Indledning
Thank you for choosing the MEBUS Analog Radio-Controlled Alarm Clock, Model 25362. This alarm clock combines a classic retro design with modern radio-controlled timekeeping technology, ensuring precise time display and automatic adjustments for daylight saving. This manual provides essential information for setting up, operating, and maintaining your alarm clock.
Billede: Forside view of the MEBUS Analog Radio-Controlled Alarm Clock 25362, showcasing its silver retro design and clear analog dial.
Sikkerhedsoplysninger
- Udsæt ikke enheden for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
- Undgå at tabe vækkeuret eller udsætte det for hårde stød.
- Forsøg ikke at åbne eller reparere enheden selv. Kontakt kvalificeret personale for service.
- Bortskaf batterier ansvarligt i henhold til lokale regler.
Pakkens indhold
- MEBUS Analog Radio-Controlled Alarm Clock 25362
- 1 x 1.5V Type C (LR14) Battery
Produktegenskaber
- Radio-Controlled Time (DCF 77): Automatic time synchronization, including summer and winter time adjustments.
- Snooze-funktion: Temporarily pauses the alarm for 5 minutes.
- Belysning af skive: Warm white backlight for reading time in the dark.
- Lysende hænder: Fluorescent hands glow in the dark after exposure to light.
- Retro design: Attractive metallic silver finish with rounded corners and a chrome-look button.
- Classic Ticking Sound: Features a traditional, audible ticking sound.
Image: Visual representation of the alarm clock's key features, including its classic ticking sound, luminous hands, automatic radio-controlled movement, and button-activated display illumination.
Opsætning
1. Batteriinstallation
- Find batterirummet på bagsiden af vækkeuret.
- Åbn batterirummets dæksel.
- Insert one 1.5V Type C (LR14) battery, ensuring correct polarity (+/-).
- Luk batterirummets dæksel forsvarligt.
2. Initial Time Synchronization (Radio Control)
After inserting the battery, the alarm clock will automatically attempt to synchronize with the DCF 77 radio signal. This process may take a few minutes. Ensure the clock is placed in an area with good signal reception, away from electronic interference.
- The clock hands will move to 12:00 and then begin searching for the signal.
- Når signalet modtages, indstiller uret sig automatisk til det korrekte tidspunkt.
- If synchronization fails, the clock will attempt to resynchronize periodically.
Image: The alarm clock displaying a radio signal icon, indicating its radio-controlled time synchronization feature.
Betjeningsvejledning
1. Indstilling af alarmtidspunktet
- Locate the alarm setting knob on the back of the alarm clock.
- Rotate the knob to move the alarm hand to your desired wake-up time.
- Ensure the alarm switch (usually a small slider) on the back is in the 'ON' position to activate the alarm.
2. Brug af snooze-funktionen
When the alarm sounds, press the large 'LIGHT / SNOOZE' button located on the top of the alarm clock. The alarm will pause for approximately 5 minutes and then sound again.
3. Aktivering af baggrundsbelysningen
To illuminate the dial in the dark, press the 'LIGHT / SNOOZE' button on the top of the alarm clock. The warm white backlight will activate, allowing you to read the time clearly. The light will turn off automatically after a short period.
4. Lysende visere
The hour and minute hands of the alarm clock are coated with a fluorescent material. After being exposed to light, these hands will glow in the dark, providing visibility without needing to activate the backlight.
Billede: Nærbillede view of the alarm clock, highlighting the top-mounted 'LIGHT / SNOOZE' button and the alarm setting knob on the rear for precise alarm time adjustment.
Image: The alarm clock displayed in a dimly lit environment, demonstrating the warm white backlight feature for easy time reading at night.
Opretholdelse
1. Rensning
Wipe the alarm clock with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
2. Udskiftning af batteri
When the display dims or the clock stops functioning, it is time to replace the battery. Follow the battery installation steps outlined in the 'Setup' section.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Uret indstiller ikke tiden automatisk. | Poor radio signal reception; battery low. | Move the clock to a different location, away from electronic devices or large metal objects. Ensure the battery is fresh. Note that DCF 77 signal reception can be affected by geographical location (e.g., outside Central Europe). |
| Alarmen lyder ikke. | Alarm switch is OFF; alarm time not set correctly; battery low. | Check that the alarm switch on the back is in the 'ON' position. Verify the alarm hand is set to the desired time. Replace the battery if needed. |
| Baggrundsbelysningen er svag eller virker ikke. | Lavt batteri. | Udskift batteriet. |
Specifikationer
- Mærke: Mebus
- Modelnummer: 25362
- Farve: Sølv
- Materiale: Plast
- Dimensioner (L x B x H): 5 x 12 x 10 cm
- Varens vægt: 246 g
- Skærmtype: Analog
- Strømkilde: 1 x 1.5V Type C (LR14) Battery (included)
- Særlige funktioner: Retro design, Radio movement (DCF 77), Backlight, Snooze, Luminous hands, Classic ticking sound.
Image: A diagram illustrating the compact dimensions of the alarm clock: 5 cm depth, 12 cm width, and 10 cm height, ideal for a bedside table.
Garanti og support
For warranty information or technical support, please refer to the retailer where you purchased the product or visit the official Mebus webwebsted. Gem din købsbevis i tilfælde af garantikrav.
