PHILIPS PL-L 18W/830 4P 2G11 Kompaktlysstofrør Lamp Instruktionsmanual

Indledning

This manual provides essential information for the safe and effective use of your PHILIPS PL-L 18W/830 4P 2G11 Compact Fluorescent Lamp. denne lamp is designed for commercial interior lighting applications, including 2'x2' fixtures, 1'x2' fixtures, and indirect lighting. Please read these instructions carefully before installation and operation.

Sikkerhedsoplysninger

• Always turn off power to the fixture before installing or removing the lamp.
• Sørg for at lamp is cool before handling.
• Do not use in dimmable fixtures unless explicitly stated as compatible.
• Handle with care to avoid breakage. Broken fluorescent lamps contain mercury and should be disposed of according to local regulations.
• Denne lamp is designed for indoor use in appropriate fixtures.

Produkt overview

The PHILIPS PL-L 18W/830 4P 2G11 is an energy-efficient compact fluorescent lamp. It features a 4-pin 2G11 base and provides 3000 Kelvin white light with 1200 lumens of brightness.

Billede 1: PHILIPS PL-L 18W/830 4P 2G11 Kompaktlysstofrør Lamp. This image shows the tubular lamp with its 4-pin base.

Opsætning og installation

1. Bekræft kompatibilitet: Ensure your fixture is designed for a 4-pin 2G11 base compact fluorescent lamp and matches the lamp's wattage (18W) og vol.tage (120V).
2. Sluk: Before beginning installation, always turn off the power supply to the lighting fixture at the circuit breaker or fuse box.
3. Fjern gammel Lamp (hvis relevant): Hvis du udskifter en eksisterende lamp, allow it to cool completely. Gently grasp the old lamp and pull it straight out from the fixture's socket.
4. Indsæt ny Lamp: Align the four pins of the new PHILIPS PL-L 18W/830 lamp with the corresponding slots in the 2G11 socket. Gently push the lamp direkte ind i soklen, indtil den sidder fast. Tving ikke l'enamp.
5. Gendan strøm: Når den lamp er sikkert installeret, skal strømmen til armaturet genoprettes.
6. Prøve: Tænd lyskontakten for at bekræfte korrekt funktion.

Hvis lamp does not light, ensure it is fully seated in the socket and that power is restored to the fixture.

Betjeningsvejledning

The PHILIPS PL-L 18W/830 4P 2G11 lamp operates immediately upon receiving power from a compatible fixture. No special operating procedures are required beyond standard light switch control.

• Ensure the fixture's ballast is compatible with 18W PL-L lamps.
• Avoid frequent on/off cycling, as this can reduce the lamp's levetid.

Opretholdelse

Denne lamp requires minimal maintenance. Regular cleaning of the fixture and lamp can help maintain optimal light output.

• Rensning: Turn off and disconnect power to the fixture. Allow the lamp to cool. Gently wipe the lamp with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the lamp.
• Udskiftning: Udskift lamp when it reaches the end of its rated life (approximately 15,000 hours) or if it begins to flicker or fail. Follow the installation steps for replacement.

Fejlfinding

Specifikationer

Oplysninger om bortskaffelse

Kompakt fluorescerende lamps contain a small amount of mercury. Due to environmental concerns, these lamps should not be disposed of in regular household trash. Please recycle them according to local, state, and federal regulations. Many retailers and local waste management facilities offer recycling programs for CFLs.

For more information on recycling CFLs, please visit EPA's CFL Recycling and Disposal page (eksample link, actual link might vary by region).

Support og kontakt

For further assistance or inquiries regarding your PHILIPS PL-L 18W/830 4P 2G11 lamp, please contact Philips customer support or visit the official Philips webwebsted.

• Philips Officiel Webwebsted: www.philips.com
• Se produktemballagen for specifikke regionale kontaktoplysninger.