Manfrotto 104G

Manfrotto 104G 100mm Wheel Set with Brakes Instruction Manual

Model: 104G | Brand: Manfrotto

1. Introduktion

This manual provides essential instructions for the safe and effective use of your Manfrotto 104G 100mm Wheel Set with Brakes. Please read this manual thoroughly before installation and operation to ensure proper functionality and longevity of the product.

2. Produktet er slutview

The Manfrotto 104G Wheel Set is designed to add mobility to compatible cine stands, allowing for easy repositioning of lighting equipment in a studio environment. This set includes three 100mm wheels, each equipped with an individual brake mechanism for secure positioning.

Three Manfrotto 104G 100mm wheels with brakes, shown individually against a white background.

Billede 1: The Manfrotto 104G 100mm Wheel Set. Each wheel features a robust metal housing, a gray rubber wheel, and a foot-operated brake lever.

Nøglefunktioner:

  • Set of 3 wheels for comprehensive stand mobility.
  • Integrated brake mechanism on each wheel for secure locking.
  • 100mm (3.94 inch) diameter wheels for smooth movement.
  • M10 screw attachment for compatibility with various cine stands.
  • Load capacity: 220.46 lbs (100 kg).

3. Opsætning og installation

  1. Klargør stativet: Ensure your cine stand is stable and on a flat surface. Identify the attachment points for the wheels, typically at the base of each leg.
  2. Fastgør hjul: Each Manfrotto 104G wheel features an M10 screw attachment. Carefully thread the M10 screw of each wheel into the corresponding receptacle on your cine stand's legs.
  3. Sikker fastgørelse: Hand-tighten each wheel securely. Do not overtighten, but ensure there is no wobble. Verify that all three wheels are firmly attached before placing any equipment on the stand.
  4. Test mobilitet: Once all wheels are installed, gently push the stand to confirm smooth movement and stability.

Note: Always ensure the stand is empty or securely held when attaching or detaching wheels to prevent accidental tipping.

4. Betjeningsvejledning

Flytning af stativet:

To move the cine stand, ensure all wheel brakes are disengaged. Gently push or pull the stand to the desired location. Avoid sudden, forceful movements, especially on uneven surfaces.

Engaging the Brakes:

Each wheel is equipped with a foot-operated brake lever. To engage a brake, press down firmly on the lever until it locks into place. This will prevent the wheel from rolling and swiveling.

Disengaging the Brakes:

To disengage a brake, lift the brake lever upwards until it releases. Ensure all three brakes are disengaged before attempting to move the stand.

Sikkerhedsforanstaltning: Always engage all three brakes when the stand is in its desired position and supporting equipment to prevent accidental movement.

5. Vedligeholdelse

  • Regelmæssig rengøring: Keep the wheels and brake mechanisms free from dust, dirt, and debris. Use a soft, damp klud til rengøring. Undgå skrappe kemikalier.
  • Undersøg for slitage: Periodically check the wheel treads for signs of wear or damage. Ensure the M10 screw attachments remain tight.
  • Brake Functionality: Test the brakes regularly to ensure they engage and disengage smoothly and securely.
  • Opbevaring: When not in use, store the wheels in a clean, dry environment.

6. Fejlfinding

  • Hjulene ruller ikke jævnt:
    • Check for debris caught in the wheel or swivel mechanism.
    • Ensure brakes are fully disengaged.
    • Inspect for damage to the wheel or axle.
  • Brakes not engaging/disengaging:
    • Check for obstructions around the brake lever.
    • Ensure the lever mechanism is clean and free of dirt.
    • If the issue persists, contact Manfrotto support.

7. Specifikationer

FeatureDetalje
VedhæftningstypeM10 skrue
FarveGrå
Hjul diameter100 mm (3.94 tommer)
Belastningskapacitet220.46 lbs (100 kg)
Item Weight (per set)6.61 lbs (3 kg) (Note: Other sources may list slightly different weights.)
Produktmål (pakke)13.19 x 8.07 x 3.54 tommer (33.5 x 20.5 x 9 cm)
Modelnummer104G
FabrikantManfrotto

8. Garanti og support

For warranty information or technical support regarding your Manfrotto 104G Wheel Set, please refer to the official Manfrotto website or contact Manfrotto customer service directly. Keep your purchase receipt as proof of purchase.

Manfrotto Official Webwebsted: www.manfrotto.com

Relaterede dokumenter - 104G

Preview Manfrotto CF Twin Leg Video Tripod MVTTWIN Series - Instructions & Maintenance
Comprehensive instructions for setting up, using, and maintaining Manfrotto CF Twin Leg video tripods, including models MVTTWINMA, MVTTWINMC, MVTTWINGA, and MVTTWINGC. Learn about features, leg adjustment, head mounting, and load capacity checks.
Preview Instruktioner til Manfrotto MLTSA3301B TetherGear-tabletholder
Information om montering og dele til Manfrotto MLTSA3301B TetherGear tabletholder.
Preview Manfrotto MVG300XM Gimbal: Instruktioner, specifikationer og brugervejledning
Omfattende guide til Manfrotto MVG300XM treakset gimbal. Dækker opsætning, installation, balancering, betjening, opladning, app-tilslutning og sikkerhedsforanstaltninger for DSLR- og spejlløse kameraer.
Preview Manfrotto MVG460 & MVG460FFR Gimbal Instruktioner
Dette dokument indeholder instruktioner til Manfrotto MVG460 og MVG460FFR 3-aksede stabiliserede håndholdte gimbals, der dækker opsætning, balancering, betjening og specifikationer.
Preview Manfrotto MH490-BH kuglehoved brugervejledning
Instruktioner til brug af Manfrotto MH490-BH kuglehoved med spejlløse, 35 mm og mellemformatkameraer, fastgørelse af dækplade, montering, afmontering og betjening af kameraet.
Preview Manfrotto Befree Advanced MKBFRLA4FB-BH stativvejledning
Dette dokument indeholder omfattende instruktioner til opsætning, brug og vedligeholdelse af Manfrotto Befree Advanced MKBFRLA4FB-BH-stativet. Det er designet til avancerede rejsefotografer og tilbyder bærbarhed og stabilitet til spejlløse kameraer og mellemformat DSLR-kameraer.