1. Introduktion
This manual provides detailed instructions for the safe and effective use of your Rokinon D980AFZ-C Digital TTL Power Zoom Flash. Designed for Canon cameras, this flash unit offers advanced features to enhance your photography.
Nøglefunktioner:
- Guide Number of 45m / 148ft for powerful illumination.
- Full automatic TTL operation for precise exposure control.
- Power Zoom function to match lens focal length.
- Bounce and Swivel Head for flexible light direction.
- Integrated Diffuser and Reflector Panel for softer light.
- Wireless Slave Flash capability for off-camera lighting.
2. Sikkerhedsoplysninger
Please read and understand all safety precautions before using the flash unit to prevent injury or damage to the product.
- Du må ikke selv skille blitzenheden ad eller forsøge at reparere den. Overlad al service til kvalificeret personale.
- Keep the flash unit away from water and moisture. Do not operate with wet hands.
- Undgå direkte eksponering for blitzen i øjnene, især på tæt hold, da det kan forårsage midlertidig synsnedsættelse.
- Use only recommended batteries. Do not mix old and new batteries, or different types of batteries.
- Remove batteries if the flash unit will not be used for an extended period to prevent leakage.
- Opbevares utilgængeligt for børn.
3. Pakkens indhold
Bekræft at alle varer er til stede i din pakke:
- Rokinon D980AFZ-C Digital TTL Power Zoom Flash Unit
- Mini stativ
- Beskyttende pose
- Instruktionsmanual (dette dokument)
4. Produktdiagram

Figur 4.1: Forside View of Flash Unit. This image displays the Rokinon D980AFZ-C flash unit from the front, showing the flash head with its integrated diffuser panel extended upwards. The Rokinon Digital logo is visible on the main body of the flash. The hot shoe mount is at the bottom.

Figur 4.2: Bagside View of Flash Unit. This image shows the back of the Rokinon D980AFZ-C flash unit, highlighting the LCD control panel. Below the LCD, various buttons are visible, including MODE, ISO, F/STOP, ZOOM, and LIGHT. Toggle switches for READY/TEST, OFF/ON, and AUTO OK/S (Slave) are also present.
5. Opsætning
5.1 Batteriinstallation
- Locate the battery compartment door on the side or back of the flash unit.
- Slide or open the battery compartment door.
- Insert four (4) AA-size batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Luk batteridækslet ordentligt.
5.2 Tilslutning til kamera
- Ensure both the camera and flash unit are powered off.
- Skub flashenhedens monteringsfod ind i kameraets blitzsko.
- Tighten the locking mechanism (if present) on the flash unit to secure it to the hot shoe. Do not overtighten.
6. Betjeningsvejledning
6.1 Tænd/sluk
To power on the flash, slide the OFF/ON skifte til ON position. The LCD panel will illuminate, and the READY indicator will light up when the flash is charged.
6.2 TTL Automatic Operation
In TTL (Through-The-Lens) mode, the flash automatically adjusts its output based on the camera's metering system, providing optimal exposure. Ensure your camera is set to a compatible flash mode.
6.3 Power Zoom Function
The flash head automatically adjusts its zoom position to match the focal length of your camera lens, optimizing light coverage. Manual zoom adjustment may also be available via the ZOOM knappen på kontrolpanelet.
6.4 Bounce and Swivel Head
The flash head can be tilted upwards and rotated horizontally to bounce light off ceilings or walls. This technique creates softer, more natural-looking illumination by diffusing the light source.
- To tilt: Gently push the flash head upwards or downwards.
- To swivel: Rotate the flash head left or right.
6.5 Built-In Diffuser and Reflector Panel
Pull out the wide-angle diffuser panel and the reflector card from the flash head. The diffuser helps spread light for wider coverage, while the reflector card can add a catchlight to subjects' eyes when bouncing the flash.
6.6 Wireless Slave Flash Capability
The D980AFZ-C can function as a wireless slave unit. Set the AUTO OK/S skifte til S (Slave) mode. The flash will then fire in sync with another master flash unit, allowing for creative off-camera lighting setups.
7. Vedligeholdelse
- Rensning: Use a soft, dry cloth to clean the flash unit. For stubborn dirt, lightly dampRengør kluden med vand. Brug ikke opløsningsmidler eller slibende rengøringsmidler.
- Opbevaring: Store the flash unit in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Håndtering: Avoid dropping or subjecting the flash unit to strong impacts.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Blitzen går ikke ud. | Low or dead batteries; incorrect camera settings; flash not securely mounted. | Replace batteries; check camera flash mode; ensure flash is firmly attached to hot shoe. |
| Flash fires but image is too dark/bright. | Incorrect exposure compensation; flash not in TTL mode; subject too far/close. | Adjust flash exposure compensation; confirm TTL mode; check shooting distance. |
| Slave mode not working. | Slave switch not set to 'S'; master flash not firing; interference. | Set switch to 'S'; ensure master flash is firing correctly; reduce distance to master flash. |
| LCD-skærmen er tom. | Flash is off; batteries are dead or incorrectly inserted. | Turn flash on; check and replace batteries. |
9. Specifikationer
| Modelnummer | D980AFZ-C |
| Mærke | Rokinon |
| Kompatible monteringer | Canon |
| Vejledende nummer | 45m / 148ft |
| Flash-synkroniseringshastighed | 1/250 sekund |
| Flash Type | Shoe Mount, TTL, Power Zoom, Slave |
| Strømkilde | 4x AA batterier (medfølger ikke) |
| Produktdimensioner | 2 x 2.5 x 6.5 tommer |
| Varens vægt | 9.6 ounce |
| Farve | Sort |
10. Garanti og support
For warranty information or technical support, please refer to the warranty card included with your product or visit the official Rokinon website. Contact details for customer service can typically be found on the manufacturer's support page.
Rokinon Official Webwebsted: www.rokinon.com





