Mighty Bright 53510 9-LED Orkesterlys Brugermanual

Indledning

This manual provides instructions for the Mighty Bright 53510 9-LED Orchestra Light. This light is designed to illuminate sheet music effectively, featuring nine energy-efficient LEDs and a flexible gooseneck for precise positioning. It can be powered by an AC adapter or batteries, offering versatility for various environments.

Figur 1: Forside view of the Mighty Bright 53510 9-LED Orchestra Light.

Pakkens indhold

• Mighty Bright 53510 9-LED Orchestra Light
• AC Power Adapter (US Adaptor)
• 3 AAA batterier
• Rejsetaske

Opsætning

Installation af batteri

1. Locate the battery compartment on the underside of the clip base.
2. Åbn batterirummets dæksel.
3. Isæt tre (3) AAA-batterier, og sørg for at polerne vender korrekt (+/-).
4. Luk batterirummets dæksel forsvarligt.

AC Adapter Tilslutning

1. Locate the power input jack on the side of the clip base.
2. Insert the small end of the AC power adapter into the power input jack.
3. Plug the larger end of the AC power adapter into a standard electrical outlet.
4. When using the AC adapter, batteries are not required for operation but can remain installed as a backup.

Montering af lyset

1. Identify a stable surface, such as a music stand, with a suitable edge for clipping.
2. Press the clip handles to open the broad, padded clip.
3. Position the clip firmly onto the edge of the music stand or desired surface.
4. Release the clip handles to secure the light in place. Ensure the light is stable before use.
5. Adjust the flexible gooseneck to direct the light beam onto your sheet music or workspace.

Figure 2: The light's clip and flexible gooseneck for mounting and positioning.

Operation

Tænd/sluk og justering af lysstyrke

1. Locate the sliding power button on the head of the light.
2. Slide the button to the first position for low brightness.
3. Slide the button to the second position for high brightness.
4. To turn off the light, slide the button back to the 'off' position.

Figure 3: The Orchestra Light in use, providing illumination for sheet music.

Opretholdelse

Rensning

Wipe the light with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or electronic components.

LED levetid

The integrated LEDs are designed for long-term use, with an estimated lifespan of 100,000 hours, and do not require replacement.

Batteripleje

If the light will not be used for an extended period, remove the AAA batteries to prevent leakage and potential damage to the device.

Fejlfinding

Lyset tænder ikke

• Check if the AC adapter is securely plugged into both the light and the power outlet.
• If using batteries, ensure they are inserted with correct polarity and are not depleted. Replace batteries if necessary.
• Verify the sliding power button is moved fully to one of the 'on' positions.

Lyset er svagt

• If using batteries, they may be low. Replace with fresh AAA batteries.
• Ensure the sliding power button is set to the high brightness position if maximum illumination is desired.

Specifikationer

Garanti og support

For garantioplysninger og kundesupport henvises til producentens officielle webwebstedet eller kontakt deres kundeserviceafdeling. Gem din købskvittering til garantikrav.