Technoline WS 6810 Vejrstation Brugermanual

1. Produktet er slutview

The Technoline WS 6810 amber Weather Station is a sophisticated device designed to provide accurate indoor and outdoor temperature readings, precise timekeeping via DCF-77 radio control, and convenient alarm functions. Its modern design with a warm amber LED display and black high-gloss finish integrates seamlessly into any contemporary home environment. This manual provides detailed instructions for setting up, operating, and maintaining your weather station.

Technoline WS 6810 Weather Station front view with amber LED display showing time and temperatures

Figur 1.1: Forside view of the Technoline WS 6810 Weather Station, displaying indoor and outdoor temperatures, current time, and alarm indicators.

2. Pakkens indhold

Kontroller venligst pakkens indhold omhyggeligt. Hvis der mangler eller er beskadigede dele, skal du straks kontakte din forhandler.

1 x Technoline WS 6810 Temperature Station (Main Unit)
1 x TX96 (TW004) Outdoor Sensor
1 x Power Supply Unit (220V)
1 x Brugermanual (dette dokument)

Note: 3 x AAA Micro LR03 batteries for main unit backup and 2 x AAA Micro LR03 batteries for the outdoor sensor are ikke inkluderet og skal købes separat.

Technoline WS 6810 Weather Station main unit and TX96 outdoor sensor

Figure 2.1: The Technoline WS 6810 main unit alongside its TX96 outdoor sensor.

3. Nøglefunktioner

DCF-77 Radio-Controlled Clock: Automatic time synchronization for precise timekeeping. Includes manual setting option and time zone adjustment (± 1 hour).
Indoor and Outdoor Temperature Display: Monitors and displays current temperatures for both indoor and outdoor environments.
Min / maks temperatur hukommelse: Records and displays the highest and lowest temperatures measured.
Dual Alarm Clocks: Two independent alarms (ALM1, ALM2) with adjustable settings.
Snooze-funktion: Provides a temporary pause for alarms, typically 5 minutes.
Justerbar displaylysstyrke: Two brightness levels for optimal visibility in various lighting conditions.
Bordstativ: Integrated stand for convenient desktop placement.
LED display: Clear, warm amber LED digits for easy readability.

4. Opsætningsvejledning

4.1. Strømforsyning til hovedenheden

Connect the provided power supply unit to the DC IN port on the back of the WS 6810 main unit.
Plug the power adapter into a standard 220V electrical outlet. The display will illuminate.
Til nødstrøm under udgangentages, insert 3 x AAA Micro LR03 batteries (not included) into the battery compartment on the back of the main unit, observing polarity (+/-).

4.2. Installing Batteries in the Outdoor Sensor (TX96)

Open the battery compartment on the back of the TX96 outdoor sensor.
Insert 2 x AAA Micro LR03 batteries (not included), ensuring correct polarity.
Luk batterirummet forsvarligt.

4.3. Initial Synchronization and Sensor Placement

Place the outdoor sensor within effective transmission range (typically up to 30 meters in open air) of the main unit. Avoid placing it near large metal objects, electrical appliances, or direct sunlight.
The main unit will automatically attempt to receive the DCF-77 radio signal for time synchronization and connect with the outdoor sensor. This process may take several minutes. A signal icon will appear on the display once synchronization is successful.
If the outdoor temperature does not appear after a few minutes, press the "SENSOR" button on the main unit to manually initiate a search for the outdoor sensor.

4.4. Time Zone Setting (if required)

If you are in a region where the DCF-77 signal's standard time differs from your local time (e.g., outside Central European Time), you may need to adjust the time zone.

In normal time display mode, press and hold the "SET" button until the time zone offset flashes.
Use the "+" or "-" buttons to adjust the time zone offset in ±1 hour increments.
Press "SET" again to confirm and exit.

Side view of Technoline WS 6810 Weather Station showing control buttons on top

Figur 4.1: Øverst view of the WS 6810, highlighting the control buttons for setup and operation.

5. Betjeningsvejledning

5.1. Vis oplysninger

The large LED display shows the following information:

I: Indendørs temperatur.
UD: Outdoor temperature (from TX96 sensor).
Tid: Current time (radio-controlled).
ALM1 / ALM2: Indicators for Alarm 1 and Alarm 2.
Signalikon: Indicates successful DCF-77 signal reception.
MIN / MAX: Indicators for minimum and maximum temperature records.

5.2. Indstilling af alarmer

The WS 6810 features two independent alarms (ALM1 and ALM2).

Press the "ALARM" button repeatedly to cycle through ALM1, ALM2, and normal time display.
When ALM1 or ALM2 is displayed, press and hold the "ALARM" button until the alarm time flashes.
Use the "+" or "-" buttons to adjust the hour, then press "ALARM" to confirm and move to minutes.
Use the "+" or "-" buttons to adjust the minutes, then press "ALARM" to confirm.
To activate/deactivate an alarm, select ALM1 or ALM2 display, then press the "+" button. An alarm icon will appear/disappear.

5.3. Snooze-funktion

When an alarm sounds, press the "SNOOZE/LIGHT" button to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5 minutes.

5.4. Justering af skærmens lysstyrke

Press the "SNOOZE/LIGHT" button (when no alarm is sounding) to toggle between the two available brightness levels for the LED display.

5.5. Viewing Min/Max Temperatures

Press the "MIN/MAX" button to cycle through the current, maximum, and minimum recorded indoor and outdoor temperatures. To reset the min/max records, press and hold the "MIN/MAX" button while the min/max values are displayed.

6. Vedligeholdelse

Rensning: Tør hovedenheden og udendørssensoren af med en blød kludamp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
Udskiftning af batteri: Replace batteries in the outdoor sensor and main unit (for backup) when the low battery indicator appears on the display or when performance degrades. Always replace all batteries of a set at the same time.
Sensorplacering: Periodically check the outdoor sensor's placement to ensure it is protected from direct sunlight and heavy precipitation for accurate readings and longevity.
Opbevaring: Hvis enheden opbevares i en længere periode, skal alle batterier fjernes for at forhindre lækage.

7. Fejlfinding

Problem	Mulig årsag	Løsning
Intet display på hovedenheden.	Power adapter not connected or faulty; batteries (backup) are dead or incorrectly inserted.	Ensure power adapter is securely plugged in. Check and replace backup batteries, ensuring correct polarity.
Udendørstemperaturen vises ikke eller er unøjagtig.	Outdoor sensor batteries are dead; sensor out of range; interference; sensor not paired.	Replace outdoor sensor batteries. Move sensor closer to the main unit. Avoid placing near electronics. Press "SENSOR" button on main unit to re-establish connection.
Tidspunktet er forkert eller synkroniserer ikke.	Weak DCF-77 signal; interference; incorrect time zone setting.	Relocate the main unit to an area with better signal reception (e.g., near a window, away from electronics). Check time zone setting. Manual time setting is available if radio control fails.
Alarmen lyder ikke.	Alarm is not activated; alarm volume too low (not applicable for this model, but common issue).	Ensure the alarm icon (ALM1 or ALM2) is displayed, indicating activation. Re-set the alarm time.

8. Tekniske specifikationer

Model	WS 6810 amber
Hovedenhedens dimensioner (L x B x H)	28.5 x 7 x 5.5 cm (ca. 11.2 x 2.8 x 2.2 tommer)
Vægt af hovedenhed	500 g (ca. 1.1 lbs)
Outdoor Sensor (TX96) Dimensions (L x W x H)	50 x 22 x 104 mm (ca. 2.0 x 0.9 x 4.1 tommer)
Power Supply (Main Unit)	220V AC Power Adapter (included)
Backup Power (Main Unit)	3 x AAA Micro LR03 batterier (medfølger ikke)
Strømforsyning (udendørs sensor)	2 x AAA Micro LR03 batterier (medfølger ikke)
Display Type	LED (rav)
Tidssynkronisering	DCF-77 Radio Controlled
Temperature Range (Indoor)	(Information not provided, typical range is 0°C to 50°C)
Temperaturområde (udendørs)	(Information not provided, typical range is -20°C to 60°C)

9. Garanti og support

Technoline products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your retailer or visit the official Technoline webwebsted.

Officiel produktside: http://www.technoline.eu/products/en/4029665068107

Gem venligst dit købsbevis for garantikrav.

	Brugermanual til WS8014 radiostyret ur og vejrstation Brugermanual til den radiostyrede WS8014 ur- og vejrstation, der dækker funktioner, opsætning, betjening, specifikationer og sikkerhedsoplysninger.
	Brugsanvisning til trådløs 868 MHz vejrstation Omfattende brugsanvisning til den trådløse 868 MHz vejrstation, der dækker funktioner, opsætning, betjening, vejrudsigter og specifikationer. Indeholder detaljer om overvågning af indendørs og udendørs temperatur, DCF-77 radiostyret tid og alarmfunktioner.
	Vejrudsigt Memo Vækkeur Brugsanvisning - TechnoLine Omfattende instruktionsmanual til TechnoLine Weather Forecast Memo vækkeur, med detaljer om opsætning, funktioner, radiostyret tid, vejrudsigt, alarmfunktioner og specifikationer.
	Memo vækkeur brugermanual: Radiostyret tid og funktioner Omfattende betjeningsvejledning til Memo vækkeuret, med detaljerede beskrivelser af funktioner, opsætning, radiostyret tidsmodtagelse, manuel tidsindstilling, alarmfunktioner, vedligeholdelse og specifikationer.
	Funkwecker mit Projektion WT519 Brugermanual Brugermanual til Technoline WT519 projektionsvækkeur, der dækker opsætning, funktionstaster, visningstilstande, tids- og alarmindstillinger samt vigtige brugsnoter.
	TechnoLine WS6620 Vejrstation til stationær brug: Brugermanual og opsætningsvejledning Detaljeret brugsanvisning til TechnoLine WS6620 skrivebordsvejrstation. Lær, hvordan du opsætter, betjener og fortolker vejrudsigter, temperatur, fugtighed og barometertryk. Indeholder vejledning i installation af fjernsensorer, RCC-tidssynkronisering og alarmindstillinger.

Technoline WS 6810 amber