filtrering: If water filters slowly, it may indicate the filter is nearing the end of its life due to accumulated impurities. Check the TDS reading and replace the filter if it's 006 or higher.
• Usædvanlig smag: A sudden change in water taste (e.g., bitter, fishy) is a strong indicator that the filter needs to be replaced immediately. This means the filter media is saturated.
• TDS Reading Not Zero: If your filtered water's TDS reading is not 000-001, ensure the filter is properly screwed into the reservoir and that the reservoir is correctly seated in the dispenser. If the issue persists and the reading is 006 or higher, replace the filter.

Garanti & Support

For detailed warranty information and further support, please refer to the official ZeroWater User Manual.

• Brugermanual (PDF): Download brugermanual
• Brugervejledning (PDF): Download brugervejledning
• Visit ZeroWater Store: ZeroWater Official Store