Indledning
This manual provides detailed instructions for the installation, operation, and maintenance of your Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet. Please read all instructions carefully before beginning installation to ensure proper function and longevity of your product. This faucet features a classic design with an oil rubbed bronze finish, designed for deck mount, three-hole installations.
Image: The Kingston Brass KB3605BL Vintage 4-Inch Centerset Lavatory Faucet in Oil Rubbed Bronze.
Sikkerhedsoplysninger
- Sluk altid for hovedvandforsyningen, før du installerer eller udfører vedligeholdelse på vandhanen.
- Brug passende personlige værnemidler, såsom sikkerhedsbriller, under installationen.
- Hvis du er usikker på nogen del af installationsprocessen, skal du kontakte en kvalificeret VVS-installatør.
- Sørg for, at alle forbindelser er sikre for at forhindre lækager.
Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- Lavatory Faucet Assembly
- Monteringshardware
- Matching Pop-Up Drain Assembly
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | KB3605BL |
| Finish Type | Olie gnidet bronze |
| Materiale | Messing |
| Monteringstype | Dækmontering |
| Installationstype | Centersæt |
| Hulantal | 3 |
| Antal håndtag | 2 |
| Tud rækkevidde | 4 tommer |
| Tudhøjde | 3.5 tommer |
| Tudafstand | 2 tommer |
| Maksimal flowhastighed | 1.8 Gallons Per Minute (6.8 Liters Per Minute) |
| Patrontype | Dura Seal Washerless |
| Speciel funktion | Pop Up Drain Included |
Image: Dimensional drawing providing precise measurements for installation.
Opsætning og installation
This faucet is designed for a 4-inch centerset, three-hole deck mount installation. Follow these general steps:
- Klargør vasken: Ensure the sink deck is clean and free of debris. The faucet requires three holes, typically 4 inches apart (centerset).
- Installer vandhanehuset: Place the faucet body onto the sink holes. Secure it from underneath the sink using the provided mounting hardware (washers and nuts). Tighten securely but do not overtighten.
- Tilslut vandforsyningsledninger: Attach the hot and cold water supply lines to the faucet's inlets. Use thread sealant tape on the threaded connections and tighten with a wrench. Connect the other ends to your home's hot and cold water supply valves.
- Install the Pop-Up Drain: Insert the drain body into the sink's drain hole. Apply plumber's putty or silicone sealant around the flange to create a watertight seal. Secure the drain body from underneath with the washer and nut.
- Connect the Pop-Up Rod: Assemble the pop-up rod mechanism according to the diagram. Connect the horizontal pivot rod to the vertical pop-up rod using the clevis strap and screw. Ensure smooth operation of the drain stopper.
- Test for lækager: Once all connections are made, slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, tighten the connections as necessary.
Image: Diagram showing the pop-up drain assembly, including the pivot rod, clevis screw, clevis strap, plunger, and pop-up rod.
Operation
The Kingston Brass KB3605BL faucet features two handles for controlling water flow and temperature:
- Koldt vand: The right handle controls the cold water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Varmt vand: The left handle controls the hot water supply. Turn it counter-clockwise for ON and clockwise for OFF.
- Temperaturkontrol: Adjust the hot and cold handles simultaneously to achieve the desired water temperature.
- Flowhastighed: The faucet delivers a maximum flow rate of 1.8 gallons per minute (GPM) at 60 PSI.
- Pop-Up Drain: Lift the small rod located behind the faucet spout to close the drain stopper. Push it down to open the drain.
Opretholdelse
Proper care will maintain the finish and performance of your faucet:
- Rensning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or polishes that can damage the finish.
- Vedligeholdelse af belufter: If water flow decreases or becomes irregular, the aerator may be clogged. Unscrew the aerator from the spout, clean any debris, and rinse thoroughly before reattaching.
- Forebyggelse af lækage: The faucet uses a drip-free washerless cartridge system. If a leak occurs from the handles, the cartridge may need to be inspected or replaced.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lav vandgennemstrømning | Clogged aerator; partially closed supply valves. | Clean aerator; ensure supply valves are fully open. |
| Vandhane lækker fra tud | Slidt patron. | Udskift patronen. |
| Leaks from Handle Base | Loose packing nut; worn O-rings or cartridge. | Tighten packing nut; replace O-rings or cartridge. |
| Problemer med vandtemperaturen | Incorrect supply line connections; water heater issues. | Verify hot/cold connections; check water heater. |
Garantioplysninger
Kingston Brass products come with a generous product warranty. For specific details regarding your faucet's warranty coverage, please refer to the warranty documentation included with your purchase or visit the official Kingston Brass webwebsted.
Støtte
If you require further assistance or have questions not covered in this manual, please contact Kingston Brass customer support. You can typically find contact information on the manufacturer's webwebstedet eller på produktemballagen.
For mere information, besøg Kingston Brass Store.
