Progress Lighting P7206-30EB Fluorescent Light Fixture User Manual

Produkt overview

The Progress Lighting P7206-30EB is a contemporary flush mount fluorescent light fixture designed for various indoor applications such as kitchens or workshops. It features contoured white acrylic domes and curved trim, providing a pleasing halo effect. This fixture operates on a standard 120-volt HPF electric ballast and is designed for ceiling mount installation.

Figur 1: Forside view of the Progress Lighting P7206-30EB fluorescent light fixture, showcasing its contoured white acrylic domes and textured white molding.

Sikkerhedsoplysninger

ADVARSEL: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or bulb replacement. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unsure about proper installation.

• Installer ikke denne armatur i våde eller dråber.amp steder.
• Ensure the fixture is securely mounted to a structural element of the ceiling.
• Brug kun den specificerede pæretype og wattage for at forhindre overophedning og beskadigelse.
• Hold brandfarlige materialer væk fra lysarmaturet.

Pakkens indhold

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact Progress Lighting customer service for assistance.

• (1) P7206-30EB Fluorescent Light Fixture
• (1) Mounting Hardware Kit (screws, wire nuts, etc.)
• Bulbs (4x 32W F32T8) are NOT included and must be purchased separately.

Specifikationer

Opsætning og installation

Vigtig: Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Ensure power is disconnected at the main circuit breaker before proceeding.

1. Forbered installationsområdet:
   • Turn off power at the main circuit breaker or fuse box to the outlet box where the fixture will be installed.
   • Sørg for, at monteringsfladen er ren, tør og strukturelt sund.
2. Monter armaturet:
   • Tag forsigtigt armaturet ud af emballagen.
   • Align the fixture's mounting holes with the outlet box or pre-drilled holes in the ceiling. This fixture is designed to cover a standard outlet box.
   • Secure the fixture to the ceiling using the provided mounting screws. Ensure it is firmly attached and does not wobble.
3. Elektriske forbindelser:
   • Connect the fixture's white wire to the white (neutral) wire from the outlet box using a wire nut.
   • Connect the fixture's black wire to the black (hot) wire from the outlet box using a wire nut.
   • Connect the fixture's ground wire (usually bare copper or green) to the house ground wire (usually bare copper or green) from the outlet box. If no house ground wire is present, connect to the green grounding screw on the mounting bracket.
   • Stik forsigtigt alle ledninger ind i stikdåsen.
4. Install Bulbs and Diffuser:
   • Insert four (4) 32-watt F32T8 fluorescent bulbs into the lamp Sørg for, at de sidder korrekt.
   • Carefully place the white acrylic diffuser onto the fixture, ensuring it is securely in place.
5. Gendan strøm:
   • Tænd for strømmen igen ved afbryderen eller sikringsboksen.
   • Test the fixture to ensure it operates correctly.

Figure 2: The P7206-30EB fixture installed in a kitchen setting, demonstrating its flush mount appearance and illumination.

Betjeningsvejledning

The Progress Lighting P7206-30EB fixture is designed for simple operation. Once properly installed and wired to a wall switch, it functions like any standard light fixture.

1. Tænd/sluk:
   • Flip the wall switch connected to the fixture to the "ON" position to illuminate the bulbs.
   • Flip the wall switch to the "OFF" position to turn off the light.

Opretholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din lampe.

• Rensning:
  • Before cleaning, ensure the power to the fixture is turned off at the circuit breaker.
  • Tør armaturets yderside og akryldiffusoren af ​​med en blød, tør klud.amp klæde.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
  • Lad armaturet tørre helt, før du genopretter strømmen.
• Udskiftning af pære:
  • Sluk for strømmen til armaturet ved afbryderen.
  • Fjern forsigtigt akryldiffusoren.
  • Allow old bulbs to cool before handling. Gently twist and remove the old F32T8 fluorescent bulbs.
  • Insert new 32-watt F32T8 fluorescent bulbs, ensuring they are properly seated in the lamp indehavere.
  • Replace the acrylic diffuser.
  • Gendan strømmen og test armaturet.

Fejlfinding

Hvis du oplever problemer med din lampe, kan du se følgende almindelige problemer og løsninger:

If the problem persists after attempting these solutions, contact a qualified electrician or Progress Lighting customer support.

Garanti og support

Garanti: The Progress Lighting P7206-30EB fixture comes with a 1 års begrænset garanti fra købsdatoen. Denne garanti dækker defekter i materialer og udførelse ved normal brug. Den dækker ikke skader som følge af forkert installation, ulykker, misbrug, misbrug eller uautoriserede reparationer.

Kundesupport: For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer service. Refer to the official Progress Lighting webhjemmeside for de seneste kontaktoplysninger.

Gem venligst din købskvittering som købsbevis af garantiårsager.