1. Introduktion
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Brilliant AG 96104/11 Tyler IP44 Outdoor Wall Light. Please read this manual thoroughly before installation and retain it for future reference. This outdoor product is designed to illuminate your exterior spaces.
2. Sikkerhedsoplysninger
- Elektrisk sikkerhed: Installation should only be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect the main power supply before attempting any installation, maintenance, or bulb replacement.
- IP44-klassificering: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but should not be submerged in water.
- Krav til pære: Use only E27 incandescent bulbs or compatible LED/CFL bulbs with a maximum wattagpå 60 W. Overskridelse af den maksimale watttage kan forårsage overophedning og beskadigelse af armaturet.
- Håndtering: Håndter glaskomponenterne forsigtigt for at forhindre brud.
- Ventilation: Sørg for tilstrækkelig ventilation omkring armaturet under drift.
3. Pakkens indhold
Kontroller venligst, at alle komponenter er til stede og ubeskadigede før installation.
- 1x Brilliant AG 96104/11 Tyler Outdoor Wall Light Fixture
- Monteringsudstyr (skruer, vægdyvler)
- Brugervejledning (dette dokument)
Note: The light bulb (E27) is not included and must be purchased separately.
4. Opsætning og installation
Follow these steps carefully for proper installation. If you are unsure, consult a qualified electrician.
- Forbered til installation:
- Sluk for hovedstrømforsyningen ved afbryderen, før du påbegynder elektrisk arbejde.
- Gather necessary tools: screwdriver, drill, wire strippers, measuring tape, pencil.
- Montering af armaturet:
- Marker det ønskede monteringssted på væggen.
- Use the fixture's base as a template to mark drilling points for the mounting screws.
- Drill holes and insert wall plugs (if required for your wall type).
- Secure the mounting bracket or base of the fixture to the wall using the provided screws. Ensure precise drilling for the support to easily fasten the glass locking screw.
- Ledningsforbindelse:
- Connect the household electrical wires to the fixture's terminals. Typically, this involves connecting Live (L), Neutral (N), and Earth (E) wires. Ensure all connections are secure and insulated.
- Refer to the wiring diagram provided with the fixture (if any) or consult a professional.
- Installer pæren:
- Carefully insert an E27 bulb (max 60W) into the lamp holder. Spænd ikke for meget.
- Secure the Glass/Cover:
- Attach the glass cover or diffuser to the fixture, ensuring it is properly sealed to maintain the IP44 rating.
- Endelig kontrol:
- Once installation is complete, restore power at the circuit breaker and test the light.
Figure 1: The Brilliant AG 96104/11 Tyler Outdoor Wall Light in its off state, showcasing its titanium finish and modern design.
Figure 2: The Brilliant AG 96104/11 Tyler Outdoor Wall Light illuminated, demonstrating its light output and aesthetic when active.
5. Betjeningsvejledning
The Brilliant AG 96104/11 Tyler Outdoor Wall Light operates via a standard external wall switch connected to its electrical supply. Simply toggle the switch to turn the light on or off.
- Pære type: E27
- Maks. Watttage: 60 watt
- Voltage: 230 volt
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din udendørs væglampes lange levetid og optimale ydeevne.
- Rensning: Afbryd strømmen før rengøring. Tør armaturet af med en blød, tør klud.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or glass.
- Udskiftning af pære: Sørg for, at strømmen er slukket, og at pæren er kølet af, før du forsøger at udskifte den. Skru den gamle E27-pære af, og skru en ny i (maks. 60 W).
- Inspektion: Periodically check the fixture for any signs of wear, damage, or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
7. Fejlfinding
If you encounter issues with your outdoor wall light, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tænder ikke | Ingen strømforsyning Defekt pære Løs ledningsforbindelse | Kontroller afbryderen og vægafbryderen. Udskift pæren med en ny. Ensure all wiring connections are secure (consult electrician). |
| Lyse flimrer | Løs pære Inkompatibel pæretype Løse ledninger | Spænd pæren. Ensure bulb is E27 and compatible with the fixture. Check wiring connections (consult electrician). |
| Vand inde i armaturet | Forkert tætning Beskadiget pakning | Ensure glass cover is securely fastened and gasket is intact. If damage is present, replace the fixture or consult a professional. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Strålende |
| Modelnummer | 96104/11 |
| Dimensioner (L x B x H) | 19 x 17 x 7 cm |
| Vægt | 780 gram |
| IP-vurdering | IP44 |
| Materiale | Glas, Metal |
| Farve | Titanium |
| Antal pærer | 1 |
| Max Wattage | 60 watt |
| Voltage | 230 volt |
| Specifikke anvendelser | Udendørs brug |
| Strømkilde | Elektrisk kabel |
| Pære type | Incandescent (E27 Cap Type) |
| Energieffektivitetsklasse | A++>E (depending on bulb used) |
| Oprindelsesland | Frankrig |
9. Garanti og support
For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. Brilliant products are designed for quality and durability.
Reservedele: Oplysninger om tilgængeligheden af reservedele til denne model er i øjeblikket ikke tilgængelige.
If you require further assistance or have questions not covered in this manual, please contact the retailer where you purchased the product or visit the official Brilliant webwebsted for support.
