Phylrich Georgetown Brusesæt med to greb Brugermanual

Indledning

This user manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Phylrich Georgetown Two Handle Shower Set, Model K3160/015. Please read this manual thoroughly before beginning installation or operation to ensure proper function and longevity of your product.

The Phylrich Georgetown Two Handle Shower Set is designed for reliable performance and elegant aesthetics in your bathroom. It features a two-handle design for precise control over water temperature and flow.

Vigtige sikkerhedsoplysninger

Always follow basic safety precautions when installing or servicing plumbing fixtures. Failure to do so may result in personal injury or property damage.

• Sørg for, at vandforsyningen er slukket, før installation eller vedligeholdelse påbegyndes.
• Bær passende personlige værnemidler, såsom sikkerhedsbriller og handsker.
• Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret VVS-installatør.
• Do not overtighten connections, as this can damage the product.
• Hold små dele væk fra børn.

Komponenter og dele

Familiarize yourself with the components included in your Phylrich Georgetown Two Handle Shower Set.

Billede: Overview of the Phylrich Georgetown Two Handle Shower Set, showing the shower head assembly and the two distinct control handles. The finish appears to be polished brass or gold.

• Shower Head Assembly
• Hot Water Handle
• Cold Water Handle
• Valve Body (typically sold separately or integrated into wall rough-in)
• Escutcheons/Trim Plates
• Monteringshardware

Opsætning og installation

This section outlines the general steps for installing your shower set. Specific plumbing configurations may vary. It is recommended to consult a professional plumber for installation.

Nødvendige værktøjer og materialer:

• Justerbar skruenøgle
• Pipe Thread Sealant (Teflon Tape)
• Phillips hovedskruetrækker
• Niveau
• Målebånd
• Sikkerhedsbriller og handsker

Installationstrin:

1. Forbered installationsområdet: Ensure the water supply to the bathroom is completely shut off. Clear the work area and protect surrounding surfaces.
2. Install the Valve Body (if not already present): Follow the manufacturer's instructions for installing the rough-in valve body within the wall. Ensure it is level and securely mounted.
3. Tilslut vandledninger: Connect the hot and cold water supply lines to the appropriate inlets on the valve body. Use pipe thread sealant on all threaded connections to prevent leaks.
4. Install Shower Head Arm: Thread the shower arm into the wall fitting. Apply pipe thread sealant to the threads. Tighten securely with an adjustable wrench.
5. Fastgør brusehoved: Thread the shower head onto the shower arm. Hand-tighten, then use a wrench to tighten slightly more, being careful not to overtighten.
6. Install Handles and Trim: Place the escutcheons over the valve stems. Secure the handles onto the valve stems according to the specific design, typically with a set screw or by threading them on. Ensure handles operate smoothly.
7. Test for lækager: Slowly turn the main water supply back on. Check all connections for leaks. If leaks are present, turn off water, tighten connections, and retest.
8. Endelige justeringer: Ensure all components are aligned and securely fastened.

Betjeningsvejledning

The Phylrich Georgetown Two Handle Shower Set provides independent control over hot and cold water flow, allowing for precise temperature mixing.

• Tænd/sluk: Rotate the hot water handle (typically on the left) and the cold water handle (typically on the right) counter-clockwise to open the water flow. Rotate clockwise to close.
• Justering af temperatur: To achieve the desired water temperature, adjust the hot and cold handles simultaneously. Increase hot water for warmer temperatures, and increase cold water for cooler temperatures.
• Justering af flow: The overall water flow rate is controlled by how much both handles are opened. For maximum flow, open both handles fully.

Pleje og vedligeholdelse

Proper care and maintenance will ensure the lasting beauty and performance of your Phylrich shower set.

• Rensning: Rengør armaturet regelmæssigt med en blød,amp cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish. Mild soap and water are generally sufficient.
• Mineralforekomster: For hard water areas, mineral deposits may accumulate on the shower head nozzles. Gently rub the rubber nozzles with your finger or a soft brush to dislodge deposits. For stubborn deposits, a solution of equal parts white vinegar and water can be applied with a soft cloth, then rinsed thoroughly.
• Undgå skader: Do not use tools to tighten handles or other components unless specifically instructed, as this can cause damage.
• Vinterisering (hvis relevant): In areas subject to freezing temperatures, ensure all water lines are properly drained or protected to prevent damage from freezing.

Fejlfinding

This section provides solutions to common issues you might encounter with your shower set.

If the problem persists after attempting these solutions, please contact a qualified plumber or Phylrich customer support.

Specifikationer

Garantioplysninger

Phylrich products are manufactured to the highest quality standards. For specific warranty details regarding your K3160/015 shower set, please refer to the warranty card included with your product or visit the official Phylrich webwebsted. Gem din købsbevis til garantikrav.

Kundesupport

If you require further assistance, have questions about installation, or need to order replacement parts, please contact Phylrich customer support. Contact information can typically be found on the official Phylrich webwebstedet eller på produktemballagen.

Please have your model number (K3160/015) and date of purchase available when contacting support.