Phylrich KES25/004

Phylrich KES25/004 Regent vægmonteret sæbeskål brugermanual

Model: KES25/004

Indledning

This manual provides comprehensive instructions for the installation, usage, and maintenance of your Phylrich KES25/004 Regent Wall Mounted Soap Dish. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and care will ensure the longevity and optimal performance of your product.

Sikkerhedsoplysninger

Pakkens indhold

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact your retailer or Phylrich customer service.

Værktøj påkrævet

Følgende værktøjer er typisk nødvendige til installation:

Opsætning og installation

Follow these steps carefully to install your wall-mounted soap dish:

  1. Vælg placering: Select a suitable location on the wall, ensuring it is at a convenient height and away from direct water spray if possible. Use a level to ensure the mounting area is straight.
  2. Markér borepunkter: Use the provided installation template (if available) or hold the mounting plate against the wall at the desired location. Mark the screw hole positions with a pencil.
  3. Bor pilothuller: Using a drill with the appropriate drill bit size for the wall anchors, carefully drill pilot holes at the marked positions. If drilling into a wall stud, anchors may not be necessary, but ensure screws are suitable for wood.
  4. Indsæt vægankre: If drilling into drywall or tile, gently tap the wall anchors into the pilot holes until they are flush with the wall surface.
  5. Fastgør monteringsplade: Align the mounting plate with the drilled holes and secure it to the wall using the provided screws. Ensure the plate is firmly attached and level.
  6. Mount Soap Dish Fixture: Carefully align the main soap dish fixture with the mounting plate. Secure the fixture to the plate using the set screw(s) typically located on the underside of the fixture. Tighten the set screw(s) with a screwdriver until the fixture is snug and does not wobble.
  7. Insert Glass Dish: Place the glass soap dish into the brass holder. Ensure it sits securely.
Phylrich KES25/004 Regent Wall Mounted Soap Dish

Image: The Phylrich KES25/004 Regent Wall Mounted Soap Dish, featuring a clear glass dish set within a decorative brass fixture. The brass base is circular with a textured edge, designed for wall mounting.

Brug

The Phylrich KES25/004 Regent Wall Mounted Soap Dish is designed to hold a bar of soap conveniently in your bathroom. Simply place your bar of soap onto the glass dish. The wall-mounted design helps keep your countertop clear and organized.

Opretholdelse

Regular cleaning will help maintain the finish and appearance of your soap dish.

Fejlfinding

ProblemMulig årsagLøsning
Soap dish feels loose on the wall.Mounting screws or set screw are not tight.Gently tighten the mounting screws behind the fixture or the set screw(s) on the underside of the fixture. Do not overtighten.
Glass dish is wobbly.Dish not seated correctly or debris in holder.Remove the glass dish, inspect for debris, clean, and re-seat it firmly into the brass holder.
Finishen fremstår mat eller plettet.Hard water spots or improper cleaning agents.Rengør med en blød, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals. Dry immediately after cleaning.

Specifikationer

Garantioplysninger

Specific warranty details for the Phylrich KES25/004 Regent Wall Mounted Soap Dish are typically provided at the point of purchase or can be obtained directly from the manufacturer. Please refer to your purchase documentation or visit the official Phylrich webwebstedet for den seneste garantipolitik.

Kundesupport

For technical assistance, missing parts, or warranty inquiries, please contact your retailer or the manufacturer, Phylrich, directly. Contact information can usually be found on their official webwebstedet eller på din produktemballage.

Relaterede dokumenter - KES25/004

Preview Installationsvejledning til Phylrich 1-124 vægmonteret bidet
Omfattende installationsvejledning til Phylrich 1-124 vægmonteret bidet, med detaljerede oplysninger om ventilspecifikationer, deleoversigt, grove dimensioner, installationsprocedurer og vedligeholdelsestips for optimal ydeevne og levetid.
Preview Installationsvejledning og begrænset garanti til Phylrich Transition-serien af ​​toiletarmaturer
Omfattende installationsvejledning og begrænsede garantioplysninger for Phylrich Transition Series toiletarmatur med en tør-T-formet planmonteret ventil, opsætning af afdækning, afløbssamling og produktdækning.
Preview Installationsvejledning og begrænset garanti til Phylrich Jamestown-serien af ​​toiletarmaturer
Omfattende installationsvejledning til Phylrich Jamestown-seriens toiletarmatur med en tør-T-ventil til indbygning, inklusive detaljerede trin, diagrammer og information om den begrænsede livstidsgaranti.
Preview Installationsvejledning til Phylrich DFPHY & DFPHYID 1/2" trykbalanceringsventil
Omfattende installationsvejledning til Phylrich DFPHY og DFPHYID 1/2 tommer trykbalanceringsventil, der dækker generelle karakteristika, ventilspecifikationer, grovmål, temperaturindstillinger og vedligeholdelsesprocedurer.
Preview Installationsvejledning til Phylrich Jamestown-serien af ​​enkeltgrebs vandhaner med bredt greb
Omfattende installationsvejledning til Phylrich Jamestown-seriens enkeltgrebsarmatur med høj tud og vingegreb. Dækker tud-, ventil- og afløbssamling med detaljerede trin og tekstlige beskrivelser af diagrammer.
Preview Installationsvejledning til Jamestown-seriens vægtoiletsæt
Detaljeret installationsvejledning til Phylrich Jamestown-seriens væg-toiletsæt, inklusive model 165-11 (krydsgreb) og 165-12 (greb). Dækker tud, roset, montering af håndtag, justering af lister og udskiftning af patron med momentspecifikationer.