1. Introduktion
This manual provides detailed instructions for the installation, programming, and operation of your Intermatic HB800RCH 15-AMP 7-Day Outdoor Plugin Digital Timer. This device is designed to automate the control of electrical loads outdoors, offering convenience and energy efficiency through programmable on/off cycles and astronomic features.
2. Sikkerhedsoplysninger
Please read and understand all safety instructions before installing or operating this timer. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the timer is plugged into a grounded outdoor receptacle protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not immerse the timer in water or expose it to direct water spray.
- Overskrid ikke den maksimale elektriske kapacitet på 15 Amps.
- Always unplug the timer from the power source before performing any maintenance or cleaning.
- Hold børn væk fra timeren og tilsluttede enheder.
- Do not use with extension cords that are not rated for outdoor use.
3. Pakkens indhold
Bekræft at alle varer er til stede i pakken:
- Intermatic HB800RCH Digital Timer Unit
- Instruktionsmanual
4. Produktfunktioner
- Outdoor digital timer functionality
- Up to 14 programmable ON/OFF events per week
- 15-Amp capacity for various outdoor applications
- Astronomic feature: automatically adjusts to local sunrise/sunset times
- Two grounded receptacles for connecting devices
- Battery backup for settings retention during power outages
Figur 1: Front view of the Intermatic HB800RCH Digital Timer, showing the digital display, control buttons (OK, MODE, PROG, ON/OFF), and the manual override dial. The timer is gray with a black power cord and plug.
Figur 2: Bund view of the Intermatic HB800RCH Digital Timer, illustrating the two grounded electrical receptacles. These outlets are recessed for weather protection.
5. Opsætning
- Indledende opstart: Plug the timer into a standard 120V AC outdoor GFCI-protected outlet. The display will illuminate.
- Batteriaktivering: The timer includes a battery backup. Ensure it is active to retain settings during power outages. If the display is blank or dim, allow the timer to charge for a few minutes.
- Nulstilling af timeren: If the display shows erratic characters or you wish to clear all previous settings, locate the small recessed reset button (often labeled 'R' or 'RESET') and press it firmly with a non-metallic pointed object (e.g., a pen tip). The display will reset to 12:00 AM.
- Indstilling af aktuel tid og dag:
- Tryk på MODE button until "SET CLOCK" appears.
- Brug OK button to select the hour, then use the rotary dial (or UP/DOWN buttons if present) to adjust the hour. Press OK for at bekræfte.
- Repeat for minutes and AM/PM.
- Brug OK button to select the day of the week, then use the rotary dial to adjust. Press OK for at bekræfte.
- Trykke MODE for at afslutte urindstillingen.
- Setting Current Date (for Astronomic Feature):
- Tryk på MODE button until "SET DATE" appears.
- Brug OK button to select the year, then use the rotary dial to adjust. Press OK for at bekræfte.
- Gentag for måned og dag.
- Trykke MODE to exit date setting.
- Setting Location for Astronomic Feature:
- Tryk på MODE button until "SET LOCATION" appears.
- Use the rotary dial to select your state/region. Press OK.
- Further refine your location if prompted (e.g., North, Central, South within a state). Press OK.
- Trykke MODE to exit location setting.
- Justering af sommertid (DST): The timer is designed to automatically adjust for DST. Verify the setting under the "SET DST" menu option if available, or refer to the specific instructions for your model.
6. Brugsanvisning (programmering)
The HB800RCH timer allows for up to 14 ON/OFF events (7 ON, 7 OFF) per week. Each event can be set for specific days or groups of days.
- Indtastning af programtilstand: Tryk på PROG button. The display will show "PROG 1 ON".
- Setting ON Time:
- With "PROG 1 ON" displayed, press OK. The hour will flash.
- Use the rotary dial to adjust the hour. Press OK.
- Adjust minutes and AM/PM similarly. Press OK.
- Day Selection: The display will show the days of the week. Use the rotary dial to select the desired days for this ON event. Options typically include:
- MO TU WE TH FR SA SU (Every day)
- MO TU WE TH FR (Weekdays)
- SA SU (Weekends)
- Individual days (MO, TU, etc.)
- Setting OFF Time:
- After setting the ON time for PROG 1, the display will automatically advance to "PROG 1 OFF". Press OK.
- Adjust the hour, minutes, AM/PM, and day selection for the OFF event using the same method as the ON time. Ensure the OFF time is appropriate for the ON time.
- Trykke OK for at bekræfte.
- Programming Additional Events: After setting PROG 1 OFF, the display will advance to "PROG 2 ON". Repeat steps 2 and 3 for up to 7 ON/OFF programs.
- Exiting Program Mode: Tryk på MODE button repeatedly until the current time is displayed, or wait for the timer to automatically exit program mode after a period of inactivity.
- Astronomic ON/OFF Events: To use the astronomic feature, select "DAWN" or "DUSK" instead of a specific time when setting an ON or OFF event. The timer will automatically calculate these times based on your set location and date. You can also set an offset (e.g., DUSK + 30 minutes).
- Manuel tilsidesættelse: To temporarily turn the connected devices ON or OFF without affecting the programmed schedule, press the ON/OFF button. The display will indicate "ON" or "OFF" and the timer will revert to the schedule at the next programmed event.
7. Vedligeholdelse
The Intermatic HB800RCH timer requires minimal maintenance.
- Rensning: Tør ydersiden af med en blød, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler. Sørg for, at timeren er taget ud af stikkontakten før rengøring.
- Batteri-sikkerhedskopi: The internal battery is designed to hold settings for an extended period (e.g., 3 months) during power outages. If the timer frequently loses settings after short power interruptions, the battery may need replacement. Refer to the manufacturer's guidelines for battery replacement, or contact customer support.
- Opbevaring: Hvis timeren opbevares i længere tid, skal den sørges for at være ren og tør. Opbevares køligt og tørt.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Timer display is blank or dim. | No power to the unit; internal battery discharged. | Ensure the timer is securely plugged into a live outlet. Allow several minutes for the internal battery to charge. If problem persists, check the GFCI outlet. |
| Timeren tænder/slukker ikke på programmerede tidspunkter. | Incorrect programming; manual override active; power outage; defekt enhed. | Review programming steps carefully. Check if manual override is active (press ON/OFF button). Verify power supply. If settings are lost after power outages, the internal battery may be weak. |
| Vanskeligheder med at programmere timeren. | Complex interface; instructions not followed precisely. | Refer to Section 6: Operating Instructions. Take your time and follow each step. Use the reset button if necessary to start fresh. |
| Astronomic feature not working correctly. | Incorrect date or location set. | Verify the current date and your geographical location settings (state/region) as described in Section 5. |
| Den tilsluttede enhed tænder ikke. | Device not plugged in correctly; device is faulty; timer is not supplying power. | Ensure the device is securely plugged into the timer's receptacle. Test the device by plugging it directly into a wall outlet. Check the timer's manual override and programmed schedule. |
9. Specifikationer
- Model: HB800RCH
- Mærke: Intermatic
- Elektrisk vurdering: 120 VAC, 60 Hz, 15 Amps Resistive, 1800 Watts
- Number of ON/OFF Events: Up to 14 per week (7 ON, 7 OFF)
- Beholdere: 2 jordede stikkontakter
- Materiale: Plast
- Farve: Sort
- Varens vægt: Approximately 1 pound (454 Grams)
- Dimensioner: Cirka 8.1 x 6.9 x 3.8 cm (pakkemål)
- Skærmstørrelse: 2 tommer
- UPC: 078275111400
10. Garanti og support
Garanti: This Intermatic product comes with a Limited Lifetime Warranty. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the official Intermatic webwebsted.
Kundesupport: For technical assistance, troubleshooting, or warranty claims, please contact Intermatic customer support. Contact information can typically be found on the manufacturer's webwebstedet eller på produktemballagen.
Du kan besøge Intermatic-butik på Amazon for mere produktinformation.
