Thule Omnistor Markisestøtte Brugermanual

1. Introduktion

Thank you for choosing the Thule Omnistor Awning Support. This manual provides essential information for the safe and effective use of your product. This support is designed to provide stable and reliable support for your Omnistor awning, ensuring its proper function and longevity. It features a durable plastic construction, designed for easy installation and manual operation.

Læs venligst denne manual grundigt inden installation og brug, og gem den til senere brug.

2. Sikkerhedsoplysninger

Always prioritize safety when installing and using the awning support. Failure to follow these instructions could result in injury or damage to the product or awning.

Ensure the awning support is securely attached to both the awning and the ground/mounting surface before applying any load.
Do not exceed the maximum recommended load for your awning system.
Regularly inspect the support for any signs of wear, damage, or loose connections. Replace damaged parts immediately.
Keep children and pets away from the awning area during installation and operation.
Avoid using the awning in strong winds or heavy rain, even with the support in place, unless the awning is specifically designed for such conditions. Retract the awning in adverse weather.
Ensure a minimum clearance of 2 meters is available for proper setup and operation of the awning with the support.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede og ubeskadigede, før du fortsætter installationen. Pakken skal indeholde:

Thule Omnistor Awning Support (Quantity: 2 pieces, as typically supplied for a pair)

Figure 3.1: Two Thule Omnistor Awning Support units, typically included in a set.

4. Opsætning og installation

The Thule Omnistor Awning Support is designed for straightforward assembly and installation, requiring no special tools. Follow these steps for proper setup:

Prepare the Awning: Fully extend your Thule Omnistor awning to its desired position. Ensure the area beneath the awning is clear and provides the minimum required clearance of 2 meters.
Identificér tilknytningspunkter: Locate the designated attachment points on your awning's lead rail or support arms where the Thule Omnistor Awning Support will connect. These are typically slots or channels designed to receive the support.
Insert the Support: Gently slide the top end of the awning support into the corresponding slot or channel on the awning. Ensure it clicks or locks securely into place. The design allows for easy insertion and removal.
Placer basen: Once the top is secured, position the base of the support on a stable, level surface. If applicable, use the pre-drilled holes in the support base to secure it to the ground or a mounting plate using appropriate fasteners (fasteners not included).
Adjust and Verify: Ensure the awning support is vertical and provides adequate tension to the awning. Verify that both supports (if using a pair) are evenly positioned and securely attached.

Side view of two Thule Omnistor Awning Supports

Figur 4.1: Side view of the awning supports, showing the channel design for attachment.

5. Betjeningsvejledning

The Thule Omnistor Awning Support operates manually and does not require any electrical power.

Implementering: After extending your awning, attach the supports as described in the "Setup and Installation" section. Ensure they are firmly in place before leaving the awning unattended.
Tilbagetrækning: Before retracting your awning, always detach the Thule Omnistor Awning Supports. Gently pull the support out of its attachment point on the awning. Store the supports in a safe place to prevent damage.
Stabilitet: The supports are designed to enhance the stability of your awning, especially in light to moderate conditions. They are not intended to make the awning resistant to severe weather.

6. Vedligeholdelse

Regular maintenance will ensure the longevity and optimal performance of your Thule Omnistor Awning Support.

Rensning: Clean the plastic supports periodically with mild soap and water. Avoid abrasive cleaners or solvents that could damage the material.
Inspektion: Before each use, inspect the supports for any cracks, deformities, or signs of wear. Check the attachment points for any damage.
Opbevaring: When not in use, store the supports in a dry, cool place, away from direct sunlight and extreme temperatures, to prevent material degradation.

7. Fejlfinding

If you encounter issues with your Thule Omnistor Awning Support, refer to the following common problems and solutions:

Problem	Mulig årsag	Løsning
Support does not fit into awning channel.	Incorrect orientation or incompatible awning model.	Ensure the support is oriented correctly. Verify your awning model is compatible with Thule Omnistor accessories.
Awning feels unstable even with supports.	Supports not fully engaged, uneven ground, or severe weather conditions.	Ensure supports are fully clicked into place. Position on level ground. Retract awning in strong winds or heavy rain.
Support appears damaged or cracked.	Impact, excessive force, or material fatigue.	Discontinue use immediately. Replace the damaged support with a genuine Thule Omnistor replacement part.

8. Specifikationer

Mærke: Thule
Modelnummer: 1500601212
ASIN: B002BW460U
Materiale: Durable Plastic (as per product description and images)
Driftstilstand: Manuel
Montering påkrævet: Ja
Pakkedimensioner: 13.2 x 12.2 x 2.6 cm
Pakkevægt: 70 g
Minimum Clearance Required: 2 meter
Oprindelsesland: Tyskland

9. Garanti og support

For detailed warranty information, please refer to the official Thule website or the warranty card included with your purchase. Thule products are known for their quality and are backed by comprehensive support.

If you require technical assistance, replacement parts, or have questions not covered in this manual, please contact Thule customer service or visit their official webwebsted:

Visit the Thule Store on Amazon

Figure 9.1: Thule brand logo.

	Thule Omnistor 5200 markise: Funktioner, specifikationer og tilbehør Omfattende guide til Thule Omnistor 5200 markisen med detaljerede oplysninger om dens funktioner, installationsmuligheder, vedligeholdelse og tilgængeligt tilbehør. Indeholder specifikationer for forskellige størrelser og stofmuligheder.
	Thule Markisetelte - Omfattende guide og montering En detaljeret guide til Thule markistetelte, inklusive monteringsoplysninger, specifikationer, funktioner og installationsvejledning til forskellige modeller som Thule Panorama, Thule Residence G3, Thule Veduta og Thule QuickFit.
	Thule Omnistor 6300 markise installations- og sikkerhedsinstruktioner Omfattende installations-, sikkerheds- og garantivejledning til Thule Omnistor 6300-markisen, med trinvise instruktioner og vigtige brugsoplysninger til fritidskøretøjer.
	Thule Produktguide - Tilbehør til varevogne og minivans 2020 Udforsk Thules produktguide for 2020 til tilbehør til varevogne og minivans, der byder på innovative tagbøjlesystemer, alsidige markiser, smarte opbevaringsløsninger og specialiserede holdere til cykler, vandsport og vintersportsudstyr. Opdag produkter af høj kvalitet, der er sikre og brugervenlige, og som er designet til at forbedre din aktive udendørslivsstil og forenkle transporten af alt dit vigtige udstyr.
	Thule Omnistor Regal markise: Installations- og betjeningsmanual Omfattende guide til Thule Omnistor Regal-markisen, der dækker installation, betjening, sikkerhedsretningslinjer og vedligeholdelse. Lær, hvordan du trækker markisen ud, trækker den ind og justerer den for optimal brug.
	Thule Adapter til Brandrup Top-Rail Installationsvejledning Omfattende monteringsvejledning til Thule Adapter til Brandrup Top-Rail, designet til Thule Omnistor 2000, 4900 og 5200 markiser på campervaner med Brandrup monteringsskinner.

Thule 1500601212