Indledning
The STI 6405 Exit Stopper is a highly effective multi-function door alarm designed to deter unauthorized exits and entries through emergency doors. This device provides an immediate, loud alarm when activated, drawing attention to the door. It features a momentary reset option for convenience. This manual provides detailed instructions for the installation, operation, and maintenance of your STI 6405 Exit Stopper.
Sikkerhedsoplysninger
ADVARSEL:
- Ensure proper installation to prevent false alarms or system failure.
- The alarm produces a loud sound (105 dB). Avoid prolonged exposure to prevent hearing damage.
- This device is intended as a deterrent and an alert system. It does not replace proper security measures or emergency protocols.
- Forsøg ikke at modificere eller reparere enheden. Overlad al service til kvalificeret personale.
Pakkens indhold
Kontroller venligst, at alle varer er til stede i pakken:
- STI 6405 Exit Stopper Multi-Function Door Alarm Unit
- Monteringsudstyr (skruer, ankre)
- Two (2) Reset Keys
- Instruktionsmanual (dette dokument)
This image displays the red octagonal STI 6405 Exit Stopper Multi-Function Door Alarm. The top face of the alarm has 'STOP' and 'ALARM WILL SOUND' printed in white. Below this, there's a speaker grille and two speaker icons indicating sound output. At the bottom, a keyhole for resetting the alarm is visible, labeled 'RESET'. Two silver keys are shown next to the alarm.
Opsætning og installation
Valg af placering:
Install the alarm on or near the door frame of the emergency exit. Ensure it is easily visible and accessible for authorized personnel, but difficult for unauthorized individuals to tamper med.
Montering af enheden:
- Position the alarm unit on the desired surface.
- Mark the locations for the mounting screws through the designated holes on the unit's backplate.
- Bor om nødvendigt forhuller med et passende bor til dit vægmateriale.
- Secure the alarm unit to the surface using the provided mounting screws. Ensure it is firmly attached and does not wobble.
Strømforsyning til enheden:
The STI 6405 operates on a 9-volt battery (not included). Open the battery compartment (usually on the back or side of the unit) and insert a fresh 9V alkaline battery, observing the correct polarity. Close the compartment securely.
Betjeningsvejledning
Aktivering af alarmen:
The alarm is typically armed automatically when the door it monitors is closed and the unit is powered. Some models may have an arming switch; refer to the specific markings on your unit.
Alarmaktivering:
When the monitored door is opened, the alarm will sound immediately at 105 dB. The message "ALARM WILL SOUND" on the unit serves as a visual warning.
Nulstilling af alarmen:
To silence and reset the alarm, insert one of the provided keys into the keyhole labeled "RESET" on the front of the unit. Turn the key to the reset position (usually clockwise) and hold it momentarily until the alarm stops. Return the key to the original position and remove it. The alarm will re-arm once the door is closed.
Opretholdelse
Udskiftning af batteri:
Replace the 9-volt battery annually or when the low battery indicator (if present) illuminates, or if the alarm sound becomes weak. Always use a fresh, high-quality 9V alkaline battery.
Rensning:
Wipe the unit periodically with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing eller interne komponenter.
Test:
Regularly test the alarm (e.g., monthly) by briefly opening the monitored door to ensure it functions correctly. Reset the alarm immediately after testing.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Alarm does not sound when door opens. | Dead or low battery. Unit not properly armed. Sensor misalignment. | Replace battery. Check arming switch/status. Verify sensor alignment with door. |
| Alarm sounds weakly. | Lavt batteri. | Udskift batteriet. |
| Alarm cannot be reset. | Key not fully inserted or turned. Internal malfunction. | Ensure key is fully inserted and turned to the reset position. If issue persists, contact support. |
| Falske alarmer. | Loose mounting. Vibration. Sensor interference. | Ensure unit is securely mounted. Check for sources of vibration. Inspect sensor area for obstructions. |
Specifikationer
- Model: STI-6405
- Fabrikant: SAFETY TECHNOLOGY STI
- Strømkilde: 9 Volts (9V battery, not included)
- Lydniveau: 105 dB (at 1 meter)
- Dimensioner: Cirka 15.24 x 12.7 x 5.08 cm (6 x 5 x 2 tommer)
- Vægt: Cirka 454 g (1 lb)
- Funktioner: Multi-function, Momentary Reset Option
Garanti og support
For warranty information or technical support, please contact your authorized STI dealer or visit the official SAFETY TECHNOLOGY STI webwebstedet. Behold din købskvittering som købsbevis.
Fabrikant: SAFETY TECHNOLOGY STI
Webwebsted: www.sti-usa.com (Eksamplinket, det faktiske link kan variere)
