Roland TD-4 Percussion Sound Module User Manual

1. Introduktion

This manual provides essential information for the proper setup, operation, and maintenance of your Roland TD-4 Percussion Sound Module. Please read this manual thoroughly to ensure optimal performance and longevity of your device. The Roland TD-4 is designed to be the central sound engine for your electronic drum kit, offering a variety of drum sounds and practice features.

2. Opsætning

Follow these steps to correctly set up your TD-4 Percussion Sound Module.

2.1 Udpakning og inspektion

Carefully remove the TD-4 module and included power cord from its packaging. Inspect all components for any signs of damage. If any items are missing or damaged, contact your retailer.

2.2 Tilslutning af strøm

1. Ensure the TD-4 module is powered off.
2. Connect the included power cord to the DC IN jack on the rear panel of the module.
3. Plug the other end of the power cord into a standard AC outlet.

Refer to the image below for the power connection point.

Billede 2.2.1: Rear panel of the Roland TD-4 module, illustrating the DC IN jack (far left), the multi-pin trigger input connector (center), and the L/MONO and R audio output jacks (right).

2.3 Connecting Drum Pads and Cymbals

Connect your electronic drum pads and cymbals to the multi-pin trigger input connector on the rear panel of the TD-4 module. This connector is designed to accept a single cable from a compatible Roland V-Drum pad set.

2.4 Connecting Audio Output

Connect the L/MONO and R audio output jacks on the rear panel to your amplifier, mixer, or headphones. Use the L/MONO jack for mono output.

The following images show various connection points on the module.

Billede 2.4.1: Side view of the Roland TD-4 module, displaying a 1/4-inch output jack and a smaller auxiliary input jack, typically used for headphones or external audio devices.

Billede 2.4.2: Modsatte side view of the Roland TD-4 module, featuring a standard 5-pin MIDI OUT port for connecting to other MIDI devices.

3. Betjeningsvejledning

This section details the basic functions and controls of the TD-4 module.

Billede 3.0.1: Front panel of the Roland TD-4 module, showing the LCD display, various control buttons (POWER, VOLUME, TUNING, MUFFLING, DRUM KIT, MENU, COACH, QUICK REC), and the data entry dial.

3.1 Betjeningselementer på frontpanelet

• POWER -knap: Turns the module on or off.
• VOLUME knap: Justerer den samlede udgangslydstyrke.
• TUNING Button: Accesses parameters for adjusting the pitch of individual drum sounds.
• MUFFLING Button: Accesses parameters for adjusting the decay or 'muffling' of drum sounds.
• DRUM KIT Buttons (< / >): Selects different preset or user drum kits.
• MENU knap: Enters the main menu for advanced settings.
• COACH Button: Activates the built-in coaching functions for practice.
• QUICK REC Buttons: Controls the quick recording and playback functions.
• Data Entry Dial: Used to change values and navigate menus.
• SEL (Select) Buttons (∧ / ∨): Bruges til navigation og valg i menuer.
• OK knap: Bekræfter valg eller åbner undermenuer.

3.2 Valg af trommesæt

To select a drum kit:

1. Tryk på DRUM KIT < or > buttons to cycle through available kits.
2. The selected kit number and name will appear on the LCD display.

3.3 Adjusting Tuning and Muffling

To adjust tuning or muffling for a specific pad:

1. Strike the pad you wish to adjust.
2. Tryk på TUNING or MUFFLING knap.
3. Brug Data Entry Dial for at justere parameteren.
4. Trykke OK for at bekræfte eller MENU at afslutte uden at gemme.

3.4 Using the Coach Function

The COACH function provides various exercises to improve your drumming skills.

1. Tryk på TRÆNER knap.
2. Brug SEL ∧ / ∨ buttons and the Data Entry Dial to select an exercise.
3. Trykke OK for at starte øvelsen.

3.5 Quick Recording

The Quick Rec function allows you to record and playback your performances.

1. Tryk på HURTIG OPTAGELSE button (record icon) to start recording.
2. Play your drum performance.
3. Tryk på HURTIG OPTAGELSE button (stop icon) to stop recording.
4. Tryk på HURTIG OPTAGELSE button (play icon) to playback your recorded performance.

4. Vedligeholdelse

Proper care ensures the longevity and reliable operation of your TD-4 module.

4.1 Rengøring

• Wipe the exterior of the module with a soft, dry cloth.
• For genstridigt snavs, brug en let damp klud og tør derefter straks efter.
• Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish.

4.2 Opbevaring

• Opbevar modulet et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Undgå opbevaring i områder med høj luftfugtighed eller støv.
• If storing for an extended period, disconnect the power cord.

5. Fejlfinding

This section addresses common issues you might encounter with your TD-4 module.

5.1 Ingen lydudgang

• Kontroller om modulet er tændt.
• Sørg for BIND knappen er skruet op.
• Verify that audio cables are securely connected to the L/MONO and R output jacks and to your amphøretelefoner/hovedtelefoner.
• Check the volume level on your amplifier eller høretelefoner.
• Ensure drum pads are correctly connected to the trigger input.

5.2 Incorrect Pad Response

• Ensure all pad cables are securely connected to the multi-pin trigger input.
• Check the pad settings within the module's menu (refer to the full owner's manual for detailed menu navigation).
• Verify that the correct pad type is assigned to each trigger input.

5.3 Module Freezes or Becomes Unresponsive

• Turn off the power, wait a few seconds, and then turn it back on.
• If the issue persists, perform a factory reset (refer to the full owner's manual for instructions on how to perform a factory reset).

6. Specifikationer

Key technical specifications for the Roland TD-4 Percussion Sound Module.