1. Produktet er slutview
The Neumann TLM 102 is a compact large-diaphragm condenser microphone designed for studio applications. It features a cardioid polar pattern and is capable of handling high sound pressure levels, making it suitable for recording various sound sources, including vocals, speech, acoustic instruments, percussion, and amplifiers. The microphone incorporates a transformerless circuit for minimal self-noise and a clear, uncolored sound reproduction.
Key characteristics include a slight presence boost above 6 kHz, which enhances vocal clarity in a mix, and an exceptionally fast transient response for accurate capture of acoustic instruments. An integrated pop screen helps to suppress plosive sounds during vocal recordings. The microphone's capsule is elastically suspended to reduce handling and structure-borne noise.
Image 1: The Neumann TLM 102 Large-Diaphragm Condenser Microphone in satin nickel finish.
2. Opsætning
To set up your Neumann TLM 102 microphone, follow these steps:
- Udpak komponenter: Carefully remove the TLM 102 microphone and the included stand mount from its packaging.
- Attach Stand Mount: Securely screw the stand mount onto a microphone stand. Ensure the stand is stable and capable of supporting the microphone's weight.
- Monter mikrofon: Insert the TLM 102 into the stand mount. The microphone should fit snugly.
- Tilslut XLR-kabel: Connect a standard 3-pin XLR microphone cable to the XLR output at the base of the TLM 102. Connect the other end of the XLR cable to an audio interface, mixer, or preampEnheden er en stikkontakt, der leverer 48V fantomstrøm.
- Aktivér fantomkraft: Ensure that 48V phantom power is activated on your audio interface, mixer, or preamplifier. The TLM 102 requires phantom power to operate.
Image 2: The Neumann TLM 102 microphone shown with an optional shock mount for enhanced isolation.
3. Betjeningsvejledning
The TLM 102 is a versatile microphone suitable for various recording scenarios. Consider the following for optimal performance:
- Mikrofonplacering: Due to its cardioid polar pattern, the TLM 102 is most sensitive to sounds directly in front of it and rejects sounds from the sides and rear. Position the microphone with the Neumann logo facing the sound source.
- Nærhedseffekt: Like all directional microphones, the TLM 102 exhibits a proximity effect, where bass frequencies are accentuated when the microphone is close to the sound source. Experiment with distance to achieve the desired tonal balance.
- Få Staging: Adjust the gain on your preamplifier to achieve a healthy signal level without clipping. The TLM 102 has a high maximum SPL (144 dB), allowing it to handle loud sources without distortion.
- Popfilter: The integrated pop screen helps reduce plosives. For very close vocal work, an external pop filter may provide additional protection.
- Optagelsesmiljø: While the cardioid pattern offers some rejection of off-axis sound, recording in an acoustically treated environment will yield the best results.
Image 3: The TLM 102 microphone capturing the sound of an acoustic guitar.
Image 4: The TLM 102 microphone used for recording drums, demonstrating its high SPL capability.
4. Vedligeholdelse
Proper care will ensure the longevity and performance of your TLM 102 microphone:
- Rensning: Use a soft, dry cloth to wipe the microphone body. Avoid using liquid cleaners or solvents, as these can damage the finish or internal components. Do not attempt to clean the grille or capsule directly.
- Opbevaring: Når mikrofonen ikke er i brug, skal den opbevares i dens originale emballage eller et beskyttende etui for at beskytte den mod støv, fugt og fysisk skade.
- Miljøforhold: Undgå at udsætte mikrofonen for ekstreme temperaturer, høj luftfugtighed eller direkte sollys.
5. Fejlfinding
If you encounter issues with your TLM 102, consider the following:
- Ingen lydoutput:
- Ensure 48V phantom power is activated on your audio interface/preamplivligere.
- Kontroller alle XLR-kabelforbindelser for korrekt montering og integritet.
- Verify that the input gain on your preamplifier is set appropriately.
- Test med et andet XLR-kabel eller en anden indgangskanal, hvis tilgængelig.
- Forvrænget lyd:
- Reduce the input gain on your preamplifier. The microphone may be receiving too strong a signal.
- Ensure the sound source is not excessively loud for the microphone's capabilities (though the TLM 102 has a high SPL rating).
- Overdreven støj/brummen:
- Tjek for jordsløjfer i dit lydsystem.
- Ensure all cables are properly shielded and not running parallel to power cables.
- Verify that the recording environment is free from electromagnetic interference.
6. Specifikationer
| Feature | Specifikation |
|---|---|
| Acoustical Operating Principle | Trykgradienttransducer |
| Retningsmønster | Cardioid |
| Frekvensområde | 20 Hz - 20 kHz |
| Sensitivity at 1 kHz into 1 kΩ | 11 mV/Pa |
| Nominel impedans | 50 Ω |
| Nominel belastningsimpedans | 1 kΩ |
| Equivalent Noise Level, CCIR | 21 dB |
| Equivalent Noise Level, A-weighted | 12 dB-A |
| Signal-to-Noise Ratio, CCIR (rel. 94 dB SPL) | 73 dB |
| Signal-to-Noise Ratio, A-weighted (rel. 94 dB SPL) | 82 dB |
| Maximum SPL for THD 0.5% | 144 dB |
| Maksimal output voltage | 13 dBu |
| Forsyning Voltage (P48, IEC 61938) | 48 V ± 4 V |
| Current Consumption (P48, IEC 61938) | 3.5 mA |
| Matching Connectors | XLR 3F |
| Vægt | Ca. 210 g (0.46 lbs) |
| Diameter | 52 mm (2.05 tommer) |
| Længde | 116 mm (4.57 tommer) |
| Materiale | Aluminium |
| Farve | Satin nikkel |
| Modelnummer | 008626 |
| UPC | 615104086265 |
7. Hvad er der i æsken
The Neumann TLM 102 package includes:
- Neumann TLM 102 Large-Diaphragm Condenser Microphone
- Stativmontering
8. Garanti og support
For warranty information, technical support, or service inquiries, please contact Neumann customer service or visit the official Neumann webwebsted. Gem din købsbevis til garantikrav.
Official Neumann Webwebsted: www.neumann.com
