1. Introduktion
The Steinel L 115 S outdoor sensor luminaire combines simple elegance with maximum efficiency. It features a hand-blown crystal glass and reliable sensor technology, ensuring lighting is activated only when truly necessary. The integrated sensor detects movement within its range, and the fixture diffuses light uniformly and pleasantly, contributing to increased quality of life, enhanced safety, and maximum energy savings through intelligent technology.
Figure 1: The Steinel L 115 S sensor luminaire, showcasing its design with a clear glass globe and an E27 bulb socket.
2. Sikkerhedsinstruktioner
Please read these instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med nationale ledningsføringsforskrifter og lokale el-forskrifter.
- Ensure the power supply is disconnected at the main circuit breaker before commencing any installation or maintenance work.
- Do not modify the product in any way. Use only genuine replacement parts.
- This product is designed for outdoor use (IP44 rated). Ensure proper sealing during installation to maintain its IP rating.
- Se ikke direkte ind i lyskilden, når den er aktiv.
3. Pakkens indhold
The package for your Steinel L 115 S sensor luminaire includes the following components:
- 1 x L 115 S outdoor sensor lamp
- E27 socket (integrated)
- Mounting material (screws, wall plugs)
- Brugsanvisning
Note: The light source (bulb) is not included and must be purchased separately (max. 60W E27).
4. Opsætning og installation
4.1 Mounting the Luminaire
The luminaire is designed for quick and easy wall mounting. Ensure the mounting surface is stable and suitable for the weight of the fixture.
- Mark the drilling points on the wall using the mounting plate as a template.
- Bor huller og isæt de medfølgende vægdyvler.
- Connect the electrical wires (Live, Neutral, Earth) to the terminal block inside the luminaire's base. Ensure correct polarity.
- Secure the luminaire base to the wall using the provided screws.
- Insert an E27 bulb (max. 60W) into the socket.
- Attach the glass globe securely to the luminaire base.
Figur 2: Eksample of the L 115 S luminaire installed on a wall, providing illumination for an entrance.
Figure 3: Technical dimensions and wiring diagram for installation.
5. Betjeningsvejledning
5.1 Sensor Adjustment
The integrated infrared sensor offers a 240° detection angle and a maximum range of 12 meters. Adjustment knobs located under the cover allow for precise configuration of the luminaire's behavior.
- Time Setting (5 seconds - 15 minutes): Adjusts how long the light remains on after motion is detected.
- Twilight Setting (2-1000 lx): Determines the ambient light level at which the sensor becomes active. The light will only switch on when the ambient light falls below this set value.
- Basic Light (0-50%): Allows for a continuous low-level illumination (basic light) that brightens to full power upon detection.
- Customizable Range: The detection range can be adjusted to suit specific needs, preventing unwanted activations.
Figur 4: Overview of sensor settings and features.
Figure 5: Illustration of the 240-degree detection zone and 12m range.
For an augmented reality view of the product in your space, scan the QR code shown in Figure 4 or visit: Steinel AR View
5.2 Manuel tilsidesættelse
The luminaire features an optional permanent lighting mode for up to 4 hours. This can be activated by quickly switching the light switch OFF and ON twice. To return to sensor operation, switch the light OFF for a few seconds and then ON again.
5.3 Udskiftning af pære
The L 115 S uses a standard E27 socket, allowing for easy replacement of the bulb. Ensure the power is disconnected before replacing the bulb. Use LED bulbs up to a maximum of 60W.
6. Vedligeholdelse
To ensure optimal performance and longevity of your Steinel L 115 S luminaire, follow these simple maintenance guidelines:
- Rensning: Regularly clean the glass globe and the sensor lens with a soft, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladerne.
- Inspektion: Periodically check the luminaire for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician.
- Pære: Replace the E27 bulb as needed. Always ensure the power is off before replacing the bulb.
7. Fejlfinding
If you encounter issues with your Steinel L 115 S luminaire, refer to the table below for common problems and their solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Light does not switch on. | No power supply; Bulb faulty; Twilight setting too high; Sensor obstructed. | Check circuit breaker; Replace bulb; Adjust twilight setting; Clear sensor area. |
| Lyset forbliver tændt konstant. | Continuous motion in detection zone; Manual override activated; Time setting too long. | Check detection zone for constant movement; Deactivate manual override; Reduce time setting. |
| Light switches on without apparent reason. | Small animals or objects in detection zone; Sensor sensitivity too high; Heat sources. | Adjust detection range; Reduce sensor sensitivity; Ensure no heat sources are in the detection area. |
| Lyset flimrer eller dæmpes. | Loose wiring; Faulty bulb; Voltage udsving. | Check wiring connections (by a qualified electrician); Replace bulb; Consult electrician for voltage problemer. |
8. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Steinel |
| Modelnummer | 657413 (L115S White) |
| Produktmål (L x B x H) | 23 x 23 x 39.6 cm |
| Varens vægt | 1.14 kilo |
| Farve | Hvid |
| Materiale | Glas, Plast |
| IP-vurdering | IP44 (stænksikker) |
| Antal pærer | 1 (ikke inkluderet) |
| Maksimal watt | 60 watt |
| Voltage | 230-240 volt |
| Specifikke anvendelser | Udendørs |
| Særlige funktioner | Bevægelsesdetektor |
| Skift stil | Bevægelsesdetektor |
| Installationstype | Vægmontering |
| Pære type | LED (kompatibel) |
| Cap Type (Socket) | E27 |
| Gennemsnitlig levetid | 50,000 Hours (estimated for product, not bulb) |
| Sensortype | Infrarød |
| Detektionsvinkel | 240° |
| Detektionsområde | Maks. 12 meter |
| Tidsindstilling | 5 sekunder - 15 minutter |
| Tusmørkeindstilling | 2 - 1000 lux |
9. Garanti og support
Steinel products are developed in Germany and manufactured in Europe, ensuring high quality and reliability.
Garanti: Spare parts availability is guaranteed for 1 year. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Steinel customer service.
Støtte: For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your retailer or visit the official Steinel website for customer support information. You can find more information about Steinel products and support at the Steinel Brand Store.
