1. Introduktion
The Intermatic EI400C Electronic Countdown In-Wall Timer is designed to provide automatic shut-off functionality for various electrical loads, including indoor and outdoor lighting, bathroom fans, whole house fans, and other appliances. This timer offers precise control from 1 second to 24 hours, enhancing convenience and energy efficiency in your home or office. Its silent operation and simple push-button interface make it user-friendly, while its no-neutral wire requirement simplifies installation in most standard wall boxes.
2. Vigtige sikkerhedsoplysninger
WARNING: Risk of Electric Shock. Improper installation can lead to serious injury or death.
- Always turn off power at the circuit breaker or fuse box before installing or servicing the timer.
- Installationen skal udføres af en kvalificeret elektriker eller i overensstemmelse med alle lokale og nationale el-forskrifter.
- Do not use this timer with sunlamps, saunas, or any loads that could cause personal injury if timed incorrectly or if the timer malfunctions.
- Sørg for, at alle ledningsforbindelser er sikre og korrekt isolerede.
- Denne enhed er kun beregnet til indendørs brug.
3. Produktet er slutview
The Intermatic EI400C is an electronic countdown timer designed for in-wall installation. It features a digital display and intuitive controls for setting countdown durations.
3.1 Komponenter
- Digital skærm: Shows current time and countdown status.
- On/Off knap: Activates or deactivates the timer.
- Plus (+) / Minus (-) knapper: Adjust countdown duration.
- Pause knap: Temporarily stops the countdown.
- Batterirum: Houses the CR2 lithium battery.
3.2 Produktbilleder
4. Opsætning og installation
The Intermatic EI400C timer is designed for easy installation, compatible with single-pole or 3-way switch configurations and does not require a neutral wire connection.
4.1 Trin før installation
- Sluk for strømmen: Locate the circuit breaker or fuse that controls the switch you are replacing and turn off the power. Verify power is off using a voltage tester.
- Fjern eksisterende switch: Fjern forsigtigt vægpladen, og skru den eksisterende afbryder af vægdåsen. Frakobl ledningerne fra den gamle afbryder.
4.2 Ledningsinstruktioner
The EI400C timer is compatible with both single-pole and 3-way switch setups. Refer to the diagram provided with your product for specific wiring configurations. Generally, the timer will have two load wires and a ground wire. For 3-way applications, one of the traveler wires from the existing 3-way switch will be connected to the timer.
- Connect the timer's wires to the corresponding house wires using wire nuts.
- Sørg for, at alle forbindelser er tætte og sikre.
- The EI400C does not require a neutral wire, simplifying installation in older homes.
4.3 Mounting and Finalizing Installation
- Carefully push the wired timer into the wall box.
- Secure the timer to the wall box with the provided screws.
- Attach the decorative wall plate.
- Gendan strøm: Tænd for strømmen igen ved afbryderen.
4.4 Batteriinstallation
The timer comes with a replaceable CR2 lithium battery, which powers the internal clock and settings memory. The battery is typically pre-installed or needs to be inserted upon initial setup.
- Open the small front cover of the timer to access the battery compartment.
- Insert the CR2 lithium battery, observing the correct polarity.
- Luk batterirummets dæksel forsvarligt.
5. Betjeningsvejledning
The EI400C timer offers simple, push-button operation for setting countdown durations from 1 second to 24 hours.
5.1 Setting a Countdown Time
- Adgangskontrol: Gently open the front cover of the timer to reveal the control buttons.
- Juster tid: Brug + og - buttons to set the desired countdown duration. The display will show the selected time.
- Start timer: Tryk på Til/Fra button to activate the timer. The connected load will turn on, and the timer will begin counting down.
5.2 Turning Off Before Countdown Ends
If you wish to turn off the connected load before the set countdown time expires, simply press the Til/Fra button again. This will immediately turn off the load and reset the timer.
5.3 Pausefunktion
Tryk på Pause button to temporarily halt the countdown. The connected load will remain on. Press Pause igen for at genoptage nedtællingen.
5.4 Lockable Settings
The timer features lockable settings to prevent unintended changes to the program. Refer to the detailed instructions included in the product packaging for how to activate and deactivate this feature.
5.5 Visual/Audible Warnings
The EI400C can be configured to provide a visual or audible warning before the timer turns off. Consult the full product manual for steps on enabling and customizing these warning options.
5.6 Instruktionsvideo
Video 1: An official Intermatic video providing an overview of their in-wall timers, including the EI400 series. This video demonstrates general features and benefits of Intermatic in-wall timers, which are applicable to the EI400C model.
6. Vedligeholdelse
The Intermatic EI400C timer requires minimal maintenance, primarily focusing on battery replacement.
6.1 Udskiftning af batteri
The internal CR2 lithium battery provides power for the timer's memory and display, typically lasting up to three years. When the battery is low, a 'LoBatt' indicator may appear on the display.
- Open the front cover of the timer.
- Carefully remove the old CR2 battery from its compartment.
- Isæt et nyt CR2 lithiumbatteri, og sørg for at polariteten vender korrekt.
- Luk frontdækslet forsvarligt.
Note: Some users have reported that the battery compartment cover can be difficult to open or may not stay securely closed after multiple battery changes. Exercise care when opening and closing the compartment. If the cover does not stay closed, ensure the battery makes proper contact.
7. Fejlfinding
This section addresses common issues you might encounter with your Intermatic EI400C timer.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Timer display is blank or shows 'LoBatt' | Low or dead CR2 battery, or poor battery contact. | Replace the CR2 lithium battery. Ensure the battery is inserted correctly and the compartment cover is securely closed to maintain contact. |
| Timer shows 'NoOP' error | Indicates a problem with battery contact or internal operation. | Check and re-seat the CR2 battery. If the issue persists, the unit may require replacement. |
| Connected load does not turn on/off | No power to the timer, incorrect wiring, or faulty load. | Verify power at the circuit breaker. Double-check wiring connections according to the installation instructions. Test the connected load (e.g., light bulb) with a different switch or power source. |
| Difficulty opening battery compartment cover | Tight fit or worn plastic tabs. | Use a small, flat-head screwdriver to gently pry open the cover. Be careful not to damage the plastic tabs. |
| Timer does not hold settings after power outage | Dead or missing CR2 battery. | The CR2 battery maintains settings during power outages. Ensure it is installed and functional. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | EI400C |
| Mærke | Intermatic |
| Farve | Elfenben |
| Materiale | Plast |
| Voltage | 120-277 VAC |
| Maksimal belastning | 20 Amps |
| Timer rækkevidde | 1 Second to 24 Hours |
| Switch Type | Enkeltpolet eller 3-vejs |
| Monteringstype | Standard Wall Box, Rectangular Decorator Wall Plate |
| Batteri påkrævet | 1 CR2 Lithium (included) |
| Batterilevetid | Op til 3 år |
| Dimensioner | 4.13 x 1.75 x 1.2 tommer |
| Varens vægt | 6 ounces (0.38 pund) |
| Certificering | CSA-certificeret |
| UPC | 078275101371 |
9. Garanti og support
9.1 Garantioplysninger
The Intermatic EI400C Electronic Countdown In-Wall Timer comes with a 5 års begrænset garantiDenne garanti dækker materiale- og fabrikationsfejl ved normal brug. Gem venligst din købsbevis i tilfælde af garantikrav.
9.2 Kundesupport
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Intermatic customer support. Refer to the official Intermatic webwebstedet eller produktemballagen for de mest aktuelle kontaktoplysninger.
Online ressourcer: Besøg Intermatic Store on Amazon for yderligere produktinformation og ressourcer.
