BriskHeat FGPDHC55120D Fulddækkende tromlevarmer Brugsanvisning

1. Introduktion

The BriskHeat FGPDHC55120D Full-Coverage Drum Heater is designed to efficiently heat and maintain the temperature of contents within 55-gallon (208-liter) plastic drums. This unit provides uniform heat distribution, freeze protection, viscosity control, and temperature maintenance for various materials. It features built-in insulation and an integrated digital temperature controller for precise operation.

A gray full-coverage drum heater, model FGPDHC55120D, is shown wrapped around a blue plastic drum. It features an integrated control box and power cord.

2. Sikkerhedsoplysninger

Please read and understand all safety instructions before installing, operating, or maintaining this product. Failure to follow these instructions may result in property damage, injury, or death.

• Læs alle instruktioner: Familiarize yourself with the entire manual before use.
• Elektrisk sikkerhed: Ensure the heater is connected to a properly grounded 120V power outlet. Do not use extension cords unless absolutely necessary and ensure they are rated for the heater's wattage.
• Miljø: This heater is designed for indoor/dry environments (IP4X). Do not operate in hazardous, explosive, or wet locations unless specifically certified for such use.
• Afbryd strømmen: Always disconnect power to the heater before installation, removal, cleaning, or any maintenance.
• Undgå kontakt: Do not touch the heating element or the drum heater surface when it is powered on, as it can be hot.
• Tromletype: This model is specifically designed for plastic drums. Do not use with metal drums.
• Ingen fordybelse: Do not immerse the heater in any liquid.
• Ventilation: Ensure adequate ventilation around the drum and heater.
• Temperaturovervågning: Monitor the drum contents' temperature to prevent overheating, especially with temperature-sensitive materials. The integrated safety thermostat provides an additional layer of protection.
• Skade: Do not operate the heater if the power cord, control box, or heater blanket shows any signs of damage.

3. Produktfunktioner

The BriskHeat FGPDHC55120D offers several features for effective and safe drum heating:

An image showing the BriskHeat Full-Coverage Drum Heater in an industrial setting, surrounded by various drums and IBC totes, illustrating its application for heating drum contents.

A hexagonal diagram highlighting the primary functions of the drum heater: preventing freezing, suitability for indoor/dry environments, ensuring safe working conditions, controlling viscosity, maintaining temperature, and managing heat-up processes.

• Full-Coverage Design: Wraps around the entire drum to provide even heat distribution and maximize energy efficiency.
• Built-in Insulation: Keeps heat concentrated on the drum contents, improving efficiency and reducing heat loss.
• Digital temperaturregulator: Allows for precise temperature setting and monitoring, programmable in both Fahrenheit and Celsius.
• Sikkerhedstermostat: Integrated safety thermostat set at 185°F (85°C) to prevent overheating.
• Holdbar konstruktion: Features an extra-durable polyester outer cloth with melamine insulation material for long service life.
• Nem installation: Adjustable nylon straps with buckles ensure a secure and snug fit around the drum.

An image detailing specific design aspects: drum wrap covering for heating contents, extra-durable polyester outer cloth for long service life, insulated full-coverage design for even heat distribution, ideal for indoor/dry environments (IP4X), and easy installation with adjustable nylon straps and buckles.

4. Opsætning

Follow these steps to set up your BriskHeat FGPDHC55120D Drum Heater:

1. Pak ud og undersøg: Carefully remove the drum heater from its packaging. Inspect the unit, power cord, and control box for any visible damage. Do not proceed with installation if damage is found.
2. Prepare Drum: Ensure the 55-gallon plastic drum is clean, dry, and free of any debris or obstructions on its exterior surface.
3. Wrap Heater: Position the drum heater around the drum. Ensure the heater covers the desired area of the drum for optimal heating.
4. Secure Heater: Use the adjustable nylon straps and buckles to securely fasten the heater around the drum. The fit should be snug to ensure good thermal contact, but not overly tight to avoid damage to the heater or drum.
5. Position Control Box: Ensure the integrated control box is positioned in an accessible location for easy operation and monitoring.
6. Tilslut strøm: Plug the power cord into a standard 120V, grounded electrical outlet. Ensure the outlet is capable of supplying the required 770W.

5. Betjeningsvejledning

The BriskHeat FGPDHC55120D features an easy-to-use digital temperature controller.

1. Tænd: Once plugged into a grounded 120V outlet, the digital display on the control box will illuminate, indicating the unit is powered.
2. Indstil temperatur: Use the buttons on the digital controller to set your desired operating temperature. The controller allows programming in both Fahrenheit (°F) and Celsius (°C). Refer to the specific controller's manual for detailed programming steps if advanced settings are required.
3. Overvågning: The controller will display the current temperature of the drum contents (or heater surface, depending on sensor placement) and will automatically activate or deactivate the heating element to maintain the set temperature.
4. Sikkerhedstermostat: The heater is equipped with an internal safety thermostat that will interrupt power to the heating element if the temperature exceeds 185°F (85°C), providing protection against overheating.
5. Sluk: To turn off the heater, simply unplug the unit from the power source.

6. Vedligeholdelse

Proper maintenance ensures the longevity and efficient operation of your drum heater.

• Rensning: Always disconnect the heater from the power source before cleaning. Wipe the exterior surface of the heater blanket and control box with a damp klud. Brug ikke slibende rengøringsmidler, opløsningsmidler, og nedsænk ikke enheden i vand.
• Inspektion: Periodically inspect the entire unit for signs of wear, cuts, fraying, or damage to the power cord, control box, or heater blanket. If any damage is observed, discontinue use immediately and contact BriskHeat for service.
• Opbevaring: When not in use, store the drum heater in a clean, dry environment, away from direct sunlight, extreme temperatures, and corrosive materials. Ensure it is neatly folded or rolled to prevent damage to the heating elements.

7. Fejlfinding

If you encounter issues with your drum heater, refer to the following troubleshooting guide:

• Varmeapparat tænder ikke:
  • Check if the power cord is securely plugged into a functional 120V grounded outlet.
  • Verify that the electrical outlet has power (test with another device).
  • Ensure the digital controller display is illuminated. If not, there may be a power issue.
• Heater Not Reaching Set Temperature:
  • Confirm that the set temperature on the controller is higher than the current temperature of the drum contents.
  • Ensure the heater is snugly wrapped around the drum and the straps are secure to maximize thermal contact.
  • Check if the ambient temperature is excessively low, which might exceed the heater's capacity to reach higher temperatures quickly.
  • For very cold or frozen contents, initial heat-up time will be significantly longer.
• Heater Overheating (Safety Thermostat Activated):
  • If the safety thermostat activates (heater stops heating at 185°F/85°C), unplug the unit and allow it to cool down.
  • Re-evaluate your set temperature and the environmental conditions. Ensure the drum heater is not covered by additional insulating materials that could trap excessive heat.
• Error Codes on Digital Controller:
  • If the digital controller displays an error code, refer to the specific manual provided with the controller for interpretation and resolution steps.

If troubleshooting steps do not resolve the issue, contact BriskHeat customer support for assistance.

8. Specifikationer

A table summarizing key specifications: Operating Temperature up to 160°F (71°C), Programmable Digital Controller, Safety Thermostat at 185°F (85°C), 360° Heat Distribution, Dielectric Strength >2000 Volts, and a 6 ft (1.8 m) Power Cord.

9. Garanti og support

For warranty information, technical support, or service inquiries regarding your BriskHeat FGPDHC55120D Full-Coverage Drum Heater, please contact BriskHeat Corporation directly.

Fabrikant: BriskHeat Corporation

Visit the official BriskHeat website or their Amazon store for the most current support resources, contact details, and product information:

BriskHeat Store on Amazon