Intermatic AG6503C3

Brugermanual til Intermatic AG6503C3 trefaset type-1 overspændingsbeskyttelse

Model: AG6503C3

1. Produktet er slutview

The Intermatic AG6503C3 is a Three Phase Type-1 Surge Protection Device designed to safeguard electrical systems and connected equipment from damaging voltage surges. This device is suitable for outdoor installations and various applications, including service entrance panels, utility meter cabinets, irrigation equipment, pumps, lighting fixtures, traffic signaling devices, farm equipment, HVAC controls, and motors.

Its robust design features parallel Metal Oxide Varistors (MOVs) from each line to a grounded neutral, enhancing product capability. The molded polycarbonate housing ensures durability, being both weatherproof and UV resistant. The AG6503C3 is specifically engineered for 347/600 Volt three-phase applications and complies with ANSI/UL1449 3rd Edition requirements.

Intermatic AG6503C3 Three Phase Type-1 Surge Protection Device, black, showing the green indicator light.

Figure 1: Intermatic AG6503C3 Surge Protection Device. The device features a black polycarbonate housing and a visible green LED indicator light, signifying operational status.

2. Sikkerhedsoplysninger

WARNING: Risk of electric shock. Installation and servicing must be performed by qualified personnel only. Disconnect power before installation or servicing.

  • Følg altid lokale elektriske forskrifter og regler.
  • Ensure the power supply is completely disconnected before attempting any installation, wiring, or maintenance.
  • Brug passende personlige værnemidler (PPE), herunder sikkerhedsbriller og isolerede handsker.
  • Do not install this device in locations subject to excessive vibration, corrosive gases, or flammable materials.
  • Bekræft korrekt voltage and phase configuration before connecting the device.

3. Produktfunktioner

  • Udendørs installation: Designed for use in outdoor environments, including service entrance panels and utility meter cabinets.
  • Avanceret overspændingsbeskyttelse: Utilizes parallel MOVs from each line to grounded neutral for enhanced surge suppression capability.
  • Holdbar konstruktion: Features a molded polycarbonate housing that is weatherproof and UV resistant.
  • Nem ledningsføring: Equipped with 18-inch long, color-coded 10-gauge leads for straightforward installation.
  • Voltage Kompatibilitet: Specifically designed for 347/600 Volt three-phase applications.
  • Overholdelse: Meets ANSI/UL1449 3rd Edition requirements.
  • Statusindikator: A green LED light indicates that the product is energized and actively protecting connected devices.

4. Opsætning og installation

This device is intended for installation by a qualified electrician. Refer to the wiring diagram provided with the product packaging for specific connection details. The following steps provide a general overview:

  1. Strømafbrydelse: Ensure all power to the installation site is completely disconnected at the main breaker or disconnect switch. Verify with a voltage tester.
  2. Montering: Mount the AG6503C3 device securely in the desired outdoor location, such as a service entrance panel or utility meter cabinet. Ensure the mounting surface is stable and capable of supporting the device.
  3. Ledningsforbindelser: The device comes with 18-inch long, color-coded 10 AWG leads. Connect these leads according to the provided wiring diagram and local electrical codes for 347/600 Volt three-phase systems.
    • Connect the phase leads to the corresponding phase conductors.
    • Connect the neutral lead to the system neutral.
    • Connect the ground lead to the system ground.
  4. Sikre forbindelser: Ensure all wire connections are tight and secure to prevent loose connections and potential hazards.
  5. Strømgendannelse: Once all connections are verified and the installation is complete, restore power to the system.

Note: The AG6503C3 is designed for applications such as irrigation equipment, pumps, lighting fixtures, traffic signaling devices, farm equipment, and HVAC controls. Consult the product datasheet for detailed application guidelines.

5. Betjeningsvejledning

The Intermatic AG6503C3 operates automatically to protect against voltage surges. There are no user-adjustable settings.

  • Statusindikator: A green LED light on the device indicates its operational status. When the green LED is illuminated, the device is energized and actively providing surge protection.
  • Normal drift: Under normal operating conditions, the green LED will remain lit.
  • Overspændingshændelse: I tilfælde af et voltage surge, the device will divert excess voltage to ground, protecting connected equipment. This process is instantaneous and does not require user intervention.

6. Vedligeholdelse

The Intermatic AG6503C3 is designed for minimal maintenance. Regular visual inspections are recommended to ensure continued optimal performance.

  • Visuel inspektion: Periodically inspect the device for any signs of physical damage, such as cracks in the housing, discoloration, or loose connections.
  • LED-statuskontrol: Regularly check the green LED indicator light. If the LED is ikke illuminated, it indicates that the surge protection module may have been compromised or the device is no longer providing protection. Refer to the Troubleshooting section.
  • Rensning: If necessary, gently clean the exterior of the device with a damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler. Sørg for, at strømmen er afbrudt før rengøring.

7. Fejlfinding

If you encounter issues with your Intermatic AG6503C3, refer to the following troubleshooting guide:

ProblemMulig årsagLøsning
Grøn LED lyser ikke.
  • Ingen strøm til enheden.
  • Device has absorbed a significant surge and is no longer providing protection.
  • Intern fejl.
  • Verify power supply to the circuit where the device is installed. Check breakers.
  • If power is present and the LED is off, the device may need replacement.
  • Contact a qualified electrician for inspection and potential replacement.
Device appears physically damaged.Physical impact or extreme environmental conditions.Disconnect power immediately. The device must be replaced by a qualified electrician.

For issues not covered here, or if troubleshooting steps do not resolve the problem, contact Intermatic customer support or a qualified electrician.

8. Specifikationer

SpecifikationDetalje
ModelnummerAG6503C3
MærkeIntermatic
TypeType-1 Surge Protection Device
Voltage Bedømmelse347/600 Volts (Three Phase)
Frekvensvurdering50/60 Hertz
Tilslutningstype18-inch 10 AWG 4 Lead Wire
Materiale til husMolded Polycarbonate (Weatherproof and UV resistant)
Godkendelser/StandarderANSI/UL 1449, CSA
IndikatorGreen LED (Indicates protection status)
Dimensioner (ca.)5.9 x 4.7 x 3.6 tommer
Varens vægt (ca.)1.05 pund
Særlige funktionerOverspændingsbeskyttelse

9. Garanti og support

Garantibeskrivelse: Intermatic provides a warranty for this product, typically involving product replacement for defects. Specific terms and conditions may apply. Please refer to the official Intermatic warranty documentation included with your purchase or visit the manufacturer's webwebstedet for de seneste garantioplysninger.

Kundesupport: For technical assistance, warranty claims, or further information, please contact Intermatic customer support. Contact details can usually be found on the Intermatic official webwebsted eller produktemballage.

Fabrikant: Intermatic

Varenummer: AG6503C3

Relaterede dokumenter - AG6503C3

Preview Intermatic AG48013 overspændingsbeskyttelsesenhed: Installationsvejledning og garanti
Omfattende installationsvejledning og detaljer om et års begrænset garanti for Intermatic AG48013 Type 1 eller Type 2 overspændingsbeskyttelse. Indeholder sikkerhedsadvarsler, installationstrin og ledningsdiagrammer til elektriske systemer.
Preview Intermatic AG2403C3 Overspændingsbeskyttelsesenhed Installationsvejledning og garanti
Omfattende installationsvejledning og et års begrænset garanti for Intermatic AG2403C3 Type 1 eller Type 2 overspændingsbeskyttelse. Indeholder sikkerhedsadvarsler, installationsprocedurer, vedligeholdelsesretningslinjer, ledningsdiagrammer og garantivilkår.
Preview Intermatic AG3000 installationsvejledning og tre års begrænset garanti
Omfattende installationsvejledning og tre års begrænset garantioplysninger for Intermatic AG3000 Type 1 eller Type 2 overspændingsbeskyttelse, der dækker installationsprocedurer, sikkerhedsadvarsler og garantikrav.
Preview Installations- og garantivejledning til Intermatic IG1200RC3 overspændingsbeskyttelse
Detaljerede installationsvejledninger og tre års begrænset garantioplysninger for Intermatic IG1200RC3 Type 1 eller Type 2 overspændingsbeskyttelse. Dækker sikkerheds-, ledningsførings-, vedligeholdelses- og garantikravsprocedurer.
Preview Intermatic AG4803C3 Overspændingsbeskyttelsesenhed Installationsvejledning og garanti
Comprehensive installation instructions and a one-year limited warranty for the Intermatic AG4803C3 Type 1 or Type 2 Surge Protection Device. Includes safety warnings, installation steps, maintenance guidelines, and detailed textual descriptions of wiring diagrams.
Preview Intermatic IG3240RC3 Surge Protective Device (SPD) Installation and Warranty Guide
Comprehensive installation instructions and a ten-year limited warranty for the Intermatic IG3240RC3 Type 1 or Type 2 Surge Protective Device (SPD), covering product replacement and connected equipment protection.