Progress Lighting P5642-31 6-tommer cylinder udendørs væglampe brugermanual

1. Introduktion

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting 6-Inch Cylinder Outdoor Wall Sconce (Model P5642-31). This modern up/down wall light is designed for both interior and exterior applications, offering ambient or accent lighting for various spaces such as porches, patios, and outdoor walls. Constructed from durable die-cast aluminum with a black powder-coated finish, it ensures reliability and aesthetic integration with diverse architectural styles.

Image 1.1: The Progress Lighting P5642-31 6-Inch Cylinder Outdoor Wall Sconce.

2. Sikkerhedsoplysninger

ADVARSEL: Always turn off power at the main circuit breaker panel before beginning installation, servicing, or changing bulbs. Failure to do so may result in electric shock, injury, or death.

ADVARSEL: All glass components are fragile. Handle with care to prevent breakage. For use in unsheltered outdoor areas, this fixture SKAL be used with an accessory Top Cover Lens (P860045-031, sold separately) to achieve UL Wet Location listing. Without the top cover lens, the fixture is suitable for damp locations only (covered outdoor areas).

VIGTIG: Please check your local laws and electrical codes before purchasing and installing this product. Installation should be performed by a qualified electrician if you are unsure of the process.

3. Pakkens indhold

Verify that all components listed below are included in your package. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.

• Armatur (antal: 1)
• Top Cover (Quantity: 1) - Note: This refers to the standard top cover, not the optional wet location lens.
• Allen Wrench (Quantity: 1)

Hardwareindhold:

• Set screw (48-32) (Quantity: 1)
• Trådmøtrik (Antal: 3)
• Mounting plate (Quantity: 1)

Image 3.1: Package Contents Diagram.

4. Specifikationer

Image 4.1: Product Specification Sheet.

5. Opsætning og installation

5.1. Monteringsvejledning

Proper sizing and placement of outdoor lighting fixtures are crucial for both aesthetics and functionality. For entryway lighting, fixtures should generally measure 1/4 to 1/3 of the door's height. Mount them at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center. For double doors, mount lights on either side, 8 to 10 feet apart. For garages, use a single wall lantern for a one-car garage, or mount lights on either side of the doors for two or more car garages, or across the top for even illumination.

Image 5.1: Wall Lantern Sizing Guide based on door height.

5.2. Wiring and Assembly

Follow the detailed assembly steps provided in the diagram. Ensure all electrical connections are secure and comply with local electrical codes. The fixture is pre-wired for 120V AC power. Use the provided wire nuts to connect the fixture wires to the supply wires (black to black, white to white, and bare/green to bare/green ground wire).

1. Fastgør monteringspladen til udløbsboksen.
2. Make electrical connections: connect the black supply wire to the black fixture wire, the white supply wire to the white fixture wire, and the bare or green ground wire to the bare or green fixture ground wire. Secure with wire nuts.
3. Stik forsigtigt alle ledninger ind i stikdåsen.
4. Mount the fixture to the mounting plate using the provided screws.
5. Install the bulbs (see section 5.3).

Image 5.2: Assembly and Installation Instructions Diagram.

5.3. Bulb Information

This fixture uses two (2) E26 Medium Base bulbs. It accommodates a maximum of 250W PAR-38 or 150W BR-40 bulbs. For energy efficiency and cost savings, LED bulbs are recommended.

Image 5.3: Bulb and Dimming Information.

5.4. Wet Location Use

For installations in unsheltered outdoor areas exposed directly to rain, an accessory top cover lens (Model P860045-031) is required to ensure the fixture is UL listed for wet locations. This lens is sold separately. Without this lens, the fixture is only suitable for damp locations (covered outdoor areas).

Image 5.4: Wet Location Lens Requirement.

6. Betjeningsvejledning

This fixture is dimmable when used with compatible wall dimmers and dimmable light bulbs. Ensure that both the dimmer switch and the installed bulbs are rated for dimming functionality to avoid damage or improper operation.

7. Vedligeholdelse

To maintain the appearance and functionality of your fixture, follow these guidelines:

• Rensning: Rengør armaturet med en blød, damp cloth. Avoid using abrasive cleaners, solvents, or polishes as they may damage the finish.
• Udskiftning af pære: Always turn off the power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before handling.
• Inspektion: Undersøg regelmæssigt armaturet for tegn på slid, skader eller løse forbindelser. Ret eventuelle problemer omgående.

8. Fejlfinding

If your fixture is not operating correctly, refer to the following common issues and solutions:

• Lyset tænder ikke:
  • Tjek afbryderen for at sikre, at strømmen er tændt.
  • Verify that the bulbs are correctly installed and not burnt out.
  • Sørg for, at alle ledningsforbindelser er sikre.
• Lys flimrer:
  • Sørg for, at pærerne er helt spændt.
  • If using a dimmer, ensure it is compatible with the bulbs and fixture.
  • Tjek for løse ledningsforbindelser.
• Fixture is dim or not bright enough:
  • Sørg for det korrekte wattage pærer er installeret.
  • If using a dimmer, ensure it is set to the maximum brightness.

If these steps do not resolve the issue, contact customer service.

9. Garanti

Denne Progress Lighting-armatur er dækket af en 1 års begrænset garanti from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modifications. For warranty claims, please retain your proof of purchase and contact customer service.

10. Support

For missing parts, technical assistance, or any questions regarding your Progress Lighting P5642-31 fixture, please contact customer service:

• Telefon: 1-800-447-0573
• Timer: 8-8 (østlig tid), mandag-fredag
• E-mail: kundeservice@progresslighting.com