1. Produktet er slutview
This adjustable tilt wall mount bracket is designed to securely hold flat panel LCD/plasma televisions and monitors ranging from 36 to 63 inches. Constructed from toughened steel, it supports a maximum weight capacity of 165 lbs. The mount features a variable downward tilt from 0° to -15°, allowing for optimal viewing angles. It is compatible with TVs where mounting holes are 28 inches or less horizontally and 18.5 inches or less vertically. The design includes simple-to-align brackets and a wall plate suitable for mounting to two studs or concrete surfaces, ensuring a straightforward installation process.
Nøglefunktioner omfatter:
- Farve: Black scratch-resistant finish.
- Kompatibilitet: Fits most 36" to 63" LCD and Plasma TVs, supporting VESA standards up to 750 x 450.
- Vippefunktion: Adjustable from 0° to -15° downward tilt.
- Vægt kapacitet: Maximum 165 lbs.
- Installation: Quick and easy installation with included mounting hardware.
Billede 1.1: Forside view of the adjustable tilt wall mount bracket, showing the main wall plate and the two vertical TV brackets attached, ready for installation.
2. Sikkerhedsoplysninger
Please read all instructions carefully before installation. If you have any doubts about the installation process, consult a qualified professional. Incorrect installation can lead to serious injury or damage to equipment.
- Vægtgrænse: Overskrid ikke den maksimale vægtkapacitet på 75 kg.
- Skærmstørrelse: Ensure your TV's screen size is within the recommended range of 36" to 63".
- Monteringsoverflade: The wall mount must be securely fastened to a structural support (e.g., wood studs, concrete wall). Do not install on drywall alone.
- Værktøjer: Brug passende værktøj til installationen. Bær sikkerhedsbriller.
- Børn: Hold børn væk fra installationsområdet.
- Hardware: Use only the provided mounting hardware. If your TV requires different screws, consult your TV's manual.
- Nivellering: Ensure the mount is level before attaching the TV to prevent uneven weight distribution.
3. Pakkens indhold
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact your retailer for assistance.
- Vægplademontering
- TV Brackets (2 units)
- Monteringssæt (forskellige skruer, skiver, afstandsstykker, ankre)
- Installationsvejledning (denne vejledning)
Billede 3.1: Bagside view of the wall mount bracket, showing the flat wall plate with multiple mounting holes and the attached TV brackets.
4. Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | AM11-B-4352 |
| Produktdimensioner | 32 x 4 x 8.9 tommer |
| Varens vægt | 15 pund |
| Materiale | Legeret stål |
| Farve | Sort |
| Kompatible enheder | Television (36" to 63" flat panel LCD/Plasma) |
| Monteringstype | Vægmontering |
| Bevægelsestype | Tilt |
| Maksimal hældningsvinkel | 15 Degrees (downward) |
| Maksimal vægtkapacitet | 165 lbs (75 kg) |
| VESA-kompatibilitet | Up to 750 x 450 (Mounting holes on TV: 28" or less horizontally, 18.5" or less vertically) |
5. Opsætning og installation
This section outlines the steps for safely installing your wall mount. It is recommended that two people perform the installation.
5.1 Nødvendigt værktøj (medfølger ikke)
- Stolpefinder (til montering af træstolper)
- Bor med passende bor
- Niveau
- Blyant
- Målebånd
- Topnøgle eller justerbar nøgle
- Phillips skruetrækker
5.2 Montering af TV-beslag på dit TV
- Placer forsigtigt dit tv med forsiden nedad på en blød, ren overflade for at forhindre, at skærmen beskadiges.
- Identificer VESA-monteringshullerne på bagsiden af dit tv.
- Select the correct screws, washers, and spacers from the hardware kit that fit your TV's mounting holes. Refer to your TV's manual for recommended screw sizes.
- Attach the two vertical TV brackets to the back of your TV using the selected hardware. Ensure the brackets are oriented correctly (hooks facing downwards) and are securely tightened. Do not overtighten.
Billede 5.2: Side view of the wall mount bracket, highlighting the tilt adjustment mechanism and the robust construction.
5.3 Montering af vægpladen på væggen
- Bestem monteringssted: Choose a location on the wall where you want to mount your TV. Consider viewing height and proximity to power outlets.
- Find stolper (til montering af træstolper): Use a stud finder to locate the centers of two adjacent wood studs. Mark these locations with a pencil. The wall plate is designed to span two studs.
- Placering af vægplade: Hold the wall plate against the wall at the desired height. Use a level to ensure it is perfectly horizontal. Mark the drill holes through the wall plate onto the wall.
- Bor pilothuller:
- Til træstolper: Drill pilot holes into the center of the marked studs using a drill bit slightly smaller than the lag bolts.
- Til beton-/murstensvægge: Drill pilot holes using a masonry drill bit. Insert wall anchors into the drilled holes until flush with the wall surface.
- Sikker vægplade: Align the wall plate with the drilled holes. Insert the lag bolts (for wood studs) or concrete anchors and screws (for concrete/brick) through the wall plate and into the pilot holes. Tighten all bolts securely with a socket wrench. Do not overtighten to avoid stripping.
Billede 5.3: Vinklet view of the wall mount bracket, illustrating the range of tilt possible and the locking mechanism.
5.4 Ophængning af tv'et på vægpladen
- With assistance, carefully lift the TV (with attached brackets) and hook the TV brackets onto the top edge of the wall plate.
- Sænk forsigtigt tv'et, indtil beslagene sidder helt fast på vægpladen.
- Locate the safety screws or locking mechanisms at the bottom of the TV brackets. Secure these to prevent the TV from accidentally lifting off the wall plate.
- Perform a gentle pull test to ensure the TV is securely mounted.
Billede 5.4: Nærbillede af siden view of the wall mount bracket, detailing the robust construction and the secure attachment points for the TV brackets.
6. Operating Instructions: Tilt Adjustment
This wall mount allows for a downward tilt adjustment from 0° to -15° to optimize your viewoplevelse og reducere blænding.
- To adjust the tilt, locate the tilt adjustment knobs or bolts on the side of the TV brackets.
- Løsn disse knapper/bolte en smule.
- Carefully tilt the TV to the desired downward angle.
- Once the desired angle is achieved, securely tighten the tilt adjustment knobs/bolts to lock the TV in place. Ensure both sides are tightened evenly.
Image 6.1: Two views of the wall mount bracket, demonstrating its design from slightly different angles, emphasizing its adjustability.
7. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer vægbeslagets levetid og sikre drift.
- Rensning: Tør holderen af med en blød, tør klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
- Periodisk eftersyn: Periodically check all screws and bolts to ensure they remain tight. Over time, vibrations or movement can cause fasteners to loosen.
- Skadetjek: Inspect the mount for any signs of damage, corrosion, or wear. If any damage is observed, do not use the mount and contact your retailer for advice.
8. Fejlfinding
Hvis du støder på problemer under eller efter installationen, kan du se følgende almindelige problemer og løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| TV'et er ikke i vater | Wall plate was not installed level. | Remove TV, loosen wall plate bolts, adjust with a level, and re-tighten. Re-hang TV. |
| TV does not fit the mount | Forkert VESA-mønster eller tv-størrelse. | Verify your TV's VESA pattern and weight against the mount's specifications (max 750x450 VESA, 165 lbs). |
| Tilt adjustment is loose or stiff | Adjustment knobs/bolts are not properly tightened or lubricated. | Ensure adjustment knobs/bolts are tightened after setting the desired tilt. If stiff, a small amount of silicone lubricant may be applied to moving parts (avoiding contact with TV). |
| Missing hardware | Pakkens indhold er ufuldstændigt. | Contact your retailer for replacement parts. |
9. Garanti og support
For specific warranty information regarding this product, please refer to the documentation provided at the time of purchase or contact the retailer directly. Warranty terms and conditions may vary.
For technical support or inquiries, please contact the customer service department of the retailer or manufacturer. Keep your purchase receipt as proof of purchase.
