Produkt overview
The JUNG AAT581ZWW is an intermediate frame designed for the seamless installation of the "AeroTec 04" awning control unit. This frame facilitates the integration of the control unit into various JUNG switch series, ensuring a cohesive and functional setup.
It is compatible with the following JUNG frame series:
- AS 500 series (Art.-Nrs.: AS 581.. – AS 585..)
- A 500 series (Art.-Nrs.: A 581.. – A 585..)
- A plus series (Art.-Nrs.: AP 581.. – AP 585..)
- A creation series (Art.-Nrs.: AC 581.. – AC 585..)
The frame is also suitable for surface-mounted installation using the appropriate surface-mounted cap (Art.-Nrs.: AS 581 A.. – AS 583 A..). The product is supplied in an alpine white finish.
Figure 1: Jung AAT581ZWW Intermediate Frame. This image shows the square-shaped intermediate frame in alpine white, designed to house the AeroTec 04 awning control unit within various JUNG switch series.
Opsætning og installation
This intermediate frame is designed for professional installation within compatible JUNG switch series. Ensure all power is disconnected before beginning installation.
- Forberedelse: Ensure you have the correct JUNG frame (AS 500, A 500, A plus, or A creation series) and the AeroTec 04 awning control unit ready for installation.
- Montering: Carefully place the AAT581ZWW intermediate frame into the designated opening of your chosen JUNG frame. Ensure it sits flush and securely.
- AeroTec 04 Integration: Insert the AeroTec 04 awning control unit into the intermediate frame. Follow the specific installation instructions provided with the AeroTec 04 unit for proper connection and seating.
- Afsluttende samling: Once the AeroTec 04 is securely in place within the intermediate frame, proceed with the final assembly of the outer frame and cover plate according to the JUNG switch series instructions.
- Surface-Mounted Installation (Optional): If installing in a surface-mounted configuration, use the appropriate JUNG surface-mounted cap (e.g., AS 581 A..) to house the intermediate frame and control unit.
Note: Always refer to the specific wiring and safety guidelines provided with the AeroTec 04 awning control unit and your JUNG switch series for complete installation instructions.
Operation
The JUNG AAT581ZWW intermediate frame is a passive component that serves as a housing and mounting solution for the AeroTec 04 awning control unit. It does not have active operational functions itself.
The operation of your awning system will be controlled entirely by the AeroTec 04 unit and any associated JUNG control elements (e.g., switches, sensors) installed within the system. Refer to the user manual for the AeroTec 04 for detailed operational instructions.
Opretholdelse
The AAT581ZWW intermediate frame requires minimal maintenance. Regular cleaning can help preserve its appearance and functionality.
- Rensning: Brug en blød, damp cloth to wipe the surface of the frame. Avoid abrasive cleaners or solvents, as these may damage the finish.
- Inspektion: Periodically inspect the frame for any signs of physical damage, cracks, or discoloration. If damage is observed, consider replacing the frame to ensure the continued protection and proper seating of the AeroTec 04 unit.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Frame does not fit flush in the wall box/frame. | Incorrect frame series used; obstructions in the wall box; frame misalignment. | Verify compatibility with JUNG AS 500, A 500, A plus, or A creation series. Check for debris or wires obstructing the fit. Realign the frame carefully. |
| AeroTec 04 unit does not sit securely in the intermediate frame. | Incorrect orientation; internal clips/mounts damaged; unit not fully inserted. | Ensure the AeroTec 04 unit is oriented correctly. Inspect the intermediate frame for any damage to its mounting points. Gently but firmly push the unit until it clicks into place. |
| Visible damage or cracks on the frame. | Physical impact; improper handling during installation. | The frame is damaged and should be replaced to maintain aesthetics and protection for the control unit. |
Specifikationer
| Attribut | Detalje |
|---|---|
| Fabrikant | Jung |
| Varenummer | AAT581ZWW |
| Modelnummer | AAT581ZWW |
| Produktdimensioner | 24 x 32 x 32 cm |
| Varens vægt | 9.07 gram |
| Farve | Alpine White |
| Batterier medfølger | Ingen |
| Batterier påkrævet | Ingen |
| Antal pakker | 1 |
| Udgået vare | Ingen |
| ASIN | B0018LIFWU |
| Første ledige dato | 29. april 2008 |
Garanti og support
Specific warranty information for the JUNG AAT581ZWW intermediate frame is not provided in this manual. Please refer to the official JUNG website or contact your local JUNG distributor for detailed warranty terms and conditions.
For technical support or further assistance, please contact JUNG customer service or a qualified electrician.
