Artemide A009048

Artemide Tizio Classic skrivebord Lamp Instruktionsmanual

Model: A009048

Indledning

This manual provides essential information for the safe and efficient use of your Artemide Tizio Classic Desk Lamp. Please read these instructions thoroughly before installation and operation, and retain them for future reference.

The Artemide Tizio Classic Task Lamp, designed by Richard Sapper in 1972, is recognized for its adjustable design and quality construction. It is a modern design classic, featured in prominent museum collections.

Sikkerhedsinstruktioner

  • Sørg for at lamp is connected to a 110 Volt power supply, suitable for USA and Canadian markets.
  • Do not exceed the maximum compatible wattage of 50 watts for the halogen bulb.
  • Lamp head can become very hot during prolonged use. Avoid direct contact with the lamp head when in operation or immediately after turning off.
  • Always disconnect the power before cleaning or performing any maintenance.
  • This product is designed for indoor use only. Do not expose to moisture or use in wet locations.
  • Holdes væk fra brændbare materialer.
  • Hvis nogen del af lamp is damaged, discontinue use and contact customer support.

Produktkomponenter

The Artemide Tizio Classic Desk Lamp consists of the following main components:

  • Grundlag: Provides stability and houses the transformer.
  • Justerbare arme: Counterbalanced arms for flexible positioning.
  • Lamp Hoved: Contains the halogen bulb and reflector.
  • Lysdæmperkontakt: Integrated control for light intensity.
  • Strømledning: Til tilslutning til en stikkontakt.
Artemide Tizio Classic skrivebord Lamp
Figure 1: Artemide Tizio Classic Desk LampDette billede viser lamp fully assembled, highlighting its adjustable arms, base, and lamp hoved.

Opsætningsinstruktioner

  1. Udpakning: Fjern forsigtigt alle komponenter fra emballagen. Gem emballagen til senere transport eller opbevaring.
  2. Placering: Placer lamp base on a stable, flat surface, such as a desk or table. Ensure adequate space for the adjustable arms to move freely.
  3. Strømtilslutning: Plug the power cord into a standard 110 Volt electrical outlet.
  4. Installation af pære (hvis ikke forudinstalleret):
    • Sørg for at lamp er afbrudt.
    • Gently open the lamp hovedbeklædning.
    • Insert a compatible 50-watt (maximum) halogen bulb (A19 shape size) into the socket. Do not touch the bulb directly with bare hands; use a cloth or glove to avoid oil residue.
    • Luk lamp head cover securely.

Betjeningsvejledning

  1. Tænd/sluk: Lamp is controlled by a dimmer switch, typically located on the base or lower arm. Press the switch to turn the lamp til eller fra.
  2. Justering af lysstyrke: Rotate or press and hold the dimmer switch (depending on model variation) to adjust the light intensity. The lamp offers variable brightness settings.
  3. Placering af Lamp: Tizio lamp features counterbalanced arms that allow for smooth and precise adjustment of the lamp head's position.
    • Grib forsigtigt fat i l'enamp head or the upper arm.
    • Move the arms to achieve the desired height and angle for illumination. The lamp is designed to hold its position once adjusted.
    • Lamp head can be rotated to direct light as needed for task lighting or indirect illumination.

Opretholdelse

  • Rensning:
    • Tag altid stikket ud af lamp før rengøring.
    • Tillad lamp to cool completely if it has been in use.
    • Wipe the metal and plastic surfaces with a soft, dry cloth. For stubborn marks, a slightly damp en klud med mild sæbe kan bruges, efterfulgt af en tør klud.
    • Do not use abrasive cleaners, solvents, or polishes, as these can damage the finish.
  • Udskiftning af pære:
    • Sørg for at lamp is unplugged and the bulb is cool.
    • Åbn lamp hovedbeklædning.
    • Carefully remove the old halogen bulb.
    • Install a new 12V, 50-watt (maximum) halogen bulb (A19 shape size). Use a clean cloth or glove to handle the new bulb.
    • Luk lamp head cover securely.
  • Kabelinspektion: Periodically inspect the power cord for any signs of damage, fraying, or wear. If damage is found, discontinue use and contact a qualified technician or Artemide customer support.

Fejlfinding

ProblemMulig årsagLøsning
Lamp tændes ikke.
  • Ingen strøm til stikkontakten.
  • Pæren er defekt eller løs.
  • Dimmer switch malfunction.
  • Tjek stikkontakten med en anden enhed.
  • Ensure bulb is correctly seated and not burnt out. Replace if necessary.
  • Contact customer support if switch is suspected.
Lyset flimrer eller er svagt.
  • Løs pæreforbindelse.
  • Pære nærmer sig slutningen af ​​sin levetid.
  • Lysdæmper problem.
  • Reseat or replace bulb.
  • Udskift pære.
  • Kontakt kundesupport.
Lamp arms do not hold position.
  • Slid på indvendig mekanisme.
  • This may indicate wear on the counterbalancing system. Contact Artemide customer support for assistance.

Specifikationer

  • Model: A009048
  • Mærke: Artemide
  • Type: Skrivebord L.amp
  • Stil: Classic, Industrial
  • Materiale: Alloy Steel, Aluminum, Plastic (shade)
  • Slutte: Chrome (metal components), Black (shade)
  • Produktdimensioner: 4.25"D x 6"W (Base Diameter: 4.25 Inches)
  • Varens vægt: 10.23 pund
  • Lyskilde: Halogen
  • Pære type: A19 shape size, Max 50 Watts
  • Voltage: 110 volt
  • Kontrolmetode: Touch (Dimmer Switch)
  • Speciel funktion: Justerbar
  • Indendørs/udendørs brug: Kun indendørs
  • Strømkilde: Elektrisk med ledning

Garantioplysninger

Artemide products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Artemide webwebsted. Gem din købsbevis til garantikrav.

Kundesupport

For technical assistance, replacement parts, or any inquiries regarding your Artemide Tizio Classic Desk Lamp, please contact Artemide customer support.

  • Fabrikant: Artemide
  • Webwebsted: www.artemide.com (Besøg venligst den officielle website for contact information specific to your region.)

Relaterede dokumenter - A009048

Preview Artemide Tizio Micro LampInstallations- og brugervejledning
Omfattende guide til Artemide Tizio Micro lamp, der dækker installation, udskiftning af pære, sikkerhedsadvarsler og tekniske specifikationer. Indeholder detaljerede instruktioner og flersproget support.
Preview Artemide Tizio 35 Lamp Installations- og brugervejledning
Comprehensive installation and user guide for the Artemide Tizio 35 lamp, designed by R. Sapper. Features technical specifications, step-by-step assembly instructions, safety compliance information, and contact details for Artemide.
Preview Artemide Tizio LED af Richard Sapper - Produktinformation og betjeningsvejledning
Detaljeret information om Artemide Tizio LED lamp designet af Richard Sapper, inklusive betjening, sikkerhedsadvarsler, udskiftning af LED'er og overholdelse af regler. Lær, hvordan du bruger og vedligeholder din Tizio LED.
Preview Artemide Tolomeo Decentrata Lamp Bøjningsvinkler og justeringer
Detaljeret vejledning, der illustrerer bøjningsvinkler og rotationsjusteringer for Artemide Tolomeo Decentrata lamp, visasing dens fleksibilitet og bevægelsesområde.
Preview Artemide Tolomeo Midi LED: Installations- og betjeningsvejledning
Omfattende guide til Artemide Tolomeo Midi LED lamp, dækker installation til forskellige monteringstyper (bord, væg, kl.amp(gulv), betjening, dæmpning og udskiftning af LED-lys. Indeholder sikkerhedsadvarsler og tekniske specifikationer.
Preview Artemide Talak Professional LED Desk Lamp Installations- og monteringsvejledning
Comprehensive guide for installing and assembling the Artemide Talak Professional LED desk lamp. Covers various mounting options including floor stand, wall mount, and desk clamp, along with electrical connection and operation.