1. Introduktion
The Hanna Instruments HI 711 Checker HC is a handheld colorimeter designed for accurate and precise measurement of total chlorine levels. This device offers a simpler and more cost-effective alternative to chemical test kits while providing greater accuracy. It utilizes the EPA-approved DPD method 4500-Cl G, making it suitable for applications requiring this standard. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your HI 711 Checker HC.
2. Sikkerhedsoplysninger
Please read all instructions carefully before using the HI 711 Checker HC. Failure to do so may result in inaccurate readings or damage to the device. Always handle reagents with care and follow all safety precautions provided with the reagent kits. Keep the device and reagents out of reach of children.
3. Produktet er slutview
The HI 711 Checker HC is a compact, single-button operation device featuring a large LCD screen for easy readability. It is designed for portability and ease of use in various environments.
Billede 1: The Hanna Instruments HI 711 Checker HC Handheld Colorimeter shown with a sample vial. The device displays a reading of 0.87 ppm for Total Chlorine.
Nøglekomponenter omfatter:
- LCD-skærm: Shows measurement readings and operational prompts.
- Betjeningsknap: Used for powering on/off and initiating measurements.
- Cuvette Holder: Compartment for inserting sample hætteglas.
- Batterirum: Located at the rear for AAA battery installation.
4. Opsætning
4.1 Batteriinstallation
- Find batterirummet på bagsiden af enheden.
- Fjern batteridækslet.
- Insert one (1) AAA battery, ensuring correct polarity (+/-).
- Sæt batteridækslet forsvarligt på plads.
4.2 Indledende forberedelse
Before first use, ensure the cuvettes are clean and free from scratches or debris. Use distilled or deionized water for rinsing.
5. Betjeningsvejledning
The HI 711 Checker HC operates using a simple, single-button interface. Follow these steps for accurate total chlorine measurements:
- Tænd: Press the button to turn the Checker HC on. The display will show "---" then "Add C1".
- Zero the Device:
- Fill a clean cuvette with 10 mL of unreacted sample water (the water you wish to test, before adding reagent).
- Cap the cuvette and wipe it thoroughly with a lint-free cloth to remove any fingerprints or smudges.
- Insert the cuvette into the Checker HC, ensuring the cap is fully seated.
- Press the button. The display will show "Add C2" when zeroing is complete.
- Add Reagent:
- Remove the cuvette from the Checker HC.
- Add one packet of HI 711-0 Total Chlorine reagent to the sample i kuvetten.
- Cap the cuvette and shake gently for approximately 20 seconds to dissolve the reagent.
- Wipe the cuvette thoroughly with a lint-free cloth.
- Måle:
- Insert the cuvette back into the Checker HC.
- Press the button. The display will show a countdown timer (e.g., "2:00"). This is the reaction time required for the DPD method.
- After the countdown, the Checker HC will display the total chlorine concentration in ppm (parts per million).
- Sluk: The device features an auto shut-off function to conserve battery life. It will automatically turn off after 10 minutes of inactivity. To manually turn off, press and hold the button until "OFF" is displayed.
Billede 2: The Hanna Instruments HI 711 Checker HC showing a measurement of 0.82 ppm for Total Chlorine on its LCD screen.
6. Vedligeholdelse
6.1 Rengøring
- Always keep the cuvettes clean. Rinse them thoroughly with distilled or deionized water after each use.
- Wipe the exterior of the Checker HC with a soft, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Ensure the cuvette holder is clean and dry before storage.
6.2 Opbevaring
- Store the Checker HC in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for extended periods, remove the AAA battery to prevent leakage.
- Store reagents in their original packaging in a cool, dark place.
7. Fejlfinding
This section addresses common issues you might encounter with your HI 711 Checker HC.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Unøjagtige eller inkonsistente aflæsninger | Dirty cuvette, expired reagent, improper zeroing, air bubbles in sample | Clean cuvette thoroughly, use fresh reagent, ensure proper zeroing with unreacted sample, remove air bubbles by gently tapping the cuvette. |
| Enheden tænder ikke | Dead battery, incorrect battery installation | Replace AAA battery, check battery polarity. |
| "Err"-meddelelse på displayet | Measurement outside range, light interference | Sørg for sample is within the device's measurement range. Perform measurement in a stable light environment. Re-zero the device. |
8. Specifikationer
The following are the technical specifications for the Hanna Instruments HI 711 Checker HC:
- Model: HI-711
- Parameter: Samlet klor
- Metode: Adaptation of the EPA DPD method 4500-Cl G
- Strømkilde: 1 x AAA batteri
- Produktdimensioner: 5 x 3 x 4 tommer
- Vægt: 8.82 ounce
- Automatisk sluk: Efter 10 minutters inaktivitet
9. Garantioplysninger
Hanna Instruments products are warranted against defects in workmanship and materials when used for their intended purpose and maintained according to instructions. The specific warranty period may vary by region and product. Please refer to the warranty card included with your product or visit the official Hanna Instruments webwebstedet for detaljerede garantivilkår og -betingelser. Gem din købsbevis til garantikrav.
10. Kundesupport
For technical assistance, troubleshooting, or information regarding reagents and accessories, please contact Hanna Instruments customer support. You can find contact details on the official Hanna Instruments website or through your local distributor. When contacting support, please have your product model number (HI-711) and purchase date available.
