Intermatic EI200 Electronic In-Wall Countdown Timer

Indledning

The Intermatic EI200 Electronic In-Wall Countdown Timer is designed for convenient and energy-efficient control of lighting and other electrical loads. This timer offers multiple preset countdown options and a continuous hold function, providing silent operation and automatic shut-off. Its compact design and easy-to-use interface make it an ideal solution for various residential and commercial applications.

Funktioner

• Provides 5/10/15/30 Minute time ranges
• Available in Ivory
• Provide silent operation
• Replaces single-pole switches in a variety of applications
• CFL compatible to all EI200 series timers (EI210W, EI220W, etc.), EI500C, EI500WC, EI500LAC, EI600C and EI600LAC
• For use with decorator-style wall plate (NOT included)

Opsætning (Installation)

ADVARSEL: TO AVOID FIRE, SHOCK, OR DEATH, TURN OFF POWER AT CIRCUIT BREAKER AND TEST THAT POWER IS OFF BEFORE WIRING.

1. Remove the existing wall plate and disconnect the light switch.
2. Ensure both the "hot" and neutral wires are present in the junction box.
3. Connect the red timer wire to the wire from the fixture using a wire connector. Connect the black timer wire to the "hot" (usually black or red) wire in the junction box using a wire connector. Connect the white timer wire to the neutral wire in the junction box (usually white). Connect the green timer wire to the ground wire (usually green or bare copper).
4. If the wall switch being replaced had separate grounding conductors connected to the GREEN screw, ensure these are connected to the green wire from the timer with a wire connector.
5. Kontroller, at alle ledningsforbindelser er sikre.
6. Carefully place all wires inside the junction box. Fit the timer into the junction box and secure it using the mounting screws.
7. Reconnect the electrical power at the circuit breaker.

Operation

The EI200 series timers provide silent operation with various time ranges and a continuous hold function.

Timer Mode

To activate the timer mode, press and release the push button (for less than 2 seconds) repeatedly until the desired time setting (5, 10, 15, or 30 minutes) is indicated by the illuminated LED. The connected load will automatically turn OFF once the selected countdown period is complete.

Hold-tilstand (kontinuerlig drift)

To engage the continuous operation (HOLD) mode, press and hold the push button for more than 2 seconds. The timer will enter HOLD mode, and the connected load will remain ON indefinitely. To exit HOLD mode, press and release the push button. The timer will then revert to the 5-minute countdown setting, and the connected load will turn OFF after 5 minutes.

Opretholdelse

The Intermatic EI200 timer is designed for long-term, maintenance-free operation. For cleaning, gently wipe the surface with a soft, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller de indvendige komponenter.

Fejlfinding

If you encounter any issues with your Intermatic EI200 timer, please refer to the detailed troubleshooting guide available on the official Intermatic website. Common issues may include incorrect wiring, power supply problems, or improper operation mode selection. Ensure all connections are secure and power is properly supplied to the unit.

Specifikationer

Garanti

The Intermatic EI200 comes with a 1-year warranty. This warranty covers replacement of the unit; labor costs are not included. For detailed warranty terms and conditions, please refer to the official Intermatic webwebsted eller kontakt kundesupport.

Støtte

For further assistance, product information, or to locate a service center, please visit the official Intermatic webwebsted: www.intermatic.com. You may also find helpful resources and FAQs on their support pages.