1. Introduktion
The Elation Professional SDC-6 v2 is a compact and versatile 6-channel DMX controller designed for easy operation of DMX-compatible lighting fixtures. It features six individual channel faders and one master fader, providing intuitive control over various lighting effects. This manual provides essential information for the safe and efficient use of your SDC-6 v2 controller, including setup, operation, maintenance, and troubleshooting.
2. Sikkerhedsinstruktioner
Please read these safety instructions carefully before operating the device. Failure to comply may result in damage to the unit, property, or personal injury.
- Tilslut altid enheden til en jordet stikkontakt.
- Ensure the power adapter's voltage matcher den lokale strømforsyning.
- Udsæt ikke enheden for regn, fugt eller for høj luftfugtighed.
- Undgå at placere enheden i nærheden af varmekilder eller i direkte sollys.
- Brug ikke enheden, hvis netledningen er beskadiget.
- Overlad al service til kvalificeret servicepersonale. Der er ingen dele indeni, som kan serviceres af brugeren.
- Afbryd strømmen før rengøring eller udførelse af vedligeholdelse.
3. Pakkens indhold
Kontroller, at alle nedenstående varer er til stede og i god stand, når du åbner pakken:
- Elation Professional SDC-6 v2 DMX Controller
- 9V strømadapter
- Brugervejledning (dette dokument)
4. Opsætning
Follow these steps to set up your SDC-6 v2 DMX controller:
- Placering: Place the controller on a stable, flat surface away from excessive heat, moisture, or dust.
- DMX-forbindelse: Connect the 3-pin DMX output connector of the SDC-6 v2 to the DMX input of your first DMX-compatible lighting fixture. If you have multiple fixtures, daisy-chain them by connecting the DMX output of the first fixture to the DMX input of the second, and so on.
- Strømtilslutning: Insert the 9V power adapter into the power input jack on the controller. Plug the power adapter into a suitable electrical outlet. The power indicator LED on the controller should illuminate.
Figur 4.1: Øverst view of the Elation SDC-6 v2 DMX Controller, showing the six channel faders, master fader, and power indicator.
Figur 4.2: Side view of the Elation SDC-6 v2 DMX Controller, illustrating the battery compartment for optional portable power (battery not included for primary operation).
5. Betjeningsvejledning
The SDC-6 v2 provides straightforward control over your DMX lighting fixtures.
5.1. Channel Faders (1-6)
Each of the six numbered faders (1 through 6) corresponds to a DMX channel. Moving a fader up increases the DMX value for that channel (from 0 to 255), while moving it down decreases the value. The specific function of each channel (e.g., dimmer, color, strobe) depends on the DMX address and mode settings of your connected lighting fixture.
5.2. Master Fader
The Master fader controls the overall output level of all active DMX channels. Moving the Master fader down will dim or turn off all lights controlled by the individual channel faders, regardless of their individual settings. Moving it up will restore the output to the levels set by the individual channel faders.
5.3. Strømindikator
The Power indicator LED illuminates when the unit is receiving power, indicating it is ready for operation.
6. Vedligeholdelse
Proper maintenance ensures the longevity and reliable operation of your SDC-6 v2 controller.
- Rensning: Use a soft, dry cloth to wipe the exterior of the unit. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Opbevaring: When not in use for extended periods, store the controller in a cool, dry place, protected from dust and extreme temperatures.
- Magt: Always disconnect the power adapter when the unit is not in use or before cleaning.
7. Fejlfinding
If you encounter issues with your SDC-6 v2 controller, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strømindikator | Strømadapteren er ikke tilsluttet eller defekt; stikkontakten er ikke aktiv. | Ensure power adapter is securely connected to the unit and a working outlet. Test the outlet with another device. |
| Lights not responding to faders | Incorrect DMX connection; Master fader is down; DMX address mismatch on fixtures; fixture not in DMX mode. | Check DMX cable connections. Ensure Master fader is up. Verify DMX addresses on fixtures match the channels being controlled. Confirm fixtures are set to DMX mode. |
| Intermitterende kontrol | Loose DMX cable connection; DMX signal interference. | Secure all DMX cable connections. Use high-quality DMX cables. Avoid running DMX cables parallel to power cables. |
8. Specifikationer
| Model | SDC6 |
| Mærke | Elation Professional (ADJ) |
| Kanaler | 6 DMX Channels + 1 Master Fader |
| DMX stik | 3-pin XLR DMX Output |
| Strømforsyning | 9V DC (via included power adapter) |
| Dimensioner (L x B x H) | 173 mm x 153 mm x 55 mm (6.81 tommer x 6.02 tommer x 2.17 tommer) |
| Vægt | 1 kg (2.2 lbs) |
| Farve | Sort |
| Oprindelsesland | Kina |
9. Garanti og support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elation Professional webwebsted. Gem din købsbevis til garantikrav.
For further assistance, you may contact the seller or manufacturer directly. Contact details are typically available on their respective websites or on your purchase invoice.
