Indledning
The Fluidmaster 5403 3-Inch Universal Water Saving Long Life Toilet Flapper is designed to provide an efficient and long-lasting solution for toilet repair. Fluidmaster, a leading brand in toilet repair since 1957, is committed to offering easy-to-install products that ensure optimal performance and water conservation. This flapper is engineered to fit a wide range of 3-inch flush valve toilets, offering durability with its silicone seal and solid frame design.
Opsætning og installation
Før du begynder
- Ensure the toilet water supply is turned off at the wall valve.
- Flush the toilet to empty the tank completely.
Installationstrin
- Remove Old Flapper: Carefully unhook the old flapper from the flush valve ears and detach its chain from the flush lever. Dispose of the old flapper responsibly.

Diagram showing the internal components of a toilet tank, including the flapper and fill valve.
- Install New Flapper: Take the new Fluidmaster 5403 flapper. Push the clips on the flapper onto the flush valve ears until they securely snap into place.

The Fluidmaster 5403 3-Inch Universal Water Saving Long Life Toilet Flapper, ready for installation. Note the adjustable arms and silicone seal.
- Attach Chain: Attach the flapper chain to the flush lever. Ensure there is approximately 1/2 inch of slack in the chain when the flapper is closed. Too much slack can prevent a full flush, while too little can cause the flapper to not seal properly.
- Adjust Water Saving Settings (Optional): The Fluidmaster 5403 features an adjustable cone with settings from 0 to 10. A higher number allows more water per flush, while a lower number saves water. Refer to the "Operating Instructions" section for detailed adjustment.

Flapper settings table showing recommended settings and chain lengths for various toilet brands and models to optimize water usage.
- Genopret vandforsyningen: Turn the water supply back on to fill the tank. Check for any leaks around the flapper or connections.
For a detailed visual guide, please refer to the official Installationsmanual (PDF).
This video demonstrates the complete installation process of the Fluidmaster 5403 flapper, including removal of the old flapper, attachment of the new flapper, and adjustment of the chain and water-saving settings.
Betjeningsvejledning
Adjusting Water Saving Settings
The Fluidmaster 5403 flapper allows you to customize the amount of water used per flush, helping to save water and reduce your water bill.
To adjust the water volume:
- Locate the adjustable cone on the underside of the flapper.
- Rotate the cone to select a setting from 0 to 10. A setting of '0' (or lower numbers) means less water is flushed, while '10' (or higher numbers) means more water is flushed.
- Test the flush after each adjustment to ensure proper performance. If the toilet does not flush properly (e.g., weak flush), increase the setting by one.
Consult the "Flapper Settings" table in the installation section or on the product packaging for recommended settings based on your toilet's brand and model.
Opretholdelse
Regular inspection of your Fluidmaster 5403 flapper can help prevent future issues and ensure continued water efficiency.
- Tjek for lækager: Periodically check for "phantom flushes" (toilet refilling itself without being flushed), which indicates a slow leak. This is often caused by a worn or improperly seated flapper.
- Ren: If mineral deposits build up on the flapper or flush valve seat, gently clean them with a non-abrasive cleaner. Avoid harsh chemicals that can damage rubber components.
- Inspect Silicone Seal: The durable silicone seal is designed for long life and chlorine resistance. However, inspect it annually for any signs of wear, cracking, or deterioration. Replace the flapper if significant wear is observed.
For more in-depth maintenance tips, refer to the Fejlfindingsvejledning (PDF).
Fejlfinding
Almindelige problemer og løsninger
- Toilet Runs Constantly:
- Årsag: Flapper not sealing properly, chain too short, or debris on the flush valve seat.
- Løsning: Ensure the chain has 1/2 inch of slack. Clean the flush valve seat and the flapper's silicone seal. Adjust the water-saving setting if it's too low for your toilet.
- Svag flush:
- Årsag: Water-saving setting too low, or insufficient water in the tank.
- Løsning: Increase the water-saving setting on the flapper. Ensure the fill valve is filling the tank to the correct water line.
For additional troubleshooting steps and solutions, please consult the Fejlfindingsvejledning (PDF).
Specifikationer
| Attribut | Værdi |
|---|---|
| Materiale | Gummi |
| Mærke | Fluidmaster |
| Varemål L x B x H | 5.25 x 9 x 3.25 tommer |
| Udvendig finish | Rød |
| Indløbstilslutningsstørrelse | 3 tommer |
| Indløbsforbindelsestype | 3-inch flush valve |
| Udgangstilslutningstype | 3-inch connection |
| Antal havne | 2 |
| Størrelse til stikkontakt | 3 tommer |
| Ventil type | standard |
| Global Trade Identification Number | 00039961015433 |
| Fabrikant | Fluidmaster |
| UPC | 039961015433 |
| Varenummer | 5403 |
| Varens vægt | 2.39 ounce |
| Produktdimensioner | 5.25 x 9 x 3.25 tommer |
| Oprindelsesland | Kina |
| Varemodelnummer | 5403P4 |
| Er udgået af producenten | Ingen |
| Størrelse | 3 tommer |
| Farve | Rød |
| Stil | Toiletklap |
| Form | form |
| Vare Pakke Antal | 1 |
| Antal håndtag | 1 |
| Særlige funktioner | Justerbar |
| Inkluderede komponenter | Fluidmaster 5403 3-Inch Universal Water Saving Long Life Toilet Flapper |
| Batterier inkluderet? | Ingen |
| Batterier påkrævet? | Ingen |
| Garantibeskrivelse | Livstid |
Garanti & Support
Garanti: The Fluidmaster 5403 3-Inch Universal Water Saving Long Life Toilet Flapper comes with a Lifetime warranty, ensuring long-term reliability and peace of mind.
Fabrikant: Fluidmaster
For product support, technical assistance, or warranty claims, please visit the official Fluidmaster webwebstedet eller kontakt deres kundeservice direkte. Kontaktoplysninger kan typisk findes på produktemballagen eller deres officielle webwebsted.





