Genie GWKPD-BL trådløst tastatur med Intellicode brugermanual

Indledning

This manual provides detailed instructions for the installation, programming, operation, and maintenance of your Genie GWKPD-BL Wireless Keypad with Intellicode. This keypad is designed for use with Genie Intellicode garage door openers manufactured after 1995. Please read these instructions carefully before proceeding with setup.

Produkt overview

Genie GWKPD-BL Wireless Keypad with Intellicode, showing the keypad and programming instructions under a protective cover.

This image displays the Genie GWKPD-BL Wireless Keypad. The top portion, covered by a flip-up lid, shows detailed programming instructions. The lower portion features the numeric keypad (0-9), a 'PROGRAM' button, and up/down arrow keys, with the Genie logo at the bottom.

The Genie GWKPD-BL Wireless Keypad offers convenient access to your garage without the need for a remote control. It features a backlit keypad for visibility in low light conditions and is compatible with Genie Intellicode systems.

Opsætning og programmering

Step 1: Setting Up Your Personal Identification Number (PIN)

Tryk på PROGRAM knappen på tastaturet.
Brug OP/NED piletaster to select a number (0-9).
Enter your new PIN, which must be between 3 and 8 characters long.
The keypad will display "KEYPAD PROGRAMMED" upon successful PIN entry.

Step 2: Programming the Opener

This step links your keypad to your garage door opener. The exact location of the programming button on your opener may vary depending on its style.

Find PROGRAM or Learn Code Button on your garage door opener. Press this button. The opener's LED light will begin to flash.
On the keypad, enter your previously set PIN.
Tryk på UP/DOWN arrow key on the keypad. The opener's LED light should turn ON steadily.
Tryk på UP/DOWN arrow key again. The opener's LED light should turn OFF.
Tryk på UP/DOWN arrow key one more time. The garage door opener should activate (RUN).

Operating the Keypad

Opening/Closing the Garage Door

Enter your personal PIN on the keypad.
Tryk på UP/DOWN arrow key. The garage door opener will activate, either opening or closing the door.

Temporary PIN Feature

The keypad supports a temporary access code feature, allowing you to grant temporary access to visitors or service personnel without sharing your primary PIN. Consult the full product documentation for detailed instructions on setting and managing temporary PINs.

Opretholdelse

Udskiftning af batteri

The keypad is powered by a 9V alkaline battery. If the keypad's backlight does not illuminate when a button is pressed, the battery needs to be replaced.

Open the battery compartment, typically located on the back of the keypad.
Fjern det gamle 9V-batteri.
Insert a new 9V alkaline battery, ensuring correct polarity.
Luk batterirummet forsvarligt.

Fejlfinding

Keypad not responding or flashing red LED: If buttons are pressed too quickly, the keypad may become unresponsive and flash a red LED. Wait a few seconds for the keypad to reset, then re-enter your PIN at a moderate pace.
Forgotten PIN or changing PIN: To change your PIN, you will typically need to clear the old one and then reprogram the keypad with a new PIN, followed by reprogramming your garage door opener as if it were a new remote.
Clearing all existing codes from opener: If you need to clear all programmed remotes and keypads from your garage door opener (e.g., for security reasons or to resolve programming conflicts), press and hold the 'Learn' button on your garage door opener for several seconds until the learn light goes out. This action will erase all previous codes, requiring all remotes and keypads to be reprogrammed.
Door not opening after successful programming: Ensure the keypad is within range of the garage door opener. Check for any obstructions that might prevent the door from moving. Verify that the opener itself is receiving power.

Specifikationer

Mærke	Genie
Modelnummer	GWKPD-BL
Varens vægt	11.2 ounce
Produktdimensioner	2 x 8 x 7 tommer
Strømkilde	Batteridrevet
Batterier påkrævet	1 x 9V (inkluderet)
Battericelletype	Alkalisk
Forbindelsesteknologi	Trådløs
Kompatible enheder	Genie Intellicode Garage Door Openers (manufactured after 1995)
Speciel funktion	Ergonomic, Backlit Keypad

Garantioplysninger

The Genie GWKPD-BL Wireless Keypad comes with a one-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty card included with your product or contact Genie customer support.

Støtte

For additional assistance, technical support, or to inquire about replacement parts, please contact Genie customer service:

Telefon: 1-800-XXX-XXXX (Please refer to your product packaging or Genie's official website for the current contact number.)
Webwebsted: www.geniecompany.com

	Genie trådløst tastatur Intellicode programmerings- og betjeningsvejledning Omfattende vejledning til trådløse Genie Intellicode-tastaturpaneler, der dækker programmering, betjening, montering, batteriudskiftning og fejlfinding. Indeholder sikkerhedsadvarsler og lovgivningsmæssige oplysninger.
	Installations- og betjeningsvejledning til Genie Intellicode-tastatur Denne vejledning indeholder instruktioner til installation, programmering og betjening af Genie Intellicode-tastaturet, herunder funktioner som ændring af PIN-koder, indstilling af midlertidige PIN-koder og udskiftning af batterier.
	Brugsanvisning til Genie GK-R trådløst tastatur Dette dokument indeholder instruktioner til programmering og betjening af Genie GK-R trådløst tastatur til garageportåbnere. Det dækker opsætning af PIN-kode, programmering til enkelt- og flerdøre, betjening af tastatur, montering, udskiftning af batteri og nulstilling af tastaturet til fabriksindstillingerne.
	GenieMaster-transmitterens betjenings- og programmeringsvejledning Denne vejledning indeholder instruktioner til betjening og programmering af GenieMaster-senderen, som er kompatibel med Intellicode 1, Intellicode 2 og garageportåbnere med kodekontakt. Den indeholder sikkerhedsadvarsler, programmeringstrin og oplysninger om batteriudskiftning.
	Genie Universal-tastatur: Programmerings-, betjenings- og DIP-switch-kompatibilitetsvejledning Omfattende instruktioner til programmering og betjening af Genie Universal Keypad, inklusive detaljerede trin til DIP-switch-kompatible garageportåbnere, PIN-styring og montering.
	Udskiftning af Genie Intellicode Garageportfjernbetjening - RC-SM26-GN-1 brugervejledning Denne vejledning indeholder specifikationer og programmeringsinstruktioner til den nye Genie Intellicode Garage Door Remote, model RC-SM26-GN-1. Lær, hvordan du programmerer fjernbetjeningen til Intellicode 1- og Intellicode 2-åbnere, udskifter batteriet og sletter eksisterende fjernbetjeninger.

Genie GWKPD-BL