Steinel RS 16 L S Glass Ceiling Light with 360° Motion Detector User Manual

1. Introduktion

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Steinel RS 16 L S Glass Ceiling Light with 360° Motion Detector. Please read these instructions carefully before use and retain them for future reference.

The Steinel RS 16 L S is an economical high-frequency detector lamp (275 mm diameter) designed for wall and ceiling installation in indoor areas such as corridors, entrances, stairwells, or bathrooms. It features an E27 socket for bulbs up to 60W maximum. The mouth-blown opal white glass body ensures uniform and soft light distribution. An invisible 360° high-frequency sensor detects even the smallest movements, activating the light, which then switches off after a user-defined time.

2. Sikkerhedsoplysninger

Advarsel: Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med nationale ledningsføringsforskrifter og lokale el-forskrifter.

• Ensure the power supply is disconnected before installation, maintenance, or bulb replacement.
• Do not attempt to modify the product. Any modifications may void the warranty and pose safety risks.
• This product is designed for indoor use only (IP44 rating). Do not expose to direct water spray or extreme weather conditions.
• Brug kun E27-pærer med en maksimal watttage på 60W.
• Hold emballagemateriale væk fra børn.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Steinel RS 16 L S Ceiling Light unit
• Monteringsudstyr (skruer, vægdyvler)
• Instruktionsmanual

Note: The light bulb is not included in the delivery and must be purchased separately.

4. Specifikationer

5. Opsætning og installation

The Steinel RS 16 L S is designed for straightforward installation on ceilings or walls. Ensure the power supply is off before proceeding.

5.1 Monteringssted

Select a suitable indoor location such as corridors, stairwells, bathrooms, kitchens, or cellars. The IP44 rating makes it suitable for areas with moderate moisture, but not for direct water exposure.

5.2 Ledningsføring

Lamp and sensor share the same connection, requiring only two wires for power. Connect the live (L) and neutral (N) wires from your mains supply to the corresponding terminals on the fixture. Ensure all connections are secure.

5.3 Fastgørelse af armaturet

Use the provided mounting hardware to securely attach the plastic chassis to the ceiling or wall. Once the chassis is mounted and wired, install an E27 bulb (max. 60W) into the socket. The glass cover attaches without screws using a bayonet fitting, allowing for tool-free bulb changes.

6. Betjeningsvejledning

The integrated high-frequency sensor provides automatic light activation based on movement and ambient light levels. The settings can be adjusted using the rotary controls located on the fixture.

6.1 Sensor Functionality

The 360° high-frequency sensor detects movement independently of temperature. It can detect objects through light building materials such as wood, glass, and lightweight partitions. This allows for discreet integration of the sensor behind the glass cover.

6.2 Justering af indstillinger

The following settings can be adjusted via rotary controls:

• Registreringsområde: Electronically adjustable from 3 to 8 meters. Rotate the control to set the desired detection radius.
• Twilight Threshold: Adjustable from 2 to 2000 lux. This setting determines the ambient light level at which the sensor becomes active. For example, a lower lux value means the light will only activate in darker conditions.
• Tidsindstilling: Adjustable from 5 seconds to 15 minutes. This controls how long the light remains on after motion is detected and no further motion is sensed.

6.3 Additional Load Connection

The fixture includes a connection option for additional loads, such as a bathroom fan or WC ventilation system, allowing them to be activated simultaneously with the light.

6.4 Permanent Lighting

The interior lighting with motion detector is designed for permanent lighting operation if desired, depending on the specific wiring configuration and settings.

7. Vedligeholdelse

Regular cleaning and inspection will help maintain the performance and appearance of your Steinel RS 16 L S ceiling light.

• Rensning: Disconnect power before cleaning. Wipe the glass cover and plastic chassis with a soft, damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladerne.
• Udskiftning af pære: Ensure power is disconnected. The glass cover can be easily removed via its bayonet fitting for tool-free bulb replacement. Replace with an E27 bulb, maximum 60W.
• Inspektion: Periodically check for any signs of damage to the wiring or fixture. If any damage is found, disconnect power and consult a qualified electrician.

8. Fejlfinding

If you encounter issues with your Steinel RS 16 L S, refer to the following common problems and solutions:

9. Garanti og support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official STEINEL webwebsted. Gem din købsbevis til garantikrav.