1. Introduktion
The Trimble Recon is a rugged handheld computer designed for outdoor and demanding environments. It features a 200MHz processor, 64MB RAM, 128MB Flash Memory, and a 4000 mAh battery, all operating on Microsoft Windows Mobile 6. Its sunlight-readable VGA display ensures visibility in various lighting conditions. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Trimble Recon device.
Figure 1: Trimble Recon Handheld Computers. This image displays five Trimble Recon devices, showcasing their robust design and form factor, suitable for field use.
2. Opsætningsvejledning
2.1 Udpakning og første inspektion
Upon receiving your Trimble Recon, carefully unpack all components and inspect for any signs of damage. The complete factory kit includes:
- Trimble Recon PDA unit
- Genopladeligt batteri
- USB kabel
- Strømkabel (vekselstrømsadapter)
- Håndstrop
- Software CD
- Various Accessories/Adapters
- Startguide
2.2 Batteriinstallation og opladning
- Sørg for, at enheden er slukket, før du installerer batteriet.
- Find batterirummet på bagsiden af enheden.
- Isæt 4000 mAh-batteriet, og sørg for, at kontakterne er korrekt justeret.
- Fastgør batterirummets dæksel.
- Connect the power cable to the device and plug the AC adapter into a power outlet.
- Allow the device to charge fully before first use. A full charge typically takes several hours.
2.3 Tænd/sluk
- For at tænde: Press and hold the power button (usually marked with a circle and a vertical line) until the screen illuminates.
- For at slukke: Press and hold the power button until the power-off options appear on the screen, then select "Power Off" or "Shut Down". Alternatively, a quick press may put the device into sleep mode.
3. Betjeningsvejledning
3.1 Navigating Windows Mobile 6
The Trimble Recon operates on Microsoft Windows Mobile 6. Navigation is primarily done via the touchscreen using the included stylus or your finger, and through the physical navigation buttons.
- Brug af stylus: Tap the screen to select items, double-tap to open applications, and drag to scroll.
- Navigationsplade: Use the directional pad (up, down, left, right) to move through menus and options.
- OK/Enter-knap: Bekræfter valg.
- Softkeys: The buttons directly below the screen often correspond to on-screen labels for specific functions.
3.2 Connecting to a Computer (Syncing Data)
To transfer data between your Trimble Recon and a computer, use the provided USB cable.
- Install the necessary synchronization software (e.g., Microsoft ActiveSync for Windows XP/2000 or Windows Mobile Device Center for Windows Vista/7/8/10) from the included CD or Trimble's official webwebsted på din computer.
- Connect one end of the USB cable to the Trimble Recon and the other end to an available USB port on your computer.
- The synchronization software should automatically detect the device and initiate a partnership or allow for file gennemsyn.
3.3 Brug af applikationer
The Trimble Recon comes pre-loaded with standard Windows Mobile applications. Additional applications can be installed as needed.
- Access applications via the "Start" menu (usually located at the top-left of the screen).
- Tap on an application icon to launch it.
- Refer to specific application documentation for detailed usage instructions.
4. Vedligeholdelse
4.1 Rengøring af enheden
- Brug en blød, fnugfri klud lidt dampened with water or a mild, non-abrasive cleaning solution to clean the screen and casing.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the device's display or finish.
- Ensure all ports are free of dust and debris. Use compressed air if necessary, but do so carefully.
4.2 Pleje af batterier
- For at maksimere batteriets levetid bør du undgå at aflade batteriet helt ofte.
- Opbevar enheden et køligt og tørt sted, når den ikke er i brug i længere perioder.
- If storing for a long time, charge the battery to approximately 50% before storage.
4.3 Softwareopdateringer
Periodically check Trimble's official website for any available software or firmware updates for your Recon device. Keeping the software updated can improve performance and address potential issues.
5. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Low or depleted battery; battery not properly seated. | Charge the battery fully. Ensure the battery is correctly installed. |
| Skærmen reagerer ikke. | Software glitch; screen calibration issue. | Perform a soft reset (refer to starter guide for specific button combination). Recalibrate the screen if the issue persists after reset. |
| Kan ikke oprette forbindelse til computer. | Incorrect USB cable; driver issues; synchronization software not running. | Ensure you are using the correct USB cable. Reinstall synchronization software and drivers on your computer. Check USB port functionality. |
| Device runs slowly or freezes. | Too many applications running; low memory; software conflict. | Close unnecessary applications. Perform a soft reset. If issues persist, consider a hard reset (data will be lost, back up first). |
6. Specifikationer
| Feature | Detalje |
|---|---|
| Processor | 200 MHz |
| VÆDDER | 64 MB |
| Flash-hukommelse | 128 MB |
| Operativsystem | Microsoft Windows Mobile 6 |
| Vise | Sunlight Readable VGA Display |
| Batteri | 4000 mAh |
| Farve | Gul |
| Modelnummer | RES-VY2BMX-00 |
7. Garanti og support
The Trimble Recon comes with a full manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Trimble webwebsted.
For technical support, software updates, or additional resources, please visit the official Trimble support portal or contact their customer service. Keep your product's model number (RES-VY2BMX-00) and serial number ready when seeking support.
Official Trimble Webwebsted: www.trimble.com
