Koblenz B-1500-P High Speed ​​Gulvpoleringsmaskine Brugsanvisning

1. Sikkerhedsoplysninger

Always read and understand all safety warnings and instructions before operating the Koblenz B-1500-P Floor Burnisher. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Elektrisk sikkerhed: Sørg for, at netledningen er i god stand og tilsluttet en jordet stikkontakt. Brug ikke apparatet i våde omgivelser eller i nærheden af ​​stillestående vand.
• Personligt beskyttelsesudstyr (PPE): Wear appropriate safety glasses and non-slip footwear during operation.
• Driftsområde: Keep the work area clear of obstructions and other personnel. Ensure adequate ventilation.
• Maskinens stabilitet: Always maintain a firm grip on the handle during operation. Do not leave the machine unattended while powered on.
• Afbryder: The unit is equipped with a handle-mounted circuit breaker for overload protection. If the machine stops unexpectedly, check and reset the circuit breaker.

2. Produktet er slutview

The Koblenz B-1500-P is a high-speed floor burnisher designed for efficient floor polishing. It features a robust motor and durable construction for reliable performance.

Figur 2.1: Forside view of the Koblenz B-1500-P High-Speed Floor Burnisher.

Figure 2.2: Key components of the Koblenz B-1500-P, including the 2-piece chromed handle, 50' long power cord, 1.5 HP AC twin capacitor motor, cast aluminum chassis, and epoxy powder-coated steel shroud.

3. Opsætning og montering

Follow these steps to prepare your burnisher for operation.

3.1 Montering af håndtag

1. Pak alle komponenter ud, og sørg for, at alle dele er til stede.
2. Connect the two pieces of the 1¼" diameter chromed steel handle. Secure them firmly using the provided fasteners.
3. Attach the assembled handle to the main body of the burnisher, ensuring it is securely locked into position.

3.2 Pad Attachment

The burnisher uses a 20-inch floor cleaner pad. Ensure the correct pad type is selected for your specific floor surface and desired finish.

1. Tilt the machine back to expose the pad driver.
2. Center the 20-inch pad onto the pad driver. Ensure it is flat and securely attached.
3. Gently lower the machine back to its operating position.

3.3 Strømtilslutning

Connect the 50-foot, 3-wire grounded power cord (14-gauge) to a suitable grounded electrical outlet. Ensure the outlet matches the voltage krav til maskinen.

4. Betjeningsvejledning

Korrekt drift sikrer optimal ydeevne og sikkerhed.

4.1 Start af maskinen

1. Ensure the machine is fully assembled and the pad is correctly attached.
2. Sæt netledningen i en jordet stikkontakt.
3. Grib godt fast i håndtaget med begge hænder.
4. Engage the power switch, typically located on the handle, to start the motor. The 1.5 HP AC twin capacitor motor will begin rotating the pad.

4.2 Maneuvering and Polishing

The burnisher is designed for smooth operation across various floor types.

• Bevægelse: The four 5-inch non-marking wheels allow for effortless maneuverability. Guide the machine in overlapping passes to ensure even coverage.
• Overfladetilpasning: The flexible pad driver helps the machine adapt to different surfaces, providing consistent polishing results.
• Jævn finish: The DC rectified motor delivers smooth and consistent power, contributing to an even and professional polish.

Figure 4.1: The Koblenz B-1500-P in operation, demonstrating its polishing capability.

Figure 4.2: The 5-inch non-marking wheels ensure smooth movement without damaging delicate floor surfaces.

5. Vedligeholdelse

Regular maintenance ensures the longevity and optimal performance of your burnisher.

5.1 Rengøring af maskinen

After each use, disconnect the power and clean the machine. Wipe down the exterior with a damp cloth. Remove and clean the polishing pad according to its specific care instructions.

5.2 Pad and Brush Care

Inspect pads and brushes regularly for wear and tear. Replace worn pads to maintain effective polishing. Clean brushes thoroughly after use to prevent buildup.

5.3 Strømafbryder

The handle-mounted circuit breaker protects the motor from overload. If the circuit breaker trips, disconnect the power, allow the motor to cool, and then press the reset button on the handle before resuming operation.

6. Fejlfinding

Se dette afsnit for almindelige problemer og deres løsninger.

• Maskinen starter ikke:
  • Kontroller, om netledningen er tilsluttet korrekt til en jordet stikkontakt.
  • Verify the outlet has power.
  • Check the handle-mounted circuit breaker and reset if tripped.
• Uneven polishing results:
  • Ensure the polishing pad is clean and evenly attached to the pad driver.
  • Make sure you are using the correct type of pad for the floor surface.
  • Apply even pressure and use overlapping passes during operation.
• Machine is difficult to maneuver:
  • Check the non-marking wheels for any obstructions or damage.
  • Ensure the handle is adjusted to a comfortable height for proper leverage.

7. Specifikationer

8. Garanti og support

For warranty information and customer support, please refer to the documentation included with your product or visit the official Koblenz webwebsted. Gem din købskvittering for garantikrav.

Kundesupport: For technical assistance or service inquiries, please contact Koblenz customer support through their official channels.