Indledning
This manual provides detailed instructions for the safe and efficient use of your Zap Portable AA Ni-MH Battery Charger, Model ZAP-71239-RX4. Please read this manual thoroughly before operating the device and retain it for future reference.
Image: The Zap Portable AA Ni-MH Battery Charger (white casing with silver trim) shown alongside four green Zap Ni-MH AA 1200mAh 1.2V rechargeable batteries. The charger features LED indicators and a USB port.
Sikkerhedsinstruktioner
- Forsøg ikke at skille opladeren ad, reparere den eller ændre den.
- Keep the charger and batteries away from water, moisture, and high temperatures.
- Use only Ni-MH AA rechargeable batteries with this charger. Do not attempt to charge alkaline, carbon-zinc, or other non-rechargeable battery types.
- Ensure correct battery polarity (+/-) when inserting batteries into the charger.
- Kortslut ikke batteripolerne.
- Tag opladeren ud af strømkilden, når den ikke er i brug, eller før rengøring.
- Denne enhed er ikke beregnet til brug af personer (inklusive børn) med nedsatte fysiske, sensoriske eller mentale evner eller mangel på erfaring og viden, medmindre de er blevet under opsyn eller instruktion i brugen af apparatet af en person, der er ansvarlig for deres sikkerhed. .
Pakkens indhold
Tjek venligst pakken for følgende varer:
- 1 x Zap Portable AA Ni-MH Battery Charger (Model ZAP-71239-RX4)
- 4 x Zap Ni-MH AA 1200mAh 1.2V Rechargeable Batteries
- 1 x USB Charging Cable (assumed, common for portable chargers)
- 1 x Brugermanual (dette dokument)
Opsætning
- Tilslut til strøm: Connect the provided USB charging cable to the charger's input port and then to a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank). The charger's LED indicators may light up to show it is powered.
- Indsæt batterier: Open the battery compartment. Insert one to four AA Ni-MH rechargeable batteries into the designated slots, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the charger.
Betjeningsvejledning
- Initierende opkrævning: Once batteries are correctly inserted and the charger is connected to a power source, the charging process will begin automatically.
- LED-indikatorer: The charger features LED indicators to display the charging status.
- Solid Red/Orange: Indicates batteries are currently charging.
- Solid grøn: Indicates batteries are fully charged.
- Blinker: May indicate an error (e.g., incorrect battery type, faulty battery, or improper insertion). Refer to the Troubleshooting section.
- Opladningstid: Charging time varies depending on the battery capacity and the power output of the USB source. For the included 1200mAh batteries, a full charge typically takes several hours.
- Fjernelse af batterier: Once the LED indicators show a full charge (solid green), disconnect the charger from the power source and carefully remove the charged batteries.
Opretholdelse
- Rensning: Use a soft, dry cloth to clean the charger's exterior. Do not use liquid cleaners or solvents.
- Opbevaring: Store the charger and batteries in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove batteries from the charger.
- Batteripleje: For optimal battery life, avoid completely draining Ni-MH batteries before recharging.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Opladerens LED'er lyser ikke. | Ingen strømforbindelse eller defekt kabel. | Ensure the USB cable is securely connected to both the charger and the power source. Try a different USB cable or power source. |
| Batteries are not charging (LEDs flashing or not changing). | Incorrect battery type, improper insertion, or faulty battery. | Verify batteries are Ni-MH AA type. Re-insert batteries ensuring correct polarity. Try charging individual batteries to identify a faulty one. |
| Charger or batteries become excessively hot. | Overcharging, faulty battery, or poor ventilation. | Immediately disconnect the charger. Ensure proper ventilation around the charger. Do not use damaged or leaking batteries. |
Specifikationer
- Model: ZAP-71239-RX4
- Kompatible batterityper: AA Ni-MH Rechargeable
- Included Battery Capacity: 1200mAh (1.2V)
- Input: USB (Voltage/Amperage not specified, typical 5V/1A or 5V/2A)
- Dimensioner: 15.24 x 7.62 x 22.86 cm (6 x 3 x 9 tommer)
- Vægt: 294.84 g (0.65 lbs)
- Første tilgængelige dato: 9. august 2012
Garanti og support
For warranty information or technical support, please refer to the documentation included with your purchase or contact Zap customer service through their official website. Please have your model number (ZAP-71239-RX4) and purchase date available when seeking support.
