HamiltonBuhl KB510 Klassisk Basunstativ Brugsanvisning

Indledning

This manual provides essential information for the proper setup, operation, and maintenance of your HamiltonBuhl KB510 Classic Trombone Stand. Please read these instructions carefully to ensure optimal performance and longevity of your product.

Image: The HamiltonBuhl KB510 Classic Trombone Stand, featuring a chrome finish, a rubber bell cup, and a stable tripod base.

Produktegenskaber

• Holdbar konstruktion: Features bright chrome plating for maximum durability.
• Instrumentbeskyttelse: Equipped with a rubber bell cup to cushion instruments and prevent damage.
• Stabilt design: Lightweight channel design for legs ensures stand stability.
• Kompakt opbevaring: Folds to a compact 12 inches for easy transport and storage.
• Alsidig brug: Designed primarily for trombones, but also suitable for Bb and C trumpets and cornets.

Opsætningsinstruktioner

1. Fold benene ud: Gently pull the three legs outwards from the central column until they are fully extended and locked into position, forming a stable tripod base. Ensure all legs are evenly spread for maximum stability.
2. Juster højden: Loosen the adjustment knob located on the main shaft. Extend the upper shaft to the desired height. Tighten the knob securely to lock the shaft in place.
3. Position Bell Cup: Ensure the rubber bell cup is firmly seated on the upper shaft. This cup provides cushioning for your instrument's bell.
4. Bekræft stabilitet: Before placing an instrument, gently test the stand's stability on a flat surface.

Betjeningsvejledning

1. Placering: Carefully place the bell of your trombone (or other compatible instrument) into the rubber bell cup.
2. Balance: Ensure the instrument is balanced on the stand. The stand is designed to hold the instrument securely, but proper placement is crucial to prevent tipping.
3. Fjernelse: When removing the instrument, lift it straight up from the bell cup. Avoid pulling or twisting forcefully.

Opretholdelse

• Rensning: Wipe the chrome-plated surfaces with a soft, dry cloth to remove dust and fingerprints. For stubborn marks, a damp en klud med mild sæbe kan bruges, efterfulgt af grundig tørring.
• Gummikomponenter: Periodically inspect the rubber bell cup and leg caps for wear or damage. Replace if necessary to maintain instrument protection and stand stability.
• Led og knapper: Ensure all adjustment knobs are functioning smoothly and securely. Do not overtighten. If joints become stiff, a small amount of silicone lubricant can be applied.
• Opbevaring: When not in use, fold the stand to its compact size and store it in a dry environment to prevent corrosion.

Fejlfinding

• Stående ustabilitet: Ensure all three legs are fully extended and evenly spread. Verify that the stand is placed on a flat, level surface. Check that the instrument is properly balanced in the bell cup.
• Vanskeligheder med at justere højden: Loosen the adjustment knob completely. If the shaft is stiff, apply a small amount of silicone lubricant to the inner shaft and work it up and down. Ensure no debris is obstructing the mechanism.
• Bell Cup Issues: If the rubber bell cup is loose or damaged, it may need to be re-seated or replaced to ensure proper instrument cushioning.

Specifikationer

Garanti og support

For information regarding warranty coverage or to seek technical support, please visit the official HamiltonBuhl website or contact their customer service department. You can find more information by visiting the HamiltonBuhl Store.