Rabalux 2306 Under-Cabinet Light Instruction Manual

1. Introduktion

This manual provides essential information for the safe installation, operation, and maintenance of your Rabalux 2306 Under-Cabinet Light. Please read these instructions carefully before using the product and retain them for future reference.

The Rabalux 2306 Under-Cabinet Light is designed to provide efficient and discreet illumination for work surfaces and other indoor areas. Its compact design and integrated on/off switch offer convenience and energy-saving functionality.

2. Sikkerhedsoplysninger

WARNING: Risk of electric shock. Always disconnect power before installation, maintenance, or bulb replacement.

• Read all instructions thoroughly before proceeding with installation or use.
• This product is intended for indoor use only (IP20 rating). Do not expose to water or high humidity.
• Ensure the main power supply is switched off at the circuit breaker before performing any electrical work.
• Forsøg ikke at modificere produktet på nogen måde. Uautoriserede ændringer kan ugyldiggøre garantien og udgøre en sikkerhedsrisiko.
• Kontakt en kvalificeret elektriker, hvis du er usikker på nogen del af installationsprocessen.
• Hold emballagemateriale utilgængeligt for børn.

3. Pakkens indhold

Kontroller venligst, at alle komponenter er til stede og ubeskadigede:

• 1 x Rabalux 2306 Under-Cabinet Light fixture
• 1 x T8 10W Tubular Bulb (G13 base, 630 lumens, 2700 Kelvin)
• Monteringsudstyr (skruer, ankre)
• Monteringsvejledning

4. Opsætning og installation

Follow these steps for proper installation of your under-cabinet light:

1. Forbered til installation: Unpack all components and verify against the package contents list. Ensure the main power supply to the installation area is switched off at the circuit breaker.
2. Vælg monteringssted: Select a suitable, dry location under a cabinet or on a surface. Ensure there is sufficient space for the fixture (39.5 cm length).
3. Markér borepunkter: Hold the light fixture in the desired position and mark the drilling points for the mounting screws.
4. Sikker armatur: Drill pilot holes at the marked points. Insert appropriate wall anchors if necessary. Secure the light fixture firmly using the provided mounting hardware.
5. Elektrisk tilslutning: This light is designed for direct connection to the main power supply. Connect the electrical wires from the fixture to your household wiring according to local electrical codes. Ensure all connections are secure and properly insulated.
6. Installer pære: Carefully insert the T8 G13 tubular bulb into the socket by aligning the pins and twisting gently until it is securely seated.
7. Test drift: Once installation is complete and all connections are secure, restore power at the circuit breaker. Test the light using the integrated on/off switch.

This image displays the Rabalux 2306 Under-Cabinet Light, a silver-colored fixture with a translucent diffuser and a black on/off toggle switch visible on its top surface. The light is designed for discreet installation under cabinets.

5. Betjeningsvejledning

The Rabalux 2306 Under-Cabinet Light features an integrated on/off switch for convenient control. To operate:

• At tænde: Locate the black toggle switch on the top surface of the light fixture. Push the switch to the 'ON' position (often indicated by a line or 'I').
• At slukke: Push the switch to the 'OFF' position (often indicated by a circle or 'O').

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din lampe.

Rensning

• Always disconnect power to the fixture before cleaning.
• Tør armaturets yderside af med en blød, tør eller let fugtet klud.amp klæde.
• Brug ikke slibende rengøringsmidler, opløsningsmidler eller stærke kemikalier, da disse kan beskadige overfladen eller de elektriske komponenter.
• Sørg for, at armaturet er helt tørt, før du genopretter strømmen.

Udskiftning af pære

The Rabalux 2306 uses a replaceable G13 T8 tubular fluorescent bulb.

• Afbryd strømmen: Ensure the power supply to the fixture is completely disconnected at the circuit breaker.
• Fjern gammel pære: Carefully twist the old G13 T8 bulb approximately 90 degrees and gently pull it out of the socket.
• Indsæt ny pære: Align the pins of the new G13 T8 10W bulb with the slots in the socket. Push the bulb in and twist it approximately 90 degrees until it is securely locked into place.
• Gendan strøm: Restore power at the circuit breaker and test the new bulb.

7. Fejlfinding

If you encounter issues with your Rabalux 2306 Under-Cabinet Light, refer to the following common problems and solutions:

8. Tekniske specifikationer

9. Garanti og support

For information regarding warranty coverage, technical support, or spare parts, please contact your retailer or the manufacturer, Rabalux. Please have your product model number (2306) and proof of purchase available when contacting support.