1. Introduktion
This user manual provides essential information for the proper installation, configuration, and maintenance of the Allied Telesis AT-XPSR-Z1 XFP Module. The AT-XPSR-Z1 is a high-performance 10 Gigabit Ethernet (10GbE) XFP transceiver designed for short-reach optical links, specifically supporting 10GBASE-SR standards over multi-mode fiber (MMF) with LC connectors. Adhering to the guidelines in this manual will ensure optimal performance and longevity of your module.
2. Produktet er slutview
The Allied Telesis AT-XPSR-Z1 is an XFP (10 Gigabit Small Form-Factor Pluggable) module engineered to provide 10GbE connectivity for compatible Allied Telesis hardware products equipped with XFP slots. It facilitates high-speed data transmission over multi-mode fiber optic cables, making it suitable for data center interconnects, enterprise networks, and service provider applications requiring reliable short-distance 10GbE links.
Nøglefunktioner omfatter:
- Supports 10GBASE-SR standard.
- Utilizes LC duplex connectors for fiber optic cables.
- Designed for multi-mode fiber (MMF) with a maximum reach of 300 meters.
- Hot-pluggable XFP form factor for easy installation and removal.
This image displays the Allied Telesis AT-XPSR-Z1 XFP Module, a compact, metallic transceiver with two LC ports visible on one end. The module is designed for insertion into compatible network hardware, featuring a silver casing with a blue accent near the connector interface.
3. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | 0564RZ1 (AT-XPSR-Z1) |
| Mærke | Allied Telesis |
| Modultype | XFP Transceiver |
| Datahastighed | 10 Gigabit Ethernet (10GbE) |
| Standard | 10GBASE-SR |
| Connector Type | LC Duplex |
| Fiber type | Multimodefiber (MMF) |
| Max kabelafstand | 300 meter |
| Dimensioner (pakke) | 11.5 x 5 x 3 cm |
| Vægt (produkt) | 12.3 g |
| RAM Capacity (Host System) | 10 GB (as per product specifications) |
4. Opsætning og installation
The AT-XPSR-Z1 XFP module is designed for hot-pluggable installation into compatible Allied Telesis network devices. Follow these steps for proper installation:
- Forberedelse: Ensure the host network device is powered on and stable. Identify an available XFP slot.
- Modulindsættelse: Gently slide the AT-XPSR-Z1 module into the designated XFP slot until it clicks into place. Ensure it is fully seated. Do not force the module.
- Fiberforbindelse: Remove the protective dust caps from the module's LC ports and the fiber optic cable. Connect the appropriate multi-mode fiber (MMF) LC duplex cable to the module's ports. Ensure the transmit (TX) port on the module connects to the receive (RX) port on the remote device, and vice-versa.
- Verifikation: Check the link status indicators on the host device. A stable link light typically indicates a successful connection. Refer to your host device's manual for specific LED interpretations.
- Configuration (if necessary): Depending on your network setup, you may need to configure the corresponding port on the host device via its command-line interface (CLI) or web interface. Consult the host device's documentation for port configuration details.
Forsigtighed: Always handle fiber optic cables and transceivers with care. Avoid touching the optical interfaces. Keep dust caps on when not in use to prevent contamination.
5. Driftsprincipper
Once installed and connected, the AT-XPSR-Z1 XFP module operates as a transparent optical transceiver, converting electrical signals from the host device into optical signals for transmission over fiber optic cable, and vice-versa. It functions at a nominal wavelength suitable for 10GBASE-SR applications over multi-mode fiber.
The module automatically negotiates link parameters with the connected device. Data transmission occurs at 10 Gbps, providing high-bandwidth connectivity for demanding network environments. No user configuration is typically required on the module itself; all operational parameters are managed by the host network device.
6. Vedligeholdelse
The AT-XPSR-Z1 XFP module is designed for reliable, long-term operation with minimal maintenance. However, proper care can extend its lifespan and ensure consistent performance:
- Hold rent: Always keep the optical interfaces clean. Use only approved fiber optic cleaning tools and methods if cleaning is necessary. Dust and contaminants on the optical ports are the most common cause of signal degradation.
- Beskyt porte: When the module is not connected to a fiber cable, always use the provided dust caps to protect the optical ports from dust and debris.
- Håndteres med forsigtighed: Avoid dropping the module or subjecting it to physical shock. Do not bend fiber optic cables beyond their minimum bend radius.
- Miljøforhold: Ensure the module operates within the specified environmental conditions (temperature, humidity) of the host device to prevent damage.
7. Fejlfinding
If you encounter issues with your AT-XPSR-Z1 XFP module, consider the following common troubleshooting steps:
- Ingen linklampe:
- Verify the module is fully seated in the XFP slot.
- Check fiber cable connections at both ends. Ensure TX/RX polarity is correct.
- Inspect fiber optic cables for damage (kinks, sharp bends).
- Clean the optical interfaces of the module and fiber connectors.
- Ensure the remote device is powered on and its corresponding port is active.
- Intermitterende forbindelse:
- Check for dirty or damaged fiber connectors.
- Ensure the fiber cable length does not exceed the 300m maximum for 10GBASE-SR.
- Verify the fiber cable type is multi-mode (MMF).
- Module Not Recognized by Host:
- Remove and re-insert the module firmly.
- Ensure the host device's firmware is up to date and supports the AT-XPSR-Z1 module.
- Try the module in a different XFP slot or a different compatible host device if available.
If these steps do not resolve the issue, please contact Allied Telesis technical support.
8. Garanti og support
The Allied Telesis AT-XPSR-Z1 XFP Module comes with a standard et års garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For detailed warranty terms and conditions, please refer to the official Allied Telesis warranty policy documentation or contact Allied Telesis customer service.
For technical assistance, product inquiries, or warranty claims, please visit the official Allied Telesis website or contact their authorized support channels. When contacting support, please have your product model number (AT-XPSR-Z1 or 0564RZ1) and purchase information readily available.
